Betta Extended Anti-Stranding Bumper Bars til Robot Pool Skimmere - Brugsanvisning

1. Introduktion

This manual provides instructions for the installation and maintenance of the Betta Genuine Robotic Pool Skimmer Extended Anti-Stranding Bumper Bars. These bumper bars are designed to enhance the anti-stranding capabilities of your Betta robotic pool skimmer, ensuring more efficient and uninterrupted operation.

2. Produktet er slutview

The Betta Extended Anti-Stranding Bumper Bars are official replacement parts for Betta Robotic Pool Skimmers. This set includes four (4) bumper bars, each extending up to 2.5 inches. This extended length provides improved protection against the skimmer becoming stranded on pool edges or obstacles, compared to the standard 1-inch bumper bars.

Figure 1: Betta Extended Anti-Stranding Bumper Bars (Set of 4)

This image displays the four individual extended bumper bars. They are white, rectangular components designed to attach to the underside of the robotic pool skimmer, providing a physical barrier to prevent the unit from getting stuck.

3. Kompatibilitet

These extended anti-stranding bumper bars are compatible with the following Betta Robotic Pool Skimmer models:

• Betta Flex
• Betta SE Plus
• Betta SE
• Betta 2

4. Installationsvejledning

Follow these steps to replace the standard bumper bars with the extended anti-stranding bumper bars on your Betta robotic pool skimmer.

1. Power Off and Remove Skimmer: Ensure your Betta robotic pool skimmer is powered off and removed from the pool. Place it on a clean, flat surface, preferably upside down, to access the underside.
2. Locate Existing Bumper Bars: Identify the current bumper bars installed on the underside of your skimmer. There are typically four attachment points.
3. Remove Old Bumper Bars: Gently but firmly pull each existing bumper bar straight out from its mounting slot. They are designed to be removable. Avoid twisting or excessive force to prevent damage to the skimmer's housing.
4. Insert New Extended Bumper Bars: Take one of the new extended bumper bars. Align the base of the new bumper bar with an empty mounting slot. Push the bumper bar firmly into the slot until it clicks securely into place. Ensure it is fully seated and stable.
5. Repeat for All Bars: Repeat step 4 for the remaining three extended bumper bars, installing them into their respective slots.
6. Bekræft installationen: Once all four extended bumper bars are installed, gently tug on each one to ensure it is securely attached. The skimmer should now have four longer bumper bars extending from its underside.
7. Return Skimmer to Pool: Carefully place your Betta robotic pool skimmer back into the pool and power it on. Observe its operation to confirm the new bumper bars are functioning as intended.

Figure 2: Extended Bumper Bars Installed on Betta Skimmer

This image shows the underside of a Betta robotic pool skimmer with the extended bumper bars properly installed. The bars are visible as four white protrusions, indicating their function in preventing the skimmer from getting stuck.

5. Vedligeholdelse

To ensure the longevity and effectiveness of your extended bumper bars:

• Regelmæssig inspektion: Periodically inspect the bumper bars for any signs of wear, damage, or looseness.
• Rensning: If debris accumulates on the bumper bars, gently wipe them clean with a soft cloth and mild detergent. Rinse thoroughly.
• Udskiftning: If a bumper bar becomes significantly damaged or lost, replace it promptly with a genuine Betta replacement part to maintain optimal anti-stranding performance.

6. Fejlfinding

• Bumper Bar Does Not Fit: Ensure you are using genuine Betta Extended Anti-Stranding Bumper Bars. Verify your skimmer model is listed under the compatibility section. If the issue persists, contact Betta customer support.
• Bumper Bar Feels Loose: Ensure the bumper bar is pushed fully into its mounting slot until it clicks. If it remains loose, inspect the mounting slot for any damage or debris.
• Skimmer Still Strands: While these extended bumper bars significantly reduce stranding, extreme pool conditions or specific obstacles might still cause issues. Ensure the skimmer's wheels and other components are clean and functioning correctly.

7. Specifikationer

8. Kundesupport

For further assistance, warranty information, or to purchase additional genuine Betta replacement parts, please visit the official Betta website or contact Betta customer service.

Du kan også finde mere information og produkter på Betta Store on Amazon.