1. Introduktion
Thank you for choosing the Nobsound VU1-W 4-IN-1-OUT Audio Switch. This device is designed to enhance your audio experience by providing a versatile solution for managing multiple audio sources, amplifying headphones, and offering visual feedback through its integrated VU meters. Its elegant walnut wood design complements any desktop HiFi system.
This manual provides detailed instructions for setting up, operating, and maintaining your VU1-W audio switch. Please read it thoroughly before use to ensure optimal performance and longevity of your device.
The Nobsound VU1-W Audio Switch features dual VU meters, a headphone output, input selection buttons, and tone controls, all housed in a walnut wood casing.
2. Hvad er der i æsken
Kontroller venligst indholdet af din pakke for at sikre, at alle varer er til stede:
- 1x VU1-W Audio Switcher
- 1x fjernbetjening
- 1x Type-C Cable (for power)
- 1x brugermanual
This image displays the VU1-W unit, remote control, Type-C power cable, and user manual included in the product package.
3. Produktet er slutview
Familiarize yourself with the various components and controls of your Nobsound VU1-W Audio Switch.
This diagram illustrates the layout of the front and rear panels, labeling all inputs, outputs, and controls for easy identification.
3.1. Frontpanel
- VU-målere (V/H): Display audio input levels.
- 3.5 mm hovedtelefonudgang: Connect headphones for personal listening.
- Input Selection Buttons (1-4): Select the desired audio input source.
- Tænd / sluk-knap: Tænder eller slukker for enheden.
- Basknap: Justerer lavfrekvensresponsen.
- Diskant-knap: Justerer diskantresponsen.
- Lydstyrkeknap: Styrer den overordnede udgangslydstyrke.
3.2. Bagpanel
- RCA Inputs (IN-1, IN-2, IN-3, IN-4): Connect up to four audio sources via RCA cables.
- RCA-udgang (UD): Tilslut til en amplifier, active speakers, or other audio receiving devices.
- MIC/AUX Input Switch: Toggles between microphone pickup mode for VU meters or AUX input.
- DC 5V Power Input (Type-C): Connect the provided Type-C cable to a 5V power adapter (not included).
4. Opsætningsvejledning
Follow these steps to set up your Nobsound VU1-W Audio Switch:
- Placering: Place the VU1-W on a stable, flat surface near your audio sources and output device. Ensure adequate ventilation.
- Tilslut lydkilder: Connect your audio sources (e.g., CD player, PC, phone, tablet) to the RCA inputs (IN-1 to IN-4) on the rear panel using appropriate RCA cables.
- Tilslut lydudgang: Connect the RCA output (OUT) on the rear panel to your amplifier, active speakers, or other audio receiving device.
- Tilslut strøm: Connect the provided Type-C cable to the DC 5V input on the rear panel and plug the other end into a 5V power adapter (e.g., a phone charger, computer USB port).
- Tænd: Press the power button on the front panel to turn on the device. The VU meters will illuminate.
- Hovedtelefontilslutning (valgfrit): If using headphones, plug them into the 3.5mm headphone output on the front panel. Note that connecting headphones will prioritize headphone output, muting the RCA output.
This image shows the rear panel of the VU1-W with multiple RCA cables connected to the input and output ports, demonstrating a typical setup.
The VU1-W is shown connected to a laptop as an audio source and a speaker as the output, illustrating a common desktop audio configuration.
5. Betjeningsvejledning
5.1. Grundlæggende betjening
- Valg af input: Press the corresponding input button (1, 2, 3, or 4) on the front panel to select your desired audio source.
- Lydstyrkekontrol: Drej på BIND knob to adjust the output volume.
- Tone Control: Brug BASS og DISKANT knobs to fine-tune the audio's low and high frequencies according to your preference.
- VU Meter Function: The VU meters will react to the audio signal. Use the MIC/AUX switch on the rear panel to select between direct audio input (AUX) or microphone pickup mode for the VU meters. In MIC pickup mode, the VU meters will respond to ambient sound.
En detaljeret view of the input selection buttons, bass, treble, and volume knobs on the front panel, highlighting the tone control functionality.
5.2. Fjernbetjening
Den medfølgende fjernbetjening giver nem adgang til forskellige funktioner:
- Tænd/sluk: Tænder eller slukker for enheden.
- Valg af input: Directly select inputs 1-4.
- Lydstyrke op/ned: Justerer lydstyrken.
- Stum: Slår lyden fra eller til.
- Gain/Sensitivity/Brightness Settings: The remote allows adjustment of VU meter gain/sensitivity and brightness. Refer to the remote's specific buttons for these functions. Settings are saved after shutdown.
This image shows a hand holding the remote control, pointing it towards the VU1-W unit, demonstrating the convenience of remote operation.
5.3. Produktvideo
This video provides a visual demonstration of the Nobsound VU1-W audio switch, showcasing its features, connections, and operation in a typical audio setup.
6. Vedligeholdelse
To ensure the longevity and optimal performance of your Nobsound VU1-W Audio Switch, follow these maintenance guidelines:
- Rensning: Use a soft, dry cloth to clean the exterior of the device. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the finish.
- Støvbeskyttelse: Keep the device free from dust. If not in use for an extended period, consider covering it.
- Ventilation: Ensure the device has adequate airflow around it to prevent overheating. Do not block ventilation openings.
- Strømafbrydelse: Always disconnect the power cable before cleaning or if the device will not be used for a long time.
7. Fejlfinding
If you encounter any issues with your Nobsound VU1-W, please refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen lydudgang |
|
|
| Forvrænget lyd |
|
|
| VU meters not moving |
|
|
| Fjernbetjening virker ikke |
|
|
Hvis problemet fortsætter efter at have prøvet disse løsninger, bedes du kontakte Nobsounds kundesupport for yderligere assistance.
8. Specifikationer
| Feature | Detalje |
|---|---|
| Produktdimensioner | 4.76 x 2.17 x 3.27 tommer (121 x 55 x 83 mm) |
| Varens vægt | 11.4 ounce (321 g) |
| Modelnummer | XX-VU1-W-AU |
| Mærke | Ingen lyd |
| Farve | Træ |
| Connector Type | 3.5 mm jack, RCA |
| Kompatible enheder | Active Speaker, Amplifier, CD Player, Headphone, PC |
| Kabeltype | RCA, 3.5 mm AUX |
| Hovedtelefonudgang | 50 mW @ 32 Ω |
| Tone Control Range | ±10 dB (Bass/Treble) |
| Strømindgang | DC 5V (via Type-C) |
9. Garanti og support
Nobsound products are designed for reliability and performance. For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Nobsound webwebsted.
If you require technical assistance or have questions regarding your VU1-W Audio Switch, please contact Nobsound customer service. When contacting support, please have your product model number (VU1-W) and purchase details available.
Online ressourcer: For additional information, FAQs, and product updates, please visit the Nobsound-butik på Amazon.
