Indledning
This manual provides detailed instructions for the setup, operation, and maintenance of your Ratakee Digital Alarm Clock Radio H249. Please read this manual thoroughly before using the device to ensure proper functionality and to maximize your user experience. This device features a large LED display, dual alarms, AM/FM radio with presets, adjustable alarm volume, sleep timer, and display dimmer.

Billede: Forside view of the Ratakee Digital Alarm Clock Radio H249, displaying the time 12:00 PM in blue LED digits.
Produktfunktioner overview
- Stort LED display: 6.6-inch screen with 1.6-inch blue LED numbers for clear visibility.
- Dobbelte alarmer: Set two independent alarms with options for beep or radio wake-up.
- AM/FM radio: Digital tuning with frequency ranges FM 87.5-108MHz and AM 520-1710KHz.
- Stationsforudindstillinger: Gem op til 20 AM- og 20 FM-stationer for hurtig adgang.
- Justerbar alarmvolumen: Alarm volume can be set from levels 5 to 15.
- Sleep timer: Program the radio to turn off automatically after 10-90 minutes.
- Skærmdæmper: Four brightness levels for the LED display.
- Snooze-funktion: Provides an extra 9 minutes of sleep.
- Batteri-sikkerhedskopi: 2 AAA batteries (not included) preserve time and alarm settings during power outages.

Image: Visual representation of the alarm clock's main features: Dual Alarm, AM FM Radio, Volume Control, and Dimmer, with a woman enjoying music in the background.
Opsætning
1. Strømtilslutning
The Ratakee H249 operates on AC power. Connect the provided power cord to the clock radio and then plug it into a standard AC 120V 60Hz wall outlet. The display will illuminate once power is supplied.
2. Installation af batteribackup
For battery backup, insert two (2) AAA batteries (not included) into the battery compartment located on the bottom of the unit. The battery backup maintains time and alarm settings during a power interruption but does not power the clock display or radio functions.
3. Indstilling af starttidspunkt
- Tryk og hold på FASTSAT TIDSPUNKT knappen. Timecifrene vil begynde at blinke.
- Brug VOL+ or VOL- knapperne til at justere timetallet. Vær opmærksom på PM-indikatoren, hvis du indstiller et PM-tidspunkt.
- Tryk på FASTSAT TIDSPUNKT knappen igen. Minuttiffrene vil blinke.
- Brug VOL+ or VOL- knapper for at justere minutterne.
- Tryk på FASTSAT TIDSPUNKT knappen én gang til for at bekræfte og afslutte tidsindstillingstilstanden.
Betjeningsvejledning
1. Indstilling af alarmer (Alarm 1 og Alarm 2)
The clock radio features two independent alarms. The process is identical for both.
- Tryk og hold på ALARM1 (eller ALARM2) button. The alarm hour digits will flash.
- Brug VOL+ or VOL- buttons to set the desired alarm hour. Observe the PM indicator.
- Tryk på ALARM1 (eller ALARM2) button again. The alarm minute digits will flash.
- Brug VOL+ or VOL- knapperne til at indstille de ønskede alarmminutter.
- Tryk på ALARM1 (eller ALARM2)-knappen igen for at vælge alarmkilden:
- Bip: A standard alarm tone.
- Radio: Wakes you up to the last tuned radio station.
- Tryk på ALARM1 (eller ALARM2) button one more time to confirm and activate the alarm. An alarm icon will appear on the display.

Image: The alarm clock displaying 7:30, with icons indicating dual alarms are set, positioned on a bedside table next to a person waking up.
2. Justering af alarmlydstyrke
When an alarm is sounding, use the VOL+ or VOL- buttons to adjust the alarm volume between levels 5 and 15.
3. Snooze-funktion
Når en alarm lyder, skal du trykke på den store SNOOZE / DIMMER button to temporarily silence the alarm for 9 minutes. The alarm will sound again after 9 minutes. This can be repeated up to 5 times. To cancel the alarm completely, press any other button (e.g., ALARM1, ALARM2, RADIO).

