WYBOT A1 Trådløs Robot Poolrenser Brugsanvisning

1. Introduktion

Thank you for choosing the WYBOT A1 Cordless Robotic Pool Cleaner. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new pool cleaner. Please read this manual thoroughly before using the product and retain it for future reference.

Figure 1: WYBOT A1 Cordless Robotic Pool Cleaner. This image displays the top-down view of the white WYBOT A1 robotic pool cleaner with its handle extended, showing the power button and LED indicators.

2. Sikkerhedsoplysninger

For at sikre sikker drift og forhindre skader, bedes du overholde følgende sikkerhedsforanstaltninger:

• Læs alle instruktioner omhyggeligt før brug.
• Brug ikke rengøringsmaskinen, når der er personer eller kæledyr i poolen.
• Only use the original charger provided by WYBOT.
• Sørg for, at opladningsporten er tør, før du tilslutter opladeren.
• Do not use the cleaner if the water temperature is outside the recommended range (typically 10°C - 35°C / 50°F - 95°F).
• Opbevar renseren utilgængeligt for børn.
• Forsøg ikke at reparere enheden selv. Kontakt kvalificeret servicepersonale.
• Remove the cleaner from the pool after each cleaning cycle and before charging.

3. Produktet er slutview

The WYBOT A1 is a cordless robotic pool cleaner designed for efficient cleaning of above-ground and flat-bottomed pools. Key features include:

• Dobbelt filtreringssystem: Features a 180µm filter tray and a cotton foam layer for enhanced debris capture, including small leaves, sand, and fine particles.
• Udvidet kørselstid: Up to 120 minutes of cleaning on a single charge, suitable for pools up to 1076 sq.ft.
• Hurtig opladning: Fuldt opladet på cirka 2.5 timer.
• LED-indikatorer: Five distinct LED colors provide clear status updates for battery level, power, low battery, cleaning cycle selection, and errors.
• Edge Cleaning Function: Pauses briefly at pool walls to enhance cleaning along the edges.

Figure 2: WYBOT A1 Long-lasting Power. This image highlights the 120-minute runtime and suitability for pools up to 1076 sq.ft., showing a round pool and a rectangular pool with these specifications.

Figure 3: WYBOT A1 Suitable Pool Surfaces. This image illustrates the cleaner operating on various pool surfaces such as Vinyl, Mosaic, and Cement, indicating its versatility.

4. Opsætning

4.1 Udpakning og komponenter

Carefully remove all components from the packaging. The box should contain the WYBOT A1 cleaner, a charging adapter, a retrieval hook, and the instruction manual.

Figure 4: WYBOT A1 Package Contents. This image shows the WYBOT A1 robotic pool cleaner alongside its packaging box, charging adapter, retrieval hook, and user manual.

4.2 Indledende opladning

Before first use, fully charge the cleaner. Connect the charging adapter to the cleaner's charging port and plug it into a power outlet. The LED indicator will show charging status. A full charge takes approximately 2.5 hours.

Figure 5: WYBOT A1 2.5 Hours Charging. This image depicts the WYBOT A1 cleaner charging on a poolside deck, connected to a wall outlet, emphasizing its fast charging capability.

5. Betjeningsvejledning

5.1 Placering af rengøringsmaskinen i poolen

Once fully charged, select your desired cleaning cycle (see section 5.2). Gently lower the cleaner into the pool. The cleaner will activate automatically once submerged.

5.2 Cleaning Cycles

The WYBOT A1 offers multiple cleaning cycles to suit your needs. Ensure the robot is fully charged before selecting a cycle.

• Cycle 1 (Default): 120 minutes of cleaning on the first day.
• Cyklus 2: 60 minutes of cleaning on the first day, then 60 minutes on the second day (24 hours later).
• Cyklus 3: 40 minutes of cleaning on the first day, 40 minutes on the second day, and 40 minutes on the third day (24 hours between each).
• Cyklus 4: 30 minutes of cleaning on the first day, 30 minutes on the third day, 30 minutes on the fifth day, and 30 minutes on the seventh day (48 hours between each).

Figure 6: WYBOT A1 Customize Cleaning Cycle. This image illustrates the four programmable cleaning cycles available on the WYBOT A1, detailing their duration and frequency.

5.3 LED-indikatorstatus

The cleaner is equipped with LED lights to indicate its current status:

• Grøn: Angiver batteriniveau.
• Blå: Indicates power on/working status.
• Gul: Warns of low battery.
• Lilla: Signifies the selected cleaning cycle.
• Rød: Alerts to machine errors.

Figure 7: WYBOT A1 LED Indicators. This image visually explains the meaning of each of the five LED indicator colors on the cleaner's control panel.

5.4 Edge Cleaning Function

When the cleaner encounters a pool wall, it will briefly pause to enhance its cleaning power along the edge before continuing to clean the pool floor.

Figure 8: WYBOT A1 Edge-enhanced Cleaning Feature. This image demonstrates the cleaner's ability to pause at the pool wall and intensify cleaning along the edges, showing debris being swept away.

5.5 Egnede pooltyper

The WYBOT A1 is ideal for above-ground pools and flat-bottomed in-ground pools with a maximum area of 1076 sq.ft. and water depth less than 2.5 meters. It is not recommended for pools with slopes exceeding 15 degrees or significant bottom wrinkles (greater than 0.2 inches).

Figure 9: WYBOT A1 Suitable Pool Types. This image visually indicates which pool types are suitable (area less than 1076 sq.ft., above-ground pools, water depth less than 2.5 meters) and unsuitable (area greater than 1076 sq.ft., in-ground pools with more than 15-degree slopes).

Figure 10: WYBOT A1 Ideal for Flat-Bottom Pools. This image shows the cleaner navigating a flat-bottom pool, highlighting its ability to handle small protrusions (less than 0.2 inches) and wrinkles (less than 0.2 inches).

6. Vedligeholdelse

6.1 Cleaning the Dual Filtration System

Regular cleaning of the filter system is crucial for optimal performance. The WYBOT A1 features a dual-layer filtration system. If the pool is particularly dirty, clean the filter every 30 minutes to prevent clogging and damage.

1. Fjern rengøringsmidlet fra poolen.
2. Open the cleaner's cover to access the filter tray and cotton foam layer.
3. Remove both the 180µm filter tray and the cotton foam filter.
4. Rinse both filters thoroughly with a hose until all debris is removed.
5. Sørg for, at filtrene er helt tørre, før du sætter dem tilbage i støvsugeren.
6. Close the cleaner's cover securely.

Figure 11: WYBOT A1 Upgraded Double Filtration System. This image illustrates the two-stage filtration process, showing how the 180µm filter captures larger debris and the cotton foam layer captures finer particles, compared to a single-layer filter.

Figure 12: WYBOT A1 Larger Capacity Filter Tray. This image shows the filter tray filled with collected leaves and debris, demonstrating its capacity.

6.2 Generel rengøring og opbevaring

Wipe the exterior of the cleaner with a soft, damp cloth. Store the cleaner in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods. Ensure the battery is partially charged (around 50%) before long-term storage.

7. Fejlfinding

Se følgende tabel for almindelige problemer og løsninger på disse:

If the problem persists after attempting these solutions, please contact WYBOT customer support.

8. Specifikationer

9. Garanti og support

For warranty information, technical support, or service inquiries, please refer to the contact details provided on the product packaging or visit the official WYBOT webwebsted. Behold din købskvittering som købsbevis i tilfælde af garantikrav.