Polibi King Size Luxury Upholstered Platform Bed

1. Sikkerhedsinstruktioner

Læs og forstå venligst alle instruktioner før montering og brug af dette produkt. Manglende overholdelse af disse instruktioner kan resultere i personskade eller beskadigelse af produktet.

• Hold alle små dele og emballagematerialer væk fra børn og kæledyr.
• Assemble the bed on a soft, clean surface to prevent scratches.
• Sørg for, at alle forbindelser er forsvarligt fastspændt før brug. Kontroller med jævne mellemrum og efterspænd efter behov.
• Overskrid ikke den maksimale vægtkapacitet på 1000 lbs.
• Use only the recommended mattress heights (6", 8", 10", 12") for optimal support and fit.
• Stå eller hop ikke på sengerammen.
• Hvis der mangler eller er beskadigede dele, må du ikke fortsætte med monteringen. Kontakt kundesupport med det samme.

2. Pakkens indhold

Your Polibi King Size Luxury Upholstered Platform Bed is shipped in two manageable boxes. Please verify that all components are present before beginning assembly.

Komponenter:

• Polstret sengegavl
• Polstrede sideheste (2)
• Polstret fodbræt
• Centerstøttebjælke
• Solid Wood Slats (20 pieces, 10cm wide)
• Support Legs (various, including adjustable height options)
• Hardware Pack (bolts, washers, nuts, L-wrench, hammer)
• Monteringsvejledning

A power drill (not included) is recommended for quicker assembly.

3. Opsætning og montering

Follow these steps carefully to assemble your Polibi King Size Luxury Upholstered Platform Bed.

1. Udpak og identificer dele: Carefully remove all components from the packaging. Lay them out on a clean, soft surface. Refer to the parts list to ensure all pieces are present.
2. Fastgør sideskinner til hovedgærde: Connect the upholstered side rails to the headboard using the provided hardware. Ensure the connections are firm but do not fully tighten yet.
3. Fastgør fodbræt: Connect the upholstered footboard to the other end of the side rails. Once all four sides are connected, gently tighten all bolts.
4. Installer centerstøttebjælke: Place the center support beam along the length of the bed frame. Secure it to the headboard and footboard brackets using the designated hardware.
5. Fastgør støtteben: Screw the support legs into the designated points on the frame and center support beam. Ensure they are stable and level.
6. Installer lameller: Lay the solid wood slats across the bed frame, fitting them into the designated slots or attaching them with screws if required. Ensure even spacing. The slats are 10cm wide for enhanced support.
7. Adjust Mattress Height (Optional): The bed frame is designed to accommodate mattresses of 6", 8", 10", or 12" heights. Adjust the bed frame installation method as per the separate instructions provided in the package to achieve the desired mattress height. This typically involves adjusting the height of the support brackets for the slats.

4. Betjening og brug

Once assembled, your Polibi King Size Luxury Upholstered Platform Bed is ready for use.

• Madrasplacering: Carefully place your mattress onto the installed slats. The embedded design helps keep the mattress securely in place.
• Vægt kapacitet: The bed frame is designed to support up to 1000 lbs, including the mattress and occupants.
• Silent Sleep: Each support point is covered with sponge stickers to prevent noise, contributing to a quiet sleep environment.

5. Vedligeholdelse

Proper care will extend the life and appearance of your upholstered platform bed.

• Stofpleje: The bed is upholstered with premium, waterproof polyester fabric. For general cleaning, gently wipe with a damp klud. Tør straks spild op med en ren, tør klud. Undgå skrappe kemikalier eller slibende rengøringsmidler.
• Støvning: Regularly dust the headboard and frame with a soft, dry cloth or a vacuum cleaner with a brush attachment.
• Hardwarekontrol: Periodically check all bolts and connections to ensure they remain tight. Re-tighten as needed to maintain stability.
• Undgå direkte sollys: Langvarig udsættelse for direkte sollys kan forårsage falmning af stoffet.

6. Fejlfinding

Se dette afsnit for løsninger på almindelige problemer.

• Knirkende lyde:
  • Sørg for, at alle bolte og skruer er forsvarligt spændt.
  • Check that the slats are properly seated and not rubbing against the frame. The sponge stickers on support points are designed to prevent noise.
  • Verify that the mattress is correctly positioned and not causing friction.
• Sengen føles ustabil:
  • Re-check all connections, especially where the side rails meet the headboard and footboard, and the center support beam.
  • Ensure all support legs are firmly attached and making even contact with the floor.
• Madrasglidende:
  • The embedded design should prevent mattress sliding. Ensure the mattress is fully seated within the frame.
  • Verify that the correct mattress height setting was chosen during assembly.

7. Specifikationer

8. Garanti og support

For specific warranty information and customer support, please refer to the documentation included with your purchase or contact Polibi customer service directly. Keep your purchase receipt for warranty claims.

If you encounter any issues not covered in this manual or require further assistance, please reach out to our support team.

Kontaktoplysninger: Please refer to the contact details provided on the product packaging or the official Polibi webwebsted.