LoraTap SC500W-V4 WiFi-modul til rulleporte Brugermanual

1. Introduktion

This manual provides detailed instructions for the installation, operation, and maintenance of your LoraTap SC500W-V4 WiFi Module for roller shutters. This module allows you to transform traditional roller shutters into smart, controllable devices via the Smart Life application and voice commands.

2. Produktet er slutview

The LoraTap SC500W-V4 is a compact WiFi module designed for integration behind existing 2-button rocker or push-button switches. It enables precise control of roller shutters from 0% to 100% via a smartphone application or voice assistants like Alexa. The module operates on a 2.4 GHz WiFi network and does not require a separate hub.

Nøglefunktioner:

• Compact size (47 × 48 × 16 mm) for easy installation.
• Precise 0-100% positioning control.
• Compatible with Smart Life app for remote control.
• Voice control support with Amazon Alexa.
• Customizable schedules and scene automation.
• Supports 2-button rocker and momentary switches.
• Compatible with 230V motors up to 300W.

3. Sikkerhedsoplysninger

WARNING: Electrical installation should only be performed by a qualified electrician. Ensure power is disconnected at the main circuit breaker before any installation or maintenance work.

• Do not exceed the maximum load of 300W.
• Ensure proper wiring connections to prevent short circuits or damage.
• Denne enhed er kun til indendørs brug.
• Opbevares utilgængeligt for børn.

4. Pakkens indhold

Tjek venligst pakken for følgende varer:

• LoraTap SC500W-V4 WiFi Module
• Monteringshardware
• Flersproget brugermanual

5. Opsætning og installation

5.1 Ledningsdiagram

Refer to the diagram below for correct wiring. Ensure all connections are secure.

Billede 1: Wiring diagram for the LoraTap SC500W-V4 WiFi Module. It shows connections for Input AC (N, L), Motor (Brown, Black wires to L1, L2), and external switch connections (S1, S2). The module also displays its model number SC500W, voltage range 100-250V, 50/60Hz, and max 300W load.

5.2 Fysisk installation

1. Afbryd strømmen: Turn off the main power supply to the circuit at your home's circuit breaker.
2. Fjern eksisterende switch: Carefully remove your existing 2-button roller shutter switch from the wall box.
3. Tilslut modulet: Connect the LoraTap module according to the wiring diagram (Image 1). Connect the Live (L) and Neutral (N) wires from your power supply to the corresponding terminals on the module. Connect the motor's UP and DOWN wires to L1 and L2 respectively. Connect your existing wall switch to S1 and S2.
4. Indsæt modul: Place the compact module into the standard flush-mounted wall box (Ø 60 mm) behind your existing switch.
5. Geninstaller kontakten: Reattach your existing 2-button switch over the module.
6. Gendan strøm: Tænd for hovedstrømforsyningen igen.

5.3 Switch Compatibility

The module is compatible with two types of switches:

• Rocker Switch (Wippschalter): Stays in position after being pressed.
• Momentary Switch (Taster): Springs back to its original position after being pressed.

Note: Not compatible with 3-button wall switches.

Billede 2: Illustration showing the LoraTap module's compatibility with a rocker switch (Wippschalter) and a momentary push-button switch (Taster). It explicitly states incompatibility with 3-button wall switches.

5.4 Appinstallation og parring

1. Download app: Download the 'Smart Life' app from your smartphone's app store (iOS or Android).
2. Registrer/Log ind: Opret en konto, eller log ind på din eksisterende Smart Life-konto.
3. Tilføj enhed: In the app, tap '+' to add a new device. Select 'Curtain Switch' or 'Shutter Switch'.
4. Indtast WiFi-oplysninger: Ensure your phone is connected to a 2.4 GHz WiFi network. Enter your WiFi password.
5. Parringstilstand: Follow the app instructions to put the module into pairing mode. This usually involves pressing and holding a button on the module or performing a specific sequence with the connected wall switch until an indicator light flashes rapidly.
6. Fuld parring: The app will detect and connect to the module. Once connected, you can rename the device.