Image: A hand reaching to press the SNOOZE button on the alarm clock, which shows 8:30, illustrating the snooze function.
4. AM/FM-radiobetjening
- Tryk på RADIO knappen til at tænde eller slukke radioen.
- To tune, press the VOL+ or VOL- buttons to manually adjust the frequency. Press and hold these buttons for automatic scanning to the next available station.
- Indstilling af forudindstillinger: While listening to a desired station, press and hold the FORUDINDSTILLING button. The preset number will flash. Use VOL+ or VOL- to select a preset slot (P01-P20 for AM/FM). Press FORUDINDSTILLING igen for at gemme.
- Genkaldelse af forudindstillinger: Tryk kort på FORUDINDSTILLING knappen for at bladre gennem gemte stationer.
- Adjusting Radio Volume: Brug VOL+ or VOL- buttons when the radio is on to adjust the listening volume.
5. Sleep timer
Sleep-timeren gør det muligt for radioen at spille i et indstillet tidsrum, før den automatisk slukker.
- Mens radioen spiller, skal du trykke på SOVE button (if available, otherwise use a combination like SNOOZE + RADIO, or refer to specific button if different).
- Tryk gentagne gange på SOVE button to cycle through available sleep times (e.g., 10, 20, 30, 60, 90 minutes).
- Radioen slukker automatisk efter det valgte tidspunkt.
6. Skærmdæmper
For at justere lysstyrken på LED-displayet skal du trykke på SNOOZE / DIMMER button (when the alarm is not sounding). Each press will cycle through the four available brightness levels (High, Medium, Low, Off).

Image: The alarm clock displaying 20:00 (8 PM) with a dimmed blue LED display, illustrating the dimmer function for nighttime use.
Opretholdelse
1. Rensning
To clean the clock radio, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents as these can damage the finish. Ensure the device is unplugged before cleaning.
2. Battery Replacement (Backup)
If the time and alarm settings are not retained during a power outage, the AAA backup batteries may need to be replaced. Open the battery compartment, remove the old batteries, and insert two new AAA batteries, observing the correct polarity (+/-). Close the compartment securely.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Urdisplayet er slukket eller fungerer ikke. | Ingen vekselstrøm; strøm udtage; display dimmer set to 'Off'. | Ensure the power cord is securely plugged into a live outlet. Check for power outages. Press the SNOOZE / DIMMER button to adjust display brightness. |
| Time/Alarm settings are lost after a power outage. | Backup-batterierne er døde eller ikke installeret. | Install two fresh AAA batteries or replace existing ones in the battery compartment. |
| Alarmen lyder ikke. | Alarm is not activated; alarm volume is too low; incorrect alarm time. | Ensure the alarm icon is visible on the display. Re-check alarm time and source. Adjust alarm volume (levels 5-15). |
| Dårlig radiomodtagelse. | Antenne ikke strakt ud; interferens; svagt signal. | Fully extend the FM wire antenna. Reposition the clock radio to improve reception. Avoid placing near electronic devices that may cause interference. |
| Radio presets are not saved. | Incorrect saving procedure; power interruption without backup. | Ensure you press and hold the FORUDINDSTILLING button to save, then press again to confirm. Ensure backup batteries are installed and functional to retain settings during power loss. |
Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | Ratakee |
| Modelnummer | H249 |
| Display Type | Digital LED (Blue) |
| Strømkilde | Corded Electric (AC 120V 60Hz) |
| Batteri backup | 2 AAA batteries (not included) for settings retention |
| Produktdimensioner | 6.14 cm B x 3.15 cm H x 2.17 cm D |
| Varens vægt | 4 ounces (0.25 pund) |
| Radio Frequency (FM) | 87.5-108 MHz |
| Radio Frequency (AM) | 520-1710 KHz |
| Særlige funktioner | Adjustable Brightness, Adjustable Volume, Dual Alarms, Radio, Sleep Timer |
| Materiale | Plast |

Image: Dimensional drawing of the alarm clock, indicating its width (6.14in), height (3.15in), and depth (2.17in).
Garanti og support
Garantioplysninger
This Ratakee Digital Alarm Clock Radio H249 comes with a 1 års begrænset garanti fra købsdatoen. Derudover en 90-dages pengene-tilbage-garanti is offered. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or external factors.
Kundesupport
For technical assistance, troubleshooting not covered in this manual, or warranty claims, please contact Ratakee customer support through the retailer's platform or the contact information provided with your purchase. Please have your model number (H249) and purchase date available when contacting support.


