AVAPOW TJ18 3000A Bilbatteri Booster Jump Starter Brugermanual

1. Introduktion

Thank you for choosing the AVAPOW TJ18 Car Battery Booster Jump Starter. This device is designed to provide a reliable solution for starting vehicles with dead batteries and offers additional functionalities such as a portable power bank and an emergency LED light. Please read this manual thoroughly before use to ensure safe and optimal operation.

The AVAPOW TJ18 features a 3000A peak current, capable of starting 12V vehicles with up to 8.0L gas or diesel engines. It incorporates advanced safety features and a 4-inch digital display for clear status monitoring.

Image 1.1: The AVAPOW TJ18 Jump Starter, smart clamps, and protective carrying case.

2. Produktet er slutview

2.1 Pakkens indhold

The complete premium kit includes:

• AVAPOW TJ18 Booster Pack
• Smart Jumper Cables with Multi-Protection Clamps
• Cigarettænderadapter
• USB-C ladekabel
• Brugermanual
• Premium bæretaske

Image 2.1: All items included in the AVAPOW TJ18 product package.

2.2 Enhedsfunktioner

• 3000A spidsstrøm: Capable of starting 12V vehicles with up to 8.0L gas or diesel engines.
• Dual Smart Modes: Includes Normal Mode for low-voltage batteries and Force Start Mode for completely dead batteries.
• 10-lags sikkerhedsbeskyttelse: Automotive-grade cells and Smart BMS (Battery Management System) with premium clamps provide protection against short circuits, reverse polarity, over-current, over-charge, over-discharge, and more. UL/FCC/CE certified.
• 4-Inch Digital Display: Provides real-time battery level, voltage, and alert indicators for clear monitoring.
• Alsidig kraftcenter: Features USB-C PD 18W input/output, dual USB-A outputs (5V/3A, 9V/2A, 12V/1.5A), and a 12V DC output (12V/10A) for charging phones, laptops, and other 12V devices.
• 200LM Emergency LED Light: Offers Steady, Strobe, and SOS modes for various emergency situations.
• Holdbar konstruktion: Made from flame-retardant ABS+PC material.

Billede 2.2: Overview of the AVAPOW TJ18 device ports and controls.

2.3 Displayindikatorer

Image 2.3: Explanation of the 4-inch smart display indicators.

The 4-inch digital display provides critical information:

• Batteriniveau: Indicated by color (Green: 100%-60%, Orange: 60%-20%, Red: 20%-0%).
• I: Illuminates when the device is being charged.
• UD: Illuminates when the device is powering external devices.
• PARAT: Indicates the device is ready for a normal jump start.
• Forced Start Indicator: Illuminates when Force Start Mode is active.
• Fault Detection Indicator: Alerts to potential issues (e.g., reverse polarity, short circuit).

3. Sikkerhedsoplysninger

ADVARSEL: Læs alle sikkerhedsadvarsler og instruktioner. Manglende overholdelse af advarsler og instruktioner kan resultere i elektrisk stød, brand og/eller alvorlig personskade.

• Do not operate the jump starter if it has been dropped or damaged.
• Start ikke med et frossent batteri.
• Ensure the jump starter is fully charged before use for optimal performance.
• Tilslut clamps correctly: Red to positive (+), Black to negative (-). Reverse polarity will trigger safety protection.
• Tillad ikke den røde og sorte clamps til at røre hinanden, når de er tilsluttet jumpstarteren.
• Opbevares utilgængeligt for børn.
• Use the jump starter in a well-ventilated area.
• Udsæt ikke enheden for vand, fugt eller ekstreme temperaturer.
• If the battery is extremely hot, smoking, or leaking, discontinue use immediately.
• Always remove the jump starter from the vehicle battery within 30 seconds after the vehicle starts.

4. Opsætning og første opladning

4.1 Indledende opladning

Before first use, fully charge the AVAPOW TJ18. Connect the included USB-C charging cable to the USB-C input/output port on the jump starter and plug the other end into a USB wall adapter (not included). The 4-inch display will show the 'IN' indicator illuminated, and the battery level will increase. A full charge typically takes approximately 2.5 hours with an 18W PD charger.

Image 4.1: Charging the AVAPOW TJ18 jump starter.

4.2 Opbevaring af enheden

Store the jump starter in its protective carrying case when not in use. Keep it in a cool, dry place, away from direct sunlight and extreme temperatures. For long-term storage, ensure the device is charged to at least 50% and recharge every 3-6 months to maintain battery health.

5. Betjeningsvejledning

5.1 Jump Starting a Vehicle (Normal Mode)

Use Normal Mode when the vehicle battery is low but not completely dead.

1. Tilslut Clamps: Plug the smart jumper cables into the EC5 output port of the jump starter.
2. Fastgør til batteri: Tilslut den røde clamp to the positive (+) terminal of the vehicle battery and the black clamp til den negative (-) terminal.
3. Tjek display: The jump starter's display will show 'READY' and the green light will be on, indicating a correct connection and readiness to start.
4. Start køretøj: Start dit køretøj inden for 45 sekunder.
5. Fjern Clamps: Når køretøjet starter, skal du straks fjerne klampen.amps from the car battery, then disconnect the cables from the jump starter.

Image 5.1: Steps for jump starting in Normal Mode.

5.2 Jump Starting a Vehicle (Force Start Mode)

Use Force Start Mode only when the vehicle battery is completely dead and the jump starter does not automatically detect it in Normal Mode. This mode bypasses some safety checks, so exercise extreme caution.

1. Tilslut Clamps: Plug the smart jumper cables into the EC5 output port of the jump starter.
2. Fastgør til batteri: Tilslut den røde clamp to the positive (+) terminal of the vehicle battery and the black clamp til den negative (-) terminal.
3. Activate Force Start: Press and hold the 'Force Start' button on the jump starter for 3 seconds. The display will show the 'Forced Start Indicator' and the green light will be on.
4. Start køretøj: Start dit køretøj inden for 45 sekunder.
5. Fjern Clamps: Når køretøjet starter, skal du straks fjerne klampen.amps from the car battery, then disconnect the cables from the jump starter.

Image 5.2: Steps for jump starting in Force Start Mode.

5.3 Brug som powerbank

The AVAPOW TJ18 can charge various electronic devices:

• USB-C PD 18W: Use the USB-C port for fast charging compatible devices or for recharging the jump starter itself.
• Dobbelte USB-A-udgange: Connect your devices using standard USB cables to the USB-A ports (5V/3A, 9V/2A, 12V/1.5A).
• 12V DC udgang: Use the 12V/10A DC output with the included cigarette lighter adapter to power 12V accessories.

When charging external devices, the 'OUT' indicator on the display will illuminate.

Image 5.3: The AVAPOW TJ18 functioning as a portable power bank.

5.4 Brug af LED-lyset

The integrated 200-lumen LED light can be used for illumination in various situations:

• Konstant lys: Press the LED light button once for continuous illumination.
• Strobe lys: Press the LED light button twice for a flashing strobe effect.
• SOS-signal: Press the LED light button three times for the SOS Morse code signal.
• Sluk: Press the LED light button a fourth time to turn off the light.

Image 5.4: The AVAPOW TJ18's 3-in-1 LED emergency light.

6. Vedligeholdelse

• Rensning: Tør enheden af ​​med en tør, blød klud. Brug ikke skrappe kemikalier eller slibende materialer.
• Opbevaring: Store in a cool, dry place between -4°F to 140°F (-20°C to 60°C). Avoid direct sunlight.
• Batteripleje: Recharge the jump starter every 3-6 months, even if not used, to prolong battery life. Keep the battery level above 50% for optimal long-term storage.
• Kabelinspektion: Kontrollér regelmæssigt startkablerne og koblingerne.ampKontroller for tegn på skader, slid eller korrosion. Udskift om nødvendigt.

7. Fejlfinding

• Enheden tænder ikke: Ensure the device is charged. If the battery is completely depleted, it may take a few minutes of charging before the display activates.
• Vehicle Not Starting (Normal Mode):
  • Tjek om clamper sikkert forbundet til de korrekte batteripoler.
  • Ensure the jump starter has sufficient charge (above 20%).
  • If the battery is completely dead, try Force Start Mode (Section 5.2).
• Fault Detection Indicator On: This indicates a safety protection has been triggered (e.g., reverse polarity, short circuit). Disconnect the clamps, check connections, and try again.
• Charging Slow or Not Charging: Ensure the USB-C cable is properly connected and the wall adapter provides sufficient power (preferably 18W PD).
• LED lys virker ikke: Press the LED light button firmly and cycle through the modes. Ensure the device has some charge.

If issues persist, please contact AVAPOW customer support.

8. Specifikationer

9. Garanti og support

9.1 Garantioplysninger

The AVAPOW TJ18 Jump Starter comes with a manufacturer's warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included in your product packaging or visit the official AVAPOW webwebsted. Gem din købsbevis til garantikrav.

9.2 Kundesupport

For technical assistance, troubleshooting, or any questions regarding your AVAPOW TJ18 Jump Starter, please contact AVAPOW customer support through their official webwebstedet eller kontaktoplysningerne i din produktdokumentation.