5.5 Kalibrering

Before first use, calibration is essential for accurate 0-100% positioning. If needed, recalibration can be performed at any time through the Smart Life app.

Billede 3: A smartphone screen displaying the Smart Life app interface, showing a roller shutter at 32% open. A note below the image emphasizes the necessity of calibrating the roller shutter before first use for precise control.

6. Betjeningsvejledning

6.1 Manuel kontrol

You can operate the roller shutter using the connected 2-button wall switch as usual. The module will register these actions.

6.2 App Control (0-100% Positioning)

Open the Smart Life app and select your roller shutter module. You can precisely adjust the shutter's position from 0% (fully closed) to 100% (fully open) using a slider or by entering a specific percentage. This allows for fine-tuned light and privacy control.

Billede 4: A woman at an airport lounge using her smartphone to remotely control a roller shutter, demonstrating the remote control capability of the Smart Life app. The app interface shows 'Open' and 'Closing' options.

6.3 Voice Control (Alexa)

Once integrated with Amazon Alexa, you can control your roller shutters using voice commands. Ensure your Alexa device is linked to your Smart Life account.

• "Alexa, open the [Shutter Name]."
• "Alexa, close the [Shutter Name]."
• "Alexa, set [Shutter Name] to 50 percent."

Billede 5: An Amazon Echo Dot device on a table next to a window with a roller shutter. A speech bubble indicates an Alexa command: "Alexa, open the roller shutters to 30%," with an "OK" response, illustrating voice control functionality.

6.4 Scheduling and Scenes

The Smart Life app allows you to create custom schedules and scenes to automate your roller shutters.

• Daily Routines: Set specific times for opening and closing, such as waking up with the sunrise or closing for privacy in the evening.
• Solopgang/solnedgang automatisering: Configure the shutters to automatically adjust based on local sunrise and sunset times.
• Varmestyring: Automate closing during the hottest part of the day to help keep rooms cooler.
• Ude-tilstand: Create scenes to simulate occupancy when you are away, enhancing security.

Billede 6: A woman stretching in bed as natural light enters through partially opened roller shutters. A smartphone screen shows the Smart Life app with settings for sunrise automation, allowing for adjustable offsets (e.g., 5 minutes before/after sunrise) and percentage kontrol.

Billede 7: A dog sleeping peacefully on the floor next to a window with roller shutters closed, illustrating the benefit of automatic closing at 2:00 PM to keep the home cooler during hot afternoons.

7. Vedligeholdelse

The LoraTap SC500W-V4 module requires minimal maintenance. Ensure the area around the module and switch is kept clean and free from dust. Periodically check for firmware updates within the Smart Life app to ensure optimal performance and access to new features.

8. Fejlfinding

• Modulet svarer ikke:
  • Kontroller om hovedstrømforsyningen er tændt.
  • Kontroller, at ledningsforbindelserne er sikre og korrekte.
  • Ensure your WiFi network (2.4 GHz) is active and the module is within range.
  • Forsøg at parre enheden med Smart Life-appen igen.
• Roller shutter not moving correctly (e.g., not reaching full open/close):
  • Perform a calibration process through the Smart Life app.
  • Check for any physical obstructions preventing the shutter from moving freely.
• Stemmestyring virker ikke:
  • Ensure your Alexa device is properly linked to your Smart Life account.
  • Verify the device name in Smart Life matches the name used in Alexa commands.
  • Tjek din internetforbindelse.
• Problemer med app-forbindelse:
  • Confirm your router is broadcasting a 2.4 GHz WiFi signal. The module does not support 5 GHz WiFi.
  • Restart your WiFi router and the module (by cycling power).

9. Specifikationer

10. Garanti og support

For warranty information and technical support, please contact LoraTap directly. Details regarding spare parts availability are not provided. Please refer to the manufacturer's official webwebstedet eller kontaktoplysningerne på din produktemballage for at få hjælp.