Indledning
Thank you for choosing the Polibi Full XL Over Queen Metal Bunk Bed. This manual provides essential information for the safe assembly, operation, and maintenance of your new bunk bed. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Vigtige sikkerhedsoplysninger
- Vægt kapacitet: The upper bunk is designed to support a maximum weight of 400 lbs. The lower bunk is designed to support a maximum weight of 600 lbs. Do not exceed these limits.
- Gelændere: Always use the guardrails on the upper bunk. Ensure they are properly installed and secured before use.
- Stigesikkerhed: Use the integrated ladder for access to the upper bunk. Do not jump on or off the bunk bed.
- Madras størrelse: Use only mattresses that comply with the recommended dimensions for each bunk to ensure proper fit and safety.
- Ventilation: Ensure adequate ventilation around the bunk bed.
- Forsamling: Assembly must be performed by adults. Ensure all hardware is securely tightened before use. Periodically check and re-tighten hardware as needed.
- Ingen hop: Do not allow children to jump on the bunk bed.
- Forbudte genstande: Do not attach or hang items on any part of the bunk bed that are not designed for use with the bed, such as hooks, belts, or ropes, as they may pose a strangulation hazard.
Produktspecifikationer
| Feature | Detalje |
|---|---|
| Model | Full XL Over Queen Metal Bunk Bed |
| Mærke | polybi |
| Materiale | Kraftigt metal |
| Farve | Sort |
| Overordnede mål (L x B x H) | 82.7 cm x 63 cm x 63.7 cm |
| Vægtkapacitet for øverste køje | 400 lbs |
| Vægtkapacitet for nederste køje | 600 lbs |
| Speciel funktion | Noise-Reduced Design, Safety Guardrail |
Pakkens indhold
Before assembly, please ensure all components are present and undamaged. If any parts are missing or damaged, do not proceed with assembly and contact customer support.
- Komponenter til øvre køjesøjleramme
- Komponenter til den nederste køjes ramme
- Integrated Ladder Components
- Autoværn
- Metal Slats (for both bunks)
- Samlebeslag (skruer, bolte, skiver, unbrakonøgle)
- Instruktionsmanual
Monteringsvejledning
It is recommended that two adults assemble this bunk bed. Clear a spacious area for assembly and keep all hardware within reach.
- Udpak og identificer dele: Carefully unpack all components and lay them out. Compare them with the parts list (if provided in the physical manual) to ensure everything is present.
- Samling af den nederste køjesramme: Begin by connecting the side rails and end frames for the lower bunk. Secure all connections with the provided hardware, but do not fully tighten until the frame is complete.
- Montering af lameller i den nederste køjeseng: Once the lower bunk frame is assembled, place and secure the metal slats onto the designated supports. Ensure all slats are evenly spaced and firmly attached.
- Saml den øverste køjestativramme: Repeat the process for the upper bunk frame, connecting the side rails and end frames.
- Montering af lameller i øverste køjeseng: Secure the metal slats for the upper bunk.
- Fastgør øverste køjeseng til nederste køjeseng: Carefully lift the assembled upper bunk frame and align it with the designated connection points on the lower bunk frame. Secure with the appropriate hardware. This step may require two people.
- Installer rækværk: Attach the full-length guardrails to the upper bunk, ensuring they are securely fastened to prevent accidental falls.
- Attach Integrated Ladder: Connect the integrated ladder to the bunk bed frame. Ensure it is stable and securely attached for safe climbing.
- Endelig stramning: Once all components are assembled, go back and fully tighten all screws and bolts. Do not overtighten.
- Inspicere: Perform a final inspection to ensure all parts are correctly assembled, stable, and secure before placing mattresses on the bunks.
Retningslinjer for brug
- Ensure mattresses are properly seated within the frame and do not extend beyond the guardrails on the upper bunk.
- Kun én person må opholde sig i den øverste køje ad gangen.
- Do not use the bunk bed if any part is broken or missing.
- Regularly check all connections and hardware for tightness.
Pleje og vedligeholdelse
- Rensning: Tør metalrammen af med en blød kludamp klud. Undgå at bruge skrappe kemikalier eller slibende rengøringsmidler, da disse kan beskadige overfladen.
- Inspektion: Periodically inspect all structural components, including the frame, slats, ladder, and guardrails, for any signs of wear, damage, or loose connections.
- Hardware: Re-tighten all bolts and screws every 3-6 months to ensure the bed remains stable and secure.
- Miljø: Keep the bunk bed in a dry environment to prevent rust or corrosion.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Sengen føles vaklende eller ustabil | Løse hardwareforbindelser. | Kontrollér og spænd alle bolte og skruer. Sørg for, at alle dele er korrekt justeret. |
| Knirkende lyde | Løse forbindelser eller friktion mellem metaldele. | Tighten all hardware. Apply a small amount of lubricant (e.g., silicone spray) to connection points if noise persists. |
| Ladder feels insecure | Ladder not properly attached or hardware is loose. | Verify the ladder is correctly installed and all attachment hardware is securely tightened. |
| Manglende dele under montering | Emballagefejl eller mistet del. | Do not proceed with assembly. Contact Polibi customer support immediately for replacement parts. |
Garanti og kundesupport
Polibi products are manufactured with quality and durability in mind. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Polibi website. If you have any questions, require assistance with assembly, or need replacement parts, please contact Polibi customer support through the retailer where the product was purchased or via the contact information provided on the Polibi brand store.
For yderligere information kan du besøge Polibi-butik på Amazon.
