FLEXISPOT Ergonomic Office Chair OC1 SD User Manual

1. Introduktion

Thank you for choosing the FLEXISPOT Ergonomic Office Chair OC1 SD. This manual provides essential information for the safe assembly, operation, and maintenance of your new office chair. Please read these instructions carefully before use and retain them for future reference.

2. Vigtige sikkerhedsoplysninger

ADVARSEL:

• Overskrid ikke den maksimale vægtkapacitet på 300 pund.
• Ensure the chair is properly assembled before use to avoid instability.
• Hold alle emballagematerialer væk fra børn for at undgå kvælningsfare.
• Use the chair only for its intended purpose as an office or task chair.

3. Pakkens indhold

Før montering skal du kontrollere, at alle komponenter er til stede. Hvis der mangler eller er beskadigede dele, bedes du kontakte kundesupport.

• Chair Backrest (Mesh)
• Seat Cushion (Memory Foam)
• Armrests (4D Flip-up, Left and Right)
• Nakkestøtte
• Gas Lift cylinder
• Chair Base (Nylon)
• Hjul (hjul)
• Lumbar Support Mechanism
• Monteringsværktøj (unbrakonøgle, skruer)
• Brugervejledning (dette dokument)

4. Monteringsvejledning

Assembly typically takes 20-30 minutes. It is recommended to assemble the chair on a soft, clean surface to prevent damage.

1. Fastgør hjul til basen: Insert the casters into the holes at the end of each leg of the chair base until they click securely into place.
2. Indsæt gasløft: Placer gasløftecylinderen i det midterste hul på stolebasen.
3. Samling af sæde og ryglæn: Attach the seat cushion to the backrest using the provided screws and Allen wrench. Ensure all connections are tight.
4. Installer armlæn: Secure the 4D flip-up armrests to the seat assembly using the designated screws.
5. Attach Lumbar Support: Connect the lumbar support mechanism to the backrest as indicated in the diagrams.
6. Mount Headrest: Attach the headrest to the top of the backrest, ensuring it is aligned correctly for secure fastening.
7. Connect Top to Base: Placer forsigtigt det samlede sæde og ryglæn på gasløftcylinderen, og sørg for, at det er centreret og stabilt.

Image: The FLEXISPOT Ergonomic Office Chair OC1 SD, fully assembled, with a separate headrest and gift box, indicating included components.

5. Betjeningsvejledning

Your FLEXISPOT Ergonomic Office Chair OC1 SD offers multiple adjustments to customize your seating experience.

5.1. Sædehøjdejustering

To adjust the seat height, locate the lever under the right side of the seat. Pull the lever up while seated to lower the seat, or pull it up while standing to raise the seat. Release the lever at your desired height.

5.2. Backrest Recline and Tilt Tension

The chair backrest can recline from 90° to 120°. Use the lever on the left side of the seat to lock or unlock the recline position. The tilt tension knob, located under the front of the seat, allows you to adjust the resistance of the recline function. Turn clockwise to increase tension, counter-clockwise to decrease.

Image: Visual guide illustrating the chair's tilt function, ranging from 90 to 120 degrees, along with the controls for tilt tension and back angle adjustment.

5.3. 4D Flip-up Armrests

The armrests can be adjusted in four dimensions: height, depth, pivot, and width. They can also be flipped up completely to save space, allowing the chair to be pushed closer to a desk or stored compactly.

Image: A visual representation of the chair's 4D flip-up armrests, highlighting their ability to be raised for space-saving purposes, with the chair positioned near a desk in a bedroom setting.

5.4. 2D Lumbar Support

The lumbar support can be adjusted vertically and horizontally to provide precise support to your lower back. Use the knobs or levers on the backrest to position the lumbar support to your comfort.

Billede: En detaljeret view of the chair's 2D adjustable lumbar support, illustrating its vertical (up/down) and horizontal (front/rear) movement capabilities for accurate waist support.

5.5. 2D justerbar nakkestøtte

The headrest can be adjusted in two dimensions: height and angle. Adjust it to support your neck and head comfortably, especially when reclining.

Image: A diagram detailing the 2D adjustable headrest, showing its 1.2-inch vertical adjustment and 45-degree rotation for precise support.

6. Vedligeholdelse

Regular maintenance ensures the longevity and optimal performance of your chair.

• Rensning: For the mesh and fabric components, dry clean or wipe clean with a damp klud og mild sæbe. Undgå skrappe kemikalier.
• Hjul: Periodically check casters for hair or debris that may hinder smooth rolling. Clean as needed.
• Fastgørelsesmidler: Every few months, check all screws and bolts to ensure they are tight. Retighten if necessary.
• Bevægelige dele: Avoid applying excessive force to adjustment levers and knobs.

7. Fejlfinding

Hvis du støder på problemer med din stol, kan du se følgende almindelige problemer og løsninger:

• Stolen er ustabil eller vaklende: Ensure all assembly screws are securely tightened. Check that the gas lift is fully inserted into the base.
• Chair creaks during movement: This can sometimes occur due to loose connections. Re-tighten all screws, especially those connecting the seat and backrest to the mechanism. Applying a small amount of silicone lubricant to moving metal parts may also help.
• Adjustments are not working: Verify that no debris is obstructing the levers or mechanisms. Ensure the tilt lock is disengaged if you are trying to recline.
• Hjulene ruller ikke jævnt: Inspect casters for trapped hair, dust, or other debris. Clean them thoroughly.

If problems persist after attempting these solutions, please contact FLEXISPOT customer support.

8. Specifikationer

Image: Detailed dimension diagram for the FLEXISPOT Ergonomic Office Chair OC1 SD, including height, width, depth, and maximum load capacity of 300 lbs.

9. Garanti og support

This FLEXISPOT Ergonomic Office Chair OC1 SD comes with a livstidsgaranti. If you encounter any quality problems or require support, please do not hesitate to contact our professional after-sales team.

FLEXISPOT values your feedback and is committed to providing excellent service. For assistance, product inquiries, or suggestions for improvement, please visit the official FLEXISPOT webhjemmeside eller kontakt deres kundeservice direkte.