Philips Solar Motion Sensor Outdoor Light (Model 6944403330)

Indledning

This manual provides essential information for the safe and efficient use of your Philips Solar Motion Sensor Outdoor Light. Please read these instructions carefully before installation and operation, and retain them for future reference.

Billede 1: The Philips Solar Motion Sensor Outdoor Light and its retail packaging. The light features a solar panel on top and a motion sensor on the front face.

Opsætning og installation

The Philips Solar Motion Sensor Outdoor Light is designed for easy, wire-free installation. Ensure the light is placed in a location that receives direct sunlight for optimal charging.

Installationstrin:

1. Vælg placering: Select an outdoor area where the solar panel can receive maximum direct sunlight throughout the day. Avoid shaded areas.
2. Markér borepunkter: Use the light fixture to mark the two drilling points on the wall.
3. Bore huller: Drill holes at the marked points. Insert the provided expansion screws into the holes.
4. Monter lyset: Align the light with the expansion screws and secure it using the mounting screws.
5. Anbefalet højde: For optimal motion detection and light coverage, install the light at a recommended height of approximately 8.2 feet (2.5 meters).

Billede 2: A diagram illustrating the easy installation process. It shows the light being mounted to a wall with screws and provides dimensions for the 5.24-inch model (4.37 in height, 5.24 in width, 2.04 in depth).

Betjeningsvejledning

Your Philips Solar Motion Sensor Outdoor Light features a Passive Infrared (PIR) motion sensor and multiple lighting modes for customizable outdoor illumination.

Bevægelsessensor:

The PIR motion sensor accurately detects movements of humans, animals, and cars. It has a detection distance of 6-9 meters (approximately 19.7-29.5 feet) and a 120° detection angle, providing a 180° lighting angle for enhanced safety.

Billede 3: A visual representation of the motion sensor's detection range, showing a maximum sensing range of 29.53 feet and a 120° detection angle. The light provides 240 lumens at 7500K cool daylight when activated.

Belysningstilstande:

The light offers three distinct nighttime lighting modes, selectable via a push button. The light comes set to Off initially. Press the button to cycle through the modes:

1. Sensortilstand: Press once. The light remains off until motion is detected. Upon detection, it illuminates at 100% brightness (240 lumens) for 25 seconds, then turns off.
2. Dæmp tilstand: Press twice. The light stays on at 10% brightness (24 lumens) for 8 hours, then turns off. This mode does not react to motion.
3. Dim + Sensor Mode: Press three times. The light stays on at 3% brightness (8 lumens). When motion is detected, it brightens to 100% brightness (240 lumens) for 25 seconds, then returns to 3% brightness.
4. Slukket: Press four times to turn the light off.

Billede 4: A visual guide to the three lighting modes: Sensor mode (100% brightness on motion), Dim mode (10% brightness always on for 8 hours), and Dim+Sensor mode (3% brightness, increasing to 100% on motion).

Opretholdelse

To ensure optimal performance and longevity of your Philips Solar Motion Sensor Outdoor Light, follow these simple maintenance guidelines:

• Rens solpanel: Tør solpanelet regelmæssigt af med en blød, tør klud.amp klud til at fjerne støv, snavs og affald. Et rent panel sikrer effektiv opladning.
• Batteripleje: The light features a high-capacity 1200 mAh battery. Ensure the light receives adequate sunlight for charging, especially during shorter winter days, to maintain battery health.
• Vejrbestandighed: The light is IP44 rated and constructed from durable ABS and AS polymers, designed to withstand heavy rain, high temperatures, and extreme weather conditions. No special weather-proofing is typically required.

Billede 5: The Philips Solar Light is shown installed on a wall during a rain shower, illustrating its water-resistant design and ability to perform in all weather conditions.

Fejlfinding

If you encounter issues with your Philips Solar Motion Sensor Outdoor Light, refer to the following common problems and solutions:

• Light Not Turning On at Night:
  • Ensure the solar panel is clean and receiving direct sunlight for at least 6-8 hours daily.
  • Verify the light is not in the 'Off' mode. Cycle through the modes using the push button.
  • Check for any obstructions blocking the motion sensor.
• Light is Dim or Runtime is Short:
  • The battery may not be fully charged. Ensure the solar panel has sufficient direct sunlight exposure.
  • Cold weather can affect battery performance.
  • Clean the solar panel to maximize charging efficiency.
• Bevægelsessensor aktiveres ikke:
  • Confirm the light is in 'Sensor Mode' or 'Dim + Sensor Mode'.
  • Sørg for, at detektionsområdet er frit for forhindringer.
  • Test the sensor by walking within its range (6-9 meters).
• Difficulty Identifying Current Mode:
  • To confirm the current mode, take the light into a dark room or cover the solar panel. Press the button once and observe the behavior. Repeat presses to cycle through and identify each mode.

Specifikationer

Detailed technical specifications for the Philips Solar Motion Sensor Outdoor Light (Model 6944403330):

Billede 6: A comparison table highlighting key features of the Philips Solar-powered Wall Light, including brightness (240 Lm), LED units (120 LEDs), lighting modes (3), detection angle (120°), lighting range (29.53 ft), and running time (50 hrs).

Garanti og support

For warranty information or technical support, please refer to the product packaging or contact Philips customer service directly. Keep your purchase receipt as proof of purchase.