1. Introduktion
Thank you for choosing the iBELL IBL LL5-16 Professional 16-Line Green Beam Self-Leveling Laser Level. This device is designed for precise leveling tasks in various applications, offering high accuracy and ease of use. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting.
2. Sikkerhedsinstruktioner
Please read and understand all safety instructions before operating the device. Failure to follow these instructions may result in laser radiation exposure, electric shock, fire, or serious injury.
- Laserstråling: This product emits Class II laser radiation. Do not stare directly into the laser beam. Avoid direct eye exposure.
- Børn: Opbevar enheden utilgængeligt for børn.
- Ændringer: Do not attempt to modify or disassemble the laser level. Unauthorized modifications can lead to hazardous radiation exposure and void the warranty.
- Driftsmiljø: Use the device in a well-lit area. Avoid using it in explosive atmospheres or in the presence of flammable liquids or gases.
- Strømkilde: Use only the specified rechargeable batteries and charging accessories.
3. Pakkens indhold
Bekræft, at alle nedenstående varer er inkluderet i din pakke:
- iBELL IBL LL5-16 Laser Level
- Rechargeable Batteries (x2)
- Mini stativ
- USB Type-C opladerkabel
- Fjernbetjening
- BMC Box (Storage Case)
- Løftebase
- Thread Mount Tripod Magnet
4. Produktfunktioner
The iBELL IBL LL5-16 Laser Level offers advanced features for professional and DIY applications:
- 16-Line Green Beam: Projects 8 horizontal and 8 vertical green laser lines for comprehensive coverage.
- Høj nøjagtighed: Provides an accuracy of ±1mm at 25 meters.
- Selvnivellering: Automatically levels within a range of ±1°. An alarm sounds if the tilt exceeds this range.
- Dobbelte genopladelige batterier: Includes two high-capacity lithium batteries, offering 4-8 hours of continuous operation.
- Pulstilstand: Enhances laser visibility in bright outdoor conditions or for use with a laser detector (not included) for extended range.
- Kompatibel med stativ: Features a universal tripod mount thread for stable positioning.
- Holdbart design: Lightweight, portable, and built to withstand harsh conditions with a working temperature range of -20°C to 40°C.
- Trådløs fjernbetjening: Giver mulighed for bekvem betjening på afstand.
5. Opsætning
5.1 Batteriinstallation
- Locate the battery compartment on the side or back of the laser level.
- Åbn dækslet til rummet.
- Insert the rechargeable lithium battery, ensuring correct polarity.
- Luk batterirummets dæksel forsvarligt.
- To charge, connect the USB Type-C cable to the charging port on the device and to a suitable USB power adapter.
5.2 Montering af enheden
The iBELL LL5-16 can be mounted in several ways:
- Mini Tripod: Attach the device to the included mini tripod for basic height adjustment and stability on flat surfaces.
- Standard Tripod: Use the 1/4-inch-20 thread on the bottom of the device to mount it on a standard photographic or construction tripod (not included) for greater height and positioning flexibility.
- Magnetisk beslag: Utilize the thread mount tripod magnet to attach the device to metallic surfaces or to a wall bracket for flexible positioning.
6. Betjeningsvejledning
6.1 Tænd/sluk
To power on the device, slide the ON/OFF switch to the 'ON' position. The laser lines will activate, and the device will begin self-leveling. To power off, slide the switch to the 'OFF' position.
6.2 Selvnivellerende tilstand
When powered on, the device automatically enters self-leveling mode. If the device is placed on an uneven surface beyond its ±1° self-leveling range, the laser lines will flash rapidly, and an audible alarm may sound, indicating that the device needs to be adjusted to a more level position.
6.3 Manual Mode (Slope Function)
To use the device in manual mode for projecting lines at an angle, first ensure the device is powered off. Then, slide the ON/OFF switch to the 'ON' position while holding down the 'H' or 'V' button (refer to device diagram for exact button). This will disable the self-leveling function, allowing you to tilt the device to project sloped lines. The laser lines may flash slowly in this mode to indicate that it is not self-leveling.
6.4 Horizontal and Vertical Line Selection
Press the 'H' button on the device or remote control to cycle through horizontal laser line configurations (e.g., one horizontal line, multiple horizontal lines, or off). Press the 'V' button to cycle through vertical laser line configurations.
6.5 Pulstilstand
Activate pulse mode by pressing the dedicated pulse mode button (refer to device diagram). This mode is useful for outdoor applications or when using a laser detector to extend the working range. The laser beam will appear dimmer to the naked eye in pulse mode but is optimized for detection by a receiver.
6.6 Brug af fjernbetjening
The included remote control allows for convenient operation of the laser level from a distance. It typically includes buttons for:
- Horizontal Line Switch: Activates/deactivates horizontal lines.
- Vertical Line Switch: Activates/deactivates vertical lines.
- Indoor/Outdoor Switch: May toggle pulse mode or adjust laser intensity for different environments.
7. Vedligeholdelse
Korrekt vedligeholdelse sikrer din laserniveauers levetid og nøjagtighed.
- Rensning: Tør enheden af med en blød, damp cloth. Do not use abrasive cleaners or solvents. Ensure the laser apertures are clean and free of dust.
- Opbevaring: Store the device in its BMC box in a dry, cool place, away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods.
- Kalibrering: While the device is self-calibrating within its range, periodic professional calibration may be required for critical applications to ensure continued accuracy.
8. Fejlfinding
If you encounter issues with your iBELL LL5-16, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Laser lines are flashing rapidly and/or alarm sounds. | Device is outside its self-leveling range (±1°). | Adjust the device's position to a more level surface until the lines become stable. |
| Laser lines are dim or not visible outdoors. | Bright ambient light. Pulse mode not activated. | Activate pulse mode. Use a laser detector for outdoor use. Work in shaded areas if possible. |
| Enheden tænder ikke. | Low battery. Incorrect battery installation. | Charge the battery. Ensure batteries are inserted with correct polarity. |
| Fjernbetjening virker ikke. | Remote battery low. Obstruction between remote and device. | Replace remote battery. Ensure clear line of sight to the device's sensor. |
9. Specifikationer
| Specifikation | Detalje |
|---|---|
| Model | IBL LL5-16 |
| Laser type | Green Beam 520/505nm |
| Laser klasse | Klasse II |
| Antal linjer | 16 (8 Horizontal & 8 Vertical) |
| Arbejdsområde | 25m / 82ft |
| Nøjagtighed | ±1mm @25m |
| Selvudjævningsområde | ±1° |
| Batteritype | Genopladeligt lithium |
| Runtime | 4-8 hours (with 2 batteries) |
| Opladningsport | USB Type-C |
| Arbejdstemperatur | -20°C til 40°C |
| Produktdimensioner | 30 x 21 x 17 cm |
| Varens vægt | 2.21 kg |
| Oprindelsesland | Kina |
10. Garanti og support
Dette produkt leveres med en 6-måneders servicegaranti from the date of purchase. During this period, any manufacturing defects or service-related issues will be addressed as per our warranty policy. For warranty claims or technical support, please contact the manufacturer or authorized service center.
Importør/Pakker: HITECH MACHINERIES & EQUIPMENT, 1800 103 4090
