OSRAM Endura udendørs solcelledrevet LED-projektor (model 4099854429439) brugsanvisning

1. Introduktion

Thank you for choosing the OSRAM Endura Outdoor Solar LED Projector. This solar-powered floodlight is designed for outdoor use, providing efficient illumination with its integrated PIR motion detector and daylight sensor. The external solar panel and 5-meter connection cable offer flexible installation options. This manual provides essential information for the safe and effective use of your product.

2. Sikkerhedsoplysninger

Please read all safety instructions carefully before installation and operation. Retain this manual for future reference.

2.1 Advarsel om batterisikkerhed

• Opbevar batterier utilgængeligt for børn. Ingestion can lead to chemical burns, perforation of soft tissues, and death. Severe burns can occur within 2 hours of ingestion. Seek immediate medical attention.
• If the battery compartment (if applicable) does not close securely, discontinue use of the product and keep it away from children.
• If you suspect batteries may have been swallowed or placed inside any part of the body, seek immediate medical attention.

2.2 Generelle sikkerhedsretningslinjer

• Maksimal omgivelsestemperatur: Do not operate the product in ambient temperatures exceeding +35 °C.
• Driftshøjde: This product is designed for operation at altitudes up to 2000 meters.
• Udskiftning af batteri: Replacing a battery with an incorrect type may neutralize safety features (e.g., in the case of certain lithium battery types).
• Bortskaffelse af batteri: Do not dispose of batteries in fire or a hot oven, or mechanically crush or cut a battery, as this may result in an explosion.
• Ensure all connections are secure and properly insulated during installation.
• Do not attempt to modify or disassemble the product. Refer all servicing to qualified personnel.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede og ubeskadigede ved udpakning.

• 1x OSRAM Endura Flood Split Solar Sensor 30W Projector
• 1x External Photovoltaic Solar Panel
• 1x fjernbetjening
• 1x 5-meter Connection Cable (connecting projector and solar panel)
• Mounting and connection accessories (screws, anchors, etc.)

Figur 3.1: Contents of the OSRAM Endura Outdoor Solar LED Projector package, showing the projector, solar panel, and remote control.

4. Produktet er slutview

The OSRAM Endura Outdoor Solar LED Projector consists of a main LED floodlight unit and a separate solar panel, connected by a 5-meter cable for flexible placement. It features an integrated PIR motion sensor and a daylight sensor for automatic operation.

Figur 4.1: Example installation of the OSRAM Endura Outdoor Solar LED Projector on a building, demonstrating its application in outdoor environments.

4.1 nøglekomponenter

• LED Projector: The main lighting unit with integrated PIR motion sensor and daylight sensor.
• Solpanel: Collects solar energy to charge the internal battery. Designed for optimal sun exposure.
• 5m Connection Cable: Allows for separate mounting of the projector and solar panel.
• Fjernbetjening: For adjusting sensor settings, brightness, and manual operation.

5. Opsætning og installation

The OSRAM Endura Outdoor Solar LED Projector is designed for straightforward installation. Ensure you have the necessary tools (drill, screwdriver, pencil, measuring tape) before beginning.

5.1 Choosing Installation Locations

• Solpanel: Select a location that receives direct sunlight for the majority of the day to ensure optimal battery charging. Avoid shaded areas.
• LED Projector: Mount the projector in the desired area for illumination, such as building facades, garages, or garden sheds. Consider the detection range of the PIR sensor. The 5-meter cable allows for flexible placement of the projector away from the solar panel.

5.2 Monteringstrin

1. Markér borepunkter: Use the mounting brackets of both the projector and the solar panel to mark the drilling points on the chosen surfaces.
2. Bore huller: Bor huller på de markerede punkter. Indsæt vægankre om nødvendigt.
3. Monter solpanel: Securely attach the solar panel bracket to the wall using the provided screws. Adjust the panel's angle for maximum sun exposure.
4. Mount Projector: Securely attach the projector bracket to the wall using the provided screws. Adjust the projector's angle to cover the desired area.
5. Tilslut kabel: Connect the 5-meter cable from the solar panel to the projector. Ensure a secure and weather-resistant connection.
6. Indledende aktivering: Locate the power button on the projector (often a small, recessed button) and press it to activate the unit. The light may perform a brief test sequence.

Figur 5.1: Dimensional drawing showing the measurements of the projector and solar panel for installation planning.

6. Betjeningsvejledning

The OSRAM Endura Outdoor Solar LED Projector operates automatically based on its integrated sensors and can be further controlled using the provided remote.

6.1 Automatisk drift

• Dagslyssensor: The projector will not activate during daylight hours, conserving battery power. It will only become active when ambient light levels fall below a certain threshold.
• PIR-bevægelsesdetektor: Once active (at night), the projector will automatically turn on when motion is detected within its range. It will remain on for a set duration (adjustable via remote) and then turn off if no further motion is detected.

6.2 Fjernbetjeningsfunktioner

The remote control allows for advanced customization of the projector's operation. Ensure the remote is pointed directly at the projector for optimal response.

• TIL/FRA: Manually turn the projector on or off.
• PRØVE: Activates a test mode for sensor functionality.
• KØRSELSVEJLEDNING: Cycles through different operating modes (e.g., sensor mode, continuous light for a set duration).
• TIME (3H, 5H, 8H): Sets the duration for which the light stays on after motion detection or in continuous mode.
• Brightness Control (+/-): Justerer lysintensiteten (dæmpbar).
• Sensorfølsomhed: Adjusts the sensitivity of the PIR motion detector.

Note: The remote control's effective range may be limited. Ensure direct line of sight to the projector.

7. Vedligeholdelse

Regular maintenance ensures optimal performance and longevity of your solar LED projector.

• Rengøring af solpanelet: Tør solpanelet regelmæssigt af med en blød kludamp klud til at fjerne støv, snavs og affald. Et rent panel sikrer maksimal absorption af sollys og opladningseffektivitet.
• Rengøring af projektoren: Clean the projector lens and housing with a soft, damp klud. Undgå slibende rengøringsmidler eller opløsningsmidler.
• Batteri: The internal battery is designed for long-term use. Do not attempt to replace the battery yourself. Refer to qualified service personnel if battery issues arise.
• Kabelinspektion: Periodically check the connection cable for any signs of wear, damage, or fraying. Ensure connections remain secure and waterproof.

8. Fejlfinding

If you encounter issues with your OSRAM Endura Outdoor Solar LED Projector, refer to the following common problems and solutions.

9. Specifikationer

Technical details for the OSRAM Endura Outdoor Solar LED Projector (Model 4099854429439).

10. Garanti og support

OSRAM provides a 3 års garanti for this product, as indicated on the packaging. For warranty claims or technical support, please contact your retailer or visit the official OSRAM/LEDVANCE webhjemmeside for kundeserviceinformation.

Fabrikant: LEDVANCE
Webwebsted: www.ledvance.com (General information, check for specific support contacts for your region)