Indledning
This manual provides essential information for the safe and effective use of your Fanhua Replacement Battery. Please read this manual thoroughly before installation and operation to ensure optimal performance and longevity of the battery.
This battery is designed as a direct replacement for select robot vacuum cleaner models, offering reliable power for extended cleaning cycles.
Produkt overview
The Fanhua Replacement Battery is a rechargeable Lithium-Ion battery designed for specific robot vacuum cleaner models. It features a 14.8V voltage and a 3200mAh capacity, providing extended operating time for your device. The package includes the battery and a small screwdriver for installation.
The battery features a specific connector design and compact dimensions (approximately 2.79 x 1.49 x 1.45 inches) to ensure a precise fit within compatible robot vacuum cleaner models. The connector is designed for secure and easy installation.
This replacement battery offers a higher capacity of 3200mAh compared to some standard 2600mAh batteries, which translates to longer working times for your robot vacuum cleaner on a single charge.
The battery is equipped with multiple protection features to ensure safe operation and extend its lifespan. These include safeguards against over-voltage, short-circuits, over-temperature, and over-charging.
Kompatibilitet
This Fanhua Replacement Battery is compatible with the following robot vacuum cleaner models:
- Coredy R750-2200pa
- Coredy G800
- Coredy G850
- Kyvol E20
- Kyvol E30
- Kyvol E31
Important: This battery is NOT compatible with Coredy R750-1600pa 2600aAh models.
Always verify your robot vacuum cleaner's model number before purchasing and installing a replacement battery to ensure full compatibility.
Opsætning og installation
Before installing the new battery, ensure your robot vacuum cleaner is turned off and disconnected from any power source.
- Locate the battery compartment on your robot vacuum cleaner. This is typically on the underside of the device.
- Using the provided screwdriver, carefully remove the screws securing the battery compartment cover.
- Gently remove the old battery. Disconnect its connector from the vacuum cleaner's port.
- Connect the new Fanhua Replacement Battery to the vacuum cleaner's port, ensuring the connector is firmly seated.
- Place the new battery into the compartment, ensuring it fits correctly without forcing.
- Replace the battery compartment cover and secure it with the screws.
- Bortskaf det gamle batteri forsvarligt i henhold til lokale regler.
After installation, it is recommended to fully charge the new battery before its first use.
Betjeningsvejledning
Once the battery is installed and fully charged, your robot vacuum cleaner is ready for operation as per its original manufacturer's instructions.
- Første brug: For optimal battery life, fully charge the battery before the first use.
- Opladning: Always use the designated charger provided with your robot vacuum cleaner.
- Regelmæssig brug: Allow the robot vacuum to complete its cleaning cycle and return to its charging dock.
- Opbevaring: If the vacuum cleaner will not be used for an extended period, it is advisable to fully charge the battery and store the device in a cool, dry place. Recharge the battery every 3-6 months to prevent deep discharge.
Vedligeholdelse og sikkerhedsforanstaltninger
Proper care and adherence to safety guidelines will ensure the longevity and safe operation of your replacement battery.
- Temperatur: Use and store the battery at ambient temperatures between 32-104°F (0-40°C).
- Demontering: Må ikke skilles ad the battery. Disassembly can lead to electric shock, fire, or explosion.
- Forkert forbindelse: Do not connect improperly. Ensure correct polarity during installation.
- Vandeksponering: Do not put the battery in water or expose it to excessive moisture.
- Opladning: Only use the designated charger for charging. Using an incompatible charger can damage the battery or cause a fire.
- Brandfare: Bortskaf ikke batteriet i ild as they may explode. A damaged battery may also explode.
- Metalgenstande: Do not allow metal objects to contact the battery terminals, as this can cause a short circuit.
- Skade: If the battery appears damaged, swollen, or leaks, discontinue use immediately and dispose of it safely.
This product is designed to be eco-friendly. Please ensure proper disposal at the end of its life cycle to prevent environmental pollution.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Batteriet oplades ikke | Incorrect installation; Faulty charger; Battery not fully seated. | Ensure battery is correctly installed and connector is secure. Check if the charger is working. Try re-seating the battery. |
| Kort driftstid | Battery not fully charged; Battery degradation (after long use). | Ensure battery is fully charged before use. If battery is old, consider replacement. |
| Vacuum cleaner not turning on after battery replacement | Battery not connected; Incorrect battery model. | Verify the battery connector is firmly attached. Confirm the battery model is compatible with your vacuum cleaner. |
Specifikationer
| Attribut | Værdi |
|---|---|
| Modelnummer | R750-2200pa (Internal reference, compatible with listed models) |
| Batteritype | Rechargeable Lithium Ion (Li-ion) |
| Voltage | 14.8V |
| Kapacitet | 3200mAh |
| Varens vægt | 6.9 ounce (ca. 195 gram) |
| Pakkedimensioner | 2.79 x 1.49 x 1.45 tommer (ca. 7.09 x 3.78 x 3.68 cm) |
| Fabrikant | Fanhua |
| Anbefalet brug | Robotstøvsuger |
Garanti og support
For information regarding warranty coverage or technical support, please refer to the seller's policy or contact Fanhua customer service through the platform where the product was purchased. Keep your purchase receipt as proof of purchase.
For generelle forespørgsler kan du besøge Fanhua Store on Amazon.
