1. Introduktion
This manual provides detailed instructions for the installation, operation, and maintenance of your GAMDIAS Aura GC10m V2 ARGB Micro-Tower Computer Case. Please read this manual thoroughly before beginning installation to ensure proper setup and to maximize the performance and longevity of your system components.
Figure 1: GAMDIAS Aura GC10m V2 ARGB Micro-Tower Computer Case, showcasing its panoramic design and illuminated ARGB fans.
2. Sikkerhedsoplysninger
Overhold følgende sikkerhedsforanstaltninger for at forhindre skader på produktet eller personskade:
- Always disconnect the power supply from the wall outlet before performing any installation or maintenance.
- Handle internal components with care to avoid electrostatic discharge (ESD) damage. Consider using an anti-static wrist strap.
- Keep the case away from water, moisture, and extreme temperatures.
- Sørg for korrekt ventilation for at forhindre overophedning.
- Do not attempt to open or repair the power supply unit (PSU) if it is integrated; refer to qualified service personnel.
- Keep small parts and screws out of reach of children.
3. Pakkens indhold
Bekræft at alle varer er til stede i pakken:
- GAMDIAS Aura GC10m V2 ARGB Micro-Tower Computer Case
- Accessory Box (containing screws, cable ties, and other small parts)
- Brugervejledning (dette dokument)
- Pre-installed ARGB Fans (2 x 120mm side, 1 x 120mm rear)
4. Komponentidentifikation
Familiarize yourself with the various parts of the GAMDIAS Aura GC10m V2 case:
Figur 2: Forside view of the case, highlighting the tempered glass panel.
Figur 3: Bagside view of the case, indicating motherboard I/O cutout, expansion slots, and rear fan mount.
Figure 4: Top I/O Panel featuring USB Type-C, USB 2.0, HD Audio, and LED switch button.
Nøglekomponenter:
- Hærdede glaspaneler: Front and side panels for component visibility.
- I/O-porte: Located on the top panel, includes 1x USB Type-C, 1x USB 2.0, HD Audio, and an LED switch button.
- Fan Mounts: Multiple locations for cooling fans and radiators (Top, Side, Bottom, Rear).
- Drive Bays: Dedicated spaces for 3.5" HDDs and 2.5" SSDs.
- Udvidelsespladser: For graphics cards and other PCIe devices.
5. Opsætningsvejledning
Follow these steps for proper installation of your PC components:
5.1. Forberedelse af sagen
- Placer etuiet på en flad, stabil overflade.
- Carefully remove the tempered glass side panel by unlatching the simple clasp mechanism.
Figure 5: Removing the tempered glass side panel using the clasp mechanism.
5.2. Installation af bundkort
- Install the I/O shield (if not pre-attached to your motherboard) into the rear opening of the case.
- Align your Micro-ATX or Mini-ITX motherboard with the standoffs inside the case.
- Secure the motherboard using the appropriate screws from the accessory box.
5.3. Installation af strømforsyningsenhed (PSU)
- Locate the PSU mounting area, typically at the rear bottom of the case.
- Slide the PSU into position and secure it with screws from the rear of the case.
5.4. Installation af lagerdrev
- For 3.5" HDDs: Install into the designated HDD cage.
- For 2.5" SSDs: Mount onto the dedicated 2.5" drive bays.
- Fastgør drevene med skruer.
5.5. Installation af grafikkort (VGA) og udvidelseskort
- Fjern de nødvendige dæksler til udvidelsespladserne fra bagsiden af kabinettet.
- Indsæt dit grafikkort eller andre udvidelseskort i PCIe-portene på dit bundkort.
- Fastgør kortene med skruer.
5.6. Installation af ventilator og radiator
The case supports various fan and radiator configurations:
- Top: Up to 3 x 120mm or 2 x 140mm fans; Radiator up to 360mm or 280mm.
- Side: Up to 2 x 120mm or 2 x 140mm fans; Radiator up to 240mm.
- Bund: Up to 3 x 120mm or 2 x 140mm fans.
- Bag: 1 x 120mm or 1 x 140mm fan; Radiator up to 120mm.
Figure 6: Cooling support diagram for fan and radiator placement.
