1. Introduktion
Thank you for choosing the ELEGANT 48x72 Double Sliding Shower Door. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new shower door. Please read all instructions carefully before beginning installation and retain this manual for future reference.

Figure 1: ELEGANT 48x72 Double Sliding Shower Door installed.
2. Sikkerhedsoplysninger
WARNING: Improper installation can lead to serious injury or product damage. Always follow these safety guidelines.
- Bær altid sikkerhedsbriller under installationen.
- Handle glass panels with extreme care. Tempered glass, while strong, can shatter if struck at the edges or corners.
- Sørg for, at installationsfladen (vægge, gulv) er strukturelt solid og i vater.
- Spænd ikke skruerne for hårdt, da dette kan beskadige komponenter eller glas.
- Hold børn og kæledyr væk fra installationsområdet.
- Hvis du er usikker på nogen del af installationen, skal du kontakte en kvalificeret fagmand.

Figure 2: Anti-crash angle designed to protect walls from scratches.
3. Pakkens indhold
Please verify that all parts are present and undamaged before beginning installation. If any parts are missing or damaged, do not proceed with installation and contact customer support.
Komponentliste:
- Hærdede glaspaneler (x2)
- Topskinne i aluminium
- Aