Accsoon CineView M7 Pro User Manual

1. Introduktion

Tak fordi du valgte Accsoon CinemaView M7 Pro. This device integrates a high-quality camera monitor with a dual-band wireless video receiver, offering a versatile solution for professional video production. It supports both HDMI and SDI inputs/outputs, 4K60 video formats, and features advanced monitoring tools, live streaming capabilities, and camera control functions. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your CineView M7 Pro.

2. Sikkerhedsoplysninger

• Læs alle instruktioner omhyggeligt, før du bruger enheden.
• Udsæt ikke enheden for vand, fugt eller ekstreme temperaturer.
• Use only power adapters and batteries specified by Accsoon.
• Undgå at tabe enheden eller udsætte den for kraftige stød.
• Forsøg ikke selv at skille enheden ad eller reparere den. Kontakt autoriseret servicepersonale.
• Hold enheden væk fra stærke magnetiske felter.
• Sørg for korrekt ventilation under drift for at forhindre overophedning.

3. Pakkens indhold

Verify that all items listed below are included in your package. If any items are missing or damaged, please contact your retailer or Accsoon support.

• CineView M7 Pro Wireless Video Receiver & Camera Field Monitor (2-in-1) x1
• Dual-band Antennas x4
• Brugervejledning x1

Image: Contents of the Accsoon CineView M7 Pro package, showing the monitor, four antennas, and a user manual.

4. Produktet er slutview

4.1 Nøglefunktioner

• Integrated Monitor and Receiver: Functions as both a high-quality camera monitor and a wireless video receiver.
• Dual-Band Wireless System: Utilizes 2.4GHz and 5GHz frequencies for stable, low-latency (60ms) transmission up to 1200ft (350m).
• 4K60 Video Support: Supports video input/output up to 3840x2160 at 60fps via HDMI, and 1080P via SDI/HDMI.
• Alsidig I/O: Features SDI and HDMI input/output, 3.5mm microphone and headphone jacks, USB 3.0 port, and SD card slot.
• Cinema Grade Display: 7-inch 1920x1080 OLED display with 1000nits brightness, 1000:1 contrast ratio, and 127-point 3D LUT support.
• Advanced Monitoring Tools: Includes False Color, Histogram, Zebras, Waveform, and Vectorscope via Accsoon SEE App.
• Live Streaming & Recording: Direct RTMP/SRT live streaming and 4K60 recording to external USB drives/SD cards/SSDs.
• Kamerastyring: Adjust shutter speed, aperture, ISO, and color temperature for compatible Sony and Canon cameras.
• Flere strømindstillinger: Supports NP-F batteries, 6-16.8V DC input, and 5V USB-C power.

4.2 Komponentidentifikation

Billede: Forside view of the Accsoon CineView M7 Pro monitor with its display showing a colorful image, and a partial rear view illustrating the antenna setup.

Billede: Bagside view of the Accsoon CineView M7 Pro highlighting the dual NP-F battery slots, DC power input, USB PD input, and USB-C 5V output ports.

Image: Diagram illustrating the various input/output ports of the CineView M7 Pro, including 3G SDI In/Out, HDMI 2.0 In/Out, SD Card Slot, USB 3.0 Port, 3.5mm Microphone Jack, and 3.5mm Headphone Jack.

5. Opsætning

5.1 Attaching Antennas

Carefully screw the four dual-band antennas onto the corresponding antenna ports on the top of the CineView M7 Pro. Ensure they are securely fastened but do not overtighten.

5.2 Strømforsyning til enheden

The CineView M7 Pro offers multiple power options:

• NP-F batterier: Insert compatible NP-F series batteries (NP-F970/750/550) into the dual battery slots on the rear of the device.
• DC-indgang: Connect a 6-16.8V DC power adapter (5.5mm*2.1mm connector, recommended 9V/3A or 12V/3A) to the DC IN port.
• USB-C PD-indgang: Connect a USB-C power delivery (PD) adapter (recommended 9V/3A, 12V/3A, or 15V/3A) to the USB PD input port.