5.7. Kabelforvaltning
Brug kabelføringsudskæringerne og fastgørelsespunkterne bag bundkortbakken til at organisere kablerne. Dette forbedrer luftgennemstrømningen og æstetikken.
6. Betjening
6.1. Tænder
After all components are installed and cables are connected, close the side panel. Connect the power cable to the PSU and a wall outlet, then press the power button on the top I/O panel to start your system.
6.2. ARGB-lysstyring
The pre-installed ARGB fans can be controlled via the dedicated LED switch button on the top I/O panel. Press the button to cycle through various lighting modes and colors. For advanced synchronization with other ARGB components, connect the case's ARGB header to a compatible motherboard's 5V 3-pin ARGB header and use the motherboard's software.
7. Vedligeholdelse
7.1. Rensning
- Regularly clean dust filters to maintain optimal airflow.
- Use a soft, dry cloth to wipe down exterior surfaces.
- For interior cleaning, use compressed air to remove dust from components and fan blades. Ensure the system is powered off and unplugged.
7.2. Ventilatorvedligeholdelse
Periodically check fan blades for dust buildup. Clean them gently with a soft brush or compressed air. Ensure fans are securely mounted and free from obstructions.
8. Fejlfinding
Dette afsnit omhandler almindelige problemer, du kan støde på:
| Spørgsmål | Mulig årsag | Løsning |
|---|---|---|
| Systemet tænder ikke | Løse strømkabler, defekt strømforsyning, forkerte forbindelser på frontpanelet. | Check all power connections (PSU to wall, PSU to motherboard/components). Verify front panel header connections to the motherboard. Test PSU if possible. |
| ARGB fans not lighting up | ARGB cables disconnected, incorrect ARGB header connection, faulty fan/controller. | Ensure ARGB cables are securely connected to the controller or motherboard's 5V 3-pin ARGB header. Use the LED switch button. Check motherboard software. |
| Poor airflow/high temperatures | Støvophobning, forkert ventilatororientering, utilstrækkelige ventilatorer. | Clean dust filters and fans. Ensure fans are oriented correctly (intake/exhaust). Consider adding more fans if needed. |
| Side panel difficult to close | Cables obstructing, components not fully seated. | Re-route cables for better management. Ensure all components are fully seated and not protruding. |
9. Tekniske specifikationer
Detailed specifications for the GAMDIAS Aura GC10m V2 ARGB Micro-Tower Computer Case:
Figur 7: Overview of key technical specifications.
| Feature | Specifikation |
|---|---|
| Sagstype | Micro-Tower |
| Bundkort support | Micro-ATX, Mini-ITX |
| Dimensioner (LxBxH) | 42 x 29 x 36.5 cm |
| Varens vægt | 5 kg |
| I/O-porte | 1x USB Type-C, 1x USB 2.0, HD Audio, 1x LED Switch Button |
| Drive Bays | 1 x 3.5" or 1 x 2.5" (HDD Cage), 3 x 2.5" |
| Forudinstallerede ventilatorer | 2 x 120mm ARGB (Side), 1 x 120mm ARGB (Rear) |
| Fan Support (Max) | Top: 3x120mm/2x140mm, Side: 2x120mm/2x140mm, Bottom: 3x120mm/2x140mm, Rear: 1x120mm/1x140mm |
| Radiator Support (Max) | Top: 360mm/280mm, Side: 240mm, Rear: 120mm |
| Højdegrænse for CPU-køler | 165 mm |
| VGA Length Limit | 400 mm |
| PSU-længdegrænse | 160 mm |
| RGB synkronisering | 5V 3-pin adresserbar header |
10. Garanti og support
For warranty information and technical support, please refer to the official GAMDIAS webwebstedet eller kontakt din lokale forhandler. Gem din købsbevis til garantikrav.
Fabrikant: GAMDIAS TAIWAN, No. 113, Jian 2nd Rd., Zhonghe, Dist., New Taipei City 235, Taiwan
Importør (Indien): Allway Distributions Pvt Ltd, No-49, H.B. Samajha Road, Baswangudi, Bengaluru- 560004, Contact -8904307700
