HOCHIKI BHC-4111

HOCHIKI BHC-4111 Nødalarm Komposit Enhed Brugermanual

Model: BHC-4111 | Brand: HOCHIKI

Indledning

Welcome to the user manual for the HOCHIKI BHC-4111 Emergency Alarm Composite Device. This manual provides essential information for the safe and effective use of your device. Please read it thoroughly before installation and operation, and keep it for future reference.

Sikkerhedsoplysninger

This section outlines important safety precautions. Failure to follow these instructions may result in property damage, injury, or improper device operation.

  • Installation bør kun udføres af kvalificeret personale.
  • Forsøg ikke selv at modificere eller reparere enheden. Kontakt autoriseret servicepersonale.
  • Ensure the power supply meets the device's specifications.
  • Keep the device free from dust, moisture, and extreme temperatures.
  • Regularly inspect the device for any signs of damage or malfunction.

Produkt overview

The HOCHIKI BHC-4111 is an emergency alarm composite device designed for exposed installation. It integrates an alarm light, speaker, and activation button for comprehensive emergency notification.

HOCHIKI BHC-4111 Emergency Alarm Composite Device

Billedbeskrivelse: A beige rectangular device featuring a prominent red dome-shaped alarm light at the top, a black speaker grille below it, and an orange panel with a push button and text at the bottom. This image illustrates the front view of the HOCHIKI BHC-4111 unit.

Opsætning

  1. Udpakning: Carefully remove the device from its packaging. Verify all components are present (main unit).
  2. Monteringssted: Select a suitable location for exposed installation, ensuring it is easily accessible and visible in case of an emergency. Avoid areas with excessive vibration, moisture, or direct heat.
  3. Ledningsføring: Connect the device to the appropriate power source and alarm system wiring according to local electrical codes and the detailed wiring diagram provided in the full installation guide (not included in this basic manual). Professionel installation kan varmt anbefales.
  4. Indledende opstart: Once wired, apply power to the device. Observe for any indicator lights or initial self-tests.

Betjeningsvejledning

The BHC-4111 is designed for straightforward operation in emergency situations.

Aktivering af alarmen

In the event of an emergency, press the designated activation button located on the orange panel of the device. This will trigger the alarm light and sound.

Slå alarmen fra

Follow the procedures established by your facility's emergency response plan to silence the alarm. This typically involves resetting the main alarm control panel. Refer to your system's specific instructions.

Indikatorlys

The device may feature indicator lights to show its status (e.g., power, fault, alarm active). Consult the full installation guide for a detailed explanation of each indicator.

Opretholdelse

Regular maintenance ensures the reliable operation of your BHC-4111 device.

  • Rensning: Periodically clean the exterior of the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Funktionstest: Conduct periodic functional tests as recommended by local regulations and your facility's safety protocols. This typically involves activating the alarm and verifying its operation.
  • Batteriudskiftning (hvis relevant): If the device contains backup batteries, ensure they are replaced according to the manufacturer's recommendations.
  • Professionel inspektion: Schedule regular inspections and maintenance by qualified technicians to ensure compliance and optimal performance.

Fejlfinding

Dette afsnit indeholder grundlæggende fejlfindingstrin til almindelige problemer. Kontakt en kvalificeret tekniker ved komplekse problemer.

ProblemMulig årsagLøsning
Alarmen aktiveres ikkeNo power; Faulty wiring; Device malfunctionCheck power supply; Verify wiring connections; Contact service technician
Alarmen lyder konstantSystem not reset; Faulty activation buttonReset main alarm panel; Contact service technician
No light/soundPower issue; Component failureCheck power; Contact service technician

Specifikationer

  • Mærke: HOCHIKI
  • Modelnummer: BHC-4111
  • Produktdimensioner: 6 cm (dybde) x 14 cm (bredde) x 25.4 cm (højde)
  • Inkluderede komponenter: Hovedenhed
  • Fabrikant: Hochiki Corporation
  • Type: Emergency Alarm Composite Device (Exposed Type)

Garanti og support

For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact Hochiki Corporation directly.

Note: This manual provides general guidance. Always refer to the official manufacturer's documentation for complete and up-to-date information.

Relaterede dokumenter - BHC-4111

Preview Hochiki FireNET PLUS betjeningsvejledning til FN-1127 kontrolpanel og FN-LCD-S-indikatorer
Omfattende betjeningsvejledning til Hochiki FireNET PLUS FN-1127-kontrolpanelet og FN-LCD-S-indikatorerne, med detaljerede oplysninger om brand- og problemtilstande, knapfunktioner, udskiftning af sikringer, batterivedligeholdelse og SOM-R-aflastning.asing-funktionen.
Preview Dating af Hochiki brandalarmer: En guide fra Fire Trade Supplies
Lær hvordan du daterer Hochiki brandalarmer, inklusive ATJ-EN-modellen, ved hjælp af serienumre og produktionskoder. Find kontaktoplysninger for Fire Trade Supplies.
Preview Hochiki Produktguide ISS30:MAR24 - Branddetekteringssystemer og -løsninger
Omfattende produktguide fra Hochiki, der beskriver deres avancerede udvalg af branddetekteringssystemer, herunder adresserbare, konventionelle, trådløse og luftdetekteringssystemer.ampling-teknologier. Lær om Hochikis engagement i innovation inden for brandsikkerhed.
Preview HOCHIKI ACE-V analog multikriteriedetektor - Tekniske specifikationer og funktioner
Detaljeret information om HOCHIKI ACE-V analog multikriteriedetektor, herunder dens anvendelser, standardfunktioner, betjening, tekniske specifikationer og produktlister. Designet til effektiv røg- og varmedetektion.
Preview Installationsvejledning til FNV 25 / FNV 50 / FNV 100 stemmeevakueringssystem
Omfattende installationsvejledning til Hochiki FNV 25, FNV 50 og FNV 100 stemmeevakueringsgrænsefladesystemerne. Dækker systemer overview, installationsprocedurer, ledningsføringsdetaljer, terminalbetegnelser, betjening, specifikationer, kontaktindstillinger og fejlfinding.
Preview Installationsvejledning til Hochiki DCP-SOM-AI/DCP-SOM-A Klasse A overvåget udgangsmodul
Detaljeret installationsvejledning til Hochiki Americas DCP-SOM-AI og DCP-SOM-A Klasse A overvågede outputmoduler, der dækker generel beskrivelse, montering, ledningsføring, specifikationer og SCI-drift.