Note: NP-F batteries, DC cables, and USB-C cables are not included and must be purchased separately.

5.3 Connecting to a Camera/Transmitter

Depending on your intended use, connect the CineView M7 Pro as follows:

• Monitor Mode (Wired): Connect your camera's HDMI or SDI output to the corresponding input port on the CineView M7 Pro. The device will display the input signal.
• Receiver Mode (Wireless): Ensure the CineView M7 Pro is set to RX mode. It will automatically pair with compatible Accsoon CineView transmitters (Master 4K/2 SDI/HE/SE/Quad) based on configured settings. No wired video input is supported in RX mode.

Image: Diagram illustrating the two operational modes: Monitor Mode, where the M7 Pro displays a wired HDMI/SDI source, and Receiver Mode, where it receives a wireless signal from a CineView sender.

6. Betjeningsvejledning

6.1 Tænd/sluk

Tryk og hold tænd/sluk-knappen på siden af ​​enheden nede for at tænde eller slukke den.

6.2 Navigering i brugergrænsefladen

The CineView M7 Pro features an intuitive touchscreen interface. Swipe gestures and taps are used to access menus, adjust settings, and activate monitoring tools. Customizable physical buttons (F1, F2, F3) can be assigned to frequently used functions.

6.3 Monitoring Features (Accsoon SEE App)

Utilize the Accsoon SEE App for advanced monitoring functionalities. Connect your mobile device to the CineView M7 Pro's Wi-Fi network to access tools such as:

• Falsk farve
• Histogram
• Zebraer
• Bølgeform
• Vektorskop
• Fokus peaking
• Zoom
• Aspect Ratio Guides

Image: The Accsoon CineView M7 Pro display showing various monitoring tools and the Accsoon SEE app logo, indicating app integration for advanced features.

6.4 LUT Management

The CineView M7 Pro supports 127-point 3D LUTs and .cdl files for precise color management. You can import custom LUTs to maintain color consistency throughout your workflow. LUTs can be applied for monitoring, recording, streaming, and cloud sharing.

Image: Screenshot of the CineView M7 Pro's interface demonstrating .cdl file support and the ability to import and apply 3D LUTs up to 127 points.

6.5 Live Streaming and Recording

The M7 Pro allows direct recording of 4K60 footage to external USB drives, SD cards, or SSDs in H.264/H.265 formats. It also supports RTMP/SRT live streaming to popular platforms via the Accsoon SEE App.

Note: Live streaming is only available when the CineView M7 Pro is operating in monitor mode with a wired video input.

6.6 Camera Control Functions

Control various camera settings directly from the CineView M7 Pro. This function is compatible with select Sony camera models (FX3, FX30, A7C II, A7SM3, A7M4, A9M3) and Canon camera models (R5, R5M2, R6, R6M2, R7, R8). Functions include:

• Lukkerhastighedsjustering
• Blændekontrol
• ISO justering
• Color Temperature Parameters
• Tryk på Fokus

7. Vedligeholdelse

• Rensning: Use a soft, dry cloth to clean the device. For the screen, use a specialized screen cleaning solution and a microfiber cloth. Avoid abrasive materials or harsh chemicals.
• Opbevaring: When not in use for extended periods, store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries if storing for a long time.
• Firmwareopdateringer: Regularly check the Accsoon official webwebsted for firmwareopdateringer for at sikre optimal ydeevne og adgang til nye funktioner.

8. Fejlfinding

9. Specifikationer

10. Garanti og support

Accsoon products are designed and manufactured to the highest quality standards. For specific warranty details, please refer to the warranty card included with your product or visit the official Accsoon webwebsted.

For technical support, troubleshooting assistance, or service inquiries, please contact Accsoon customer support through their official channels. You can find contact information on the Accsoon webhjemmeside eller gennem din autoriserede forhandler.

Accsoon Official Store: Visit Accsoon Store on Amazon