Keenso Universal Motorcycle Speedometer Tachometer Oil Level Meter LED Digital Speed Gauge User Manual

1. Introduktion

This manual provides detailed instructions for the installation, operation, and maintenance of your Keenso Universal Motorcycle Speedometer, Tachometer, and Oil Level Meter. This device is designed to provide accurate speed, engine RPM, and oil level readings for motorcycles with a 12V DC power supply.

Billede 1.1: The Keenso Universal Motorcycle Speedometer Tachometer Oil Level Meter. This image shows the speedometer unit with a clear lens and black shell, superimposed on a background of a motorcycle riding at night, illustrating its intended use and visibility.

2. Sikkerhedsoplysninger

Please read all safety instructions before installation and operation. Failure to follow these instructions may result in damage to the product, vehicle, or personal injury.

• Sørg for, at motorcyklens strøm er afbrudt, inden installationen påbegyndes, for at forhindre elektrisk stød eller kortslutninger.
• Verify all wiring connections are secure and properly insulated to avoid electrical hazards.
• Forsøg ikke at modificere enheden. Uautoriserede modifikationer kan ugyldiggøre garantien og udgøre en sikkerhedsrisiko.
• Consult a qualified technician if you are unsure about any part of the installation process.

3. Pakkens indhold

Pakken indeholder følgende varer:

• 1 x Keenso Motorcycle Speedometer Unit

4. Specifikationer

5. Opsætning og installation

This speedometer is designed for universal fitment on motorcycles with a 12V power supply. Follow these steps for proper installation:

1. Montering: Secure the speedometer unit using its existing bracket. Identify a suitable location on your motorcycle's handlebars or dashboard that provides clear visibility and does not obstruct controls. Ensure the mounting is firm and stable.
2. Ledningsføring: Connect the wires according to the diagram and descriptions below. It is crucial to connect each wire to its correct corresponding function on your motorcycle's electrical system.

Billede 5.1: Wiring Diagram. This image illustrates the four main wires extending from the speedometer unit, each labeled with a letter (A, B, C, D) and accompanied by a text description of its function for clear identification during installation.

Ledningsmetode:

• Full Black Wire: Positive Pole - Power Cable (Connect to 12V DC positive power source)
• Grøn ledning: Negative Pole - Black Light Display (Connect to ground/negative terminal)
• Blå/hvid ledning: Positive Pole - Oil Level Display (Connect to oil level sensor signal wire)
• Black/Red Wire: Positive Pole - Tachometer Display (Connect to engine RPM signal wire, typically from ignition coil or ECU)

After connecting all wires, ensure they are properly insulated and secured to prevent damage from vibration or moisture. Reconnect the motorcycle's power and test the unit.

6. Betjeningsvejledning

Once properly installed and powered, the Keenso Motorcycle Speedometer will automatically display the following information:

• Hastighed: The large digital numbers indicate your current speed in kilometers per hour (KM/H).
• Tachometer (RPM): The circular bar graph and smaller digital numbers display the engine's revolutions per minute (RPM).
• Olieniveau: An indicator on the display will show the current oil level, provided the blue/white wire is correctly connected to a compatible oil level sensor.

Billede 6.1: Illuminated Display. This image shows the speedometer unit with its LED display active, clearly indicating digital speed, a tachometer bar graph, and an oil level indicator, demonstrating its functionality during operation.

The clear lens and backlight ensure visibility in various lighting conditions, including direct sunlight and darkness.

7. Vedligeholdelse

To ensure the longevity and optimal performance of your speedometer, follow these maintenance guidelines:

• Rensning: Wipe the clear lens and shell with a soft, damp cloth. Avoid using abrasive cleaners or solvents, which can damage the plastic and finish.
• Inspektion: Periodically check all wiring connections for looseness or corrosion. Ensure the mounting bracket remains secure.
• Beskyttelse: While the unit is designed to withstand slight collisions and is, avoid exposing it to extreme impacts or prolonged submersion in water.

8. Fejlfinding

If you encounter issues with your Keenso Motorcycle Speedometer, refer to the following common troubleshooting steps:

• Intet display/Ingen strøm:
  • Check the main power connection (Full Black Wire) to ensure it is receiving 12V DC.
  • Verify the ground connection (Green Wire) is secure.
  • Inspect the motorcycle's fuse box for any blown fuses related to the accessory power.
• Forkert hastighedsaflæsning:
  • Sørg for, at hastighedssensoren (hvis den er ekstern) er korrekt installeret og fungerer korrekt.
  • Verify the wiring for the speed signal is secure and free from interference.
• Forkert omdrejningstal:
  • Check the Tachometer Display wire (Black/Red Wire) connection to the engine's RPM signal source.
  • Ensure the signal source is compatible with the speedometer's input requirements.
• Oil Level Not Displaying:
  • Confirm the Oil Level Display wire (Blue/White Wire) is correctly connected to a functional oil level sensor.
  • Check the oil level sensor itself for proper operation.

If problems persist after following these steps, please contact Keenso customer support for further assistance.

9. Garanti og support

Keenso products are manufactured to high-quality standards. For specific warranty information and customer support, please refer to the documentation provided with your purchase or visit the official Keenso webwebsted. Gem din købskvittering som købsbevis i tilfælde af garantikrav.

For yderligere support eller forespørgsler kan du besøge Keenso Store on Amazon.