1. Vigtige sikkerhedsoplysninger
Please read and understand all safety warnings and instructions before assembling, operating, or servicing this appliance. Failure to follow these instructions could result in fire, explosion, serious injury, or death.
- KUN TIL UDENDØRS BRUG: This appliance is designed for outdoor use in well-ventilated areas. Do not use in garages, sheds, or any enclosed areas.
- GAS LEAK CHECK: Always perform a leak test after connecting the gas cylinder. Use a soapy water solution; bubbles indicate a leak. Never use an open flame to check for leaks.
- VENTILATION: Ensure adequate ventilation to prevent carbon monoxide buildup.
- KLART TIL BRÆNDBARE: Maintain a minimum distance of 36 inches (91 cm) from the sides and rear of the appliance to any combustible materials.
- BØRN OG KÆLEdyr: Hold børn og kæledyr væk fra apparatet under drift og mens det køler af.
- BRÆNDSTOFTYPE: This stove is designed for use with LPG (Liquid Propane Gas) only. Do not attempt to use other fuels.
- STABLE SURFACE: Always operate the stove on a level, stable, non-combustible surface.
2. Produktet er slutview
The BESTFIRE BFGY72 Portable Dual-Burner Propane Stove is a robust and efficient cooking solution for outdoor enthusiasts. Constructed from durable stainless steel, it features two high-power burners with auto-ignition for convenient and reliable operation.

Figure 2.1: The BESTFIRE BFGY72 Dual-Burner Propane Stove, showcasing its stainless steel construction and included gas hose with regulator.
Nøglefunktioner:
- High-Power Dual Burners: 23,000 total BTU output for rapid heating.
- Auto-Ignition: Twist-to-start mechanism for easy lighting without matches.
- Holdbar konstruktion: Stainless steel body resists rust and scratches.
- Bærbart design: Compact dimensions (28" L x 14.5" W x 5" H) with non-slip rubber legs.
- Komplet sæt: Includes regulator and hose for immediate use (propane tank not included).

Figure 2.2: Detailed diagram of the stove's components and features.
3. Opsætning og installation
Follow these steps to safely set up your BESTFIRE propane stove.
3.1 Udpakning og første inspektion
- Carefully remove the stove and all components from the packaging.
- Inspect for any damage during shipping. Do not use if damaged.
- Ensure all accessories are present: stove unit, gas hose, and regulator.
Video 3.1: Visual guide on unpacking and initial setup of the BESTFIRE 2 Burner Propane Gas Cooktop.
3.2 Installation af komponenter
- Install Rubber Pads: If not pre-installed, attach the four rubber pads to the bottom of the stove for stability.
- Install Burner Rings/Supports: Place the metal burner rings securely over each burner head.

Figur 3.1: Nærbillede view of the burner assembly and footrest details.
3.3 Tilslutning af gasforsyningen
- Connect Hose to Stove: Securely attach the gas hose to the gas inlet on the side of the stove. Use a wrench to tighten the connection, ensuring it is snug but do not overtighten.
- Connect Regulator to Propane Tank: Attach the regulator to a standard QCC1/Type1 propane tank cylinder (5-40LB capacity). Ensure the regulator control knob and cylinder valve are in the OFF positions before connecting. Hand-tighten the connection.

Figure 3.2: Proper connection of the CSA certified regulator and hose to a propane tank.
VIGTIG: The propane tank is not included with the stove.
4. Betjeningsvejledning
4.1 Optænding af brændere
- Ensure the stove is on a stable, level surface and all gas connections are secure.
- Åbn langsomt ventilen på propantanken.
- Push in and turn the desired burner knob counter-clockwise to the HIGH position. You should hear a clicking sound from the auto-ignition.
- If the burner does not ignite within 5 seconds, turn the knob to OFF, wait 5 minutes for gas to dissipate, and repeat the process.
- First Use Note: During the first use, it may take several attempts (up to 7 or more ignitions) for the burner to light, as air needs to be purged from the gas hose.
Video 4.1: Demonstration of connecting the gas hose and igniting the burner, including the initial ignition process.
4.2 Justering af flammen
Once lit, rotate the burner knob to adjust the flame intensity from HIGH to LOW as needed for cooking.
4.3 Slukning af komfuret
- Drej alle brænderknapper til OFF-positionen.
- Luk ventilen på propantanken.
5. Vedligeholdelse og rengøring
Regelmæssig vedligeholdelse sikrer din brændeovns levetid og sikre drift.
5.1 Cleaning the Stove Surface
- Lad ovnen køle helt af, inden den rengøres.
- Tør overfladen af rustfrit stål af med adamp klud og mildt rengøringsmiddel. Undgå slibende rengøringsmidler, der kan ridse overfladen.
- Remove burner rings and clean separately if necessary.
5.2 Brændervedligeholdelse
- Periodically check burner ports for blockages (e.g., food debris). Use a small wire or needle to clear any obstructions.
- Ensure the burner heads are properly seated after cleaning.
6. Fejlfinding
Hvis du støder på problemer med din ovn, kan du se følgende almindelige problemer og løsninger:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Brænderen tændes ikke |
|
|
| Svag eller inkonsekvent flamme |
|
|
| Gaslugt registreret | Gaslækage | Immediately turn off gas supply, ventilate area, and perform a leak test with soapy water. Do not use the stove until the leak is resolved. |
7. Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | BFGY72 |
| Mærke | BESTFIRE |
| Samlet BTU-output | 23,000 BTU |
| Antal brændere | 2 |
| Materiale | Rustfrit stål |
| Produktdimensioner | 14.5" D x 28" B x 5" H |
| Varens vægt | 9.92 pund |
| Strømkilde | Gas Powered (LPG) |
| Tændingstype | Auto Ignition (Piezo) |
| Inkluderede komponenter | Adjustable PSI Regulator, Gas Hose |
8. Garanti og support
For warranty information, technical support, or replacement parts, please contact BESTFIRE customer service. Refer to your product packaging or the official BESTFIRE webwebsted for kontaktoplysninger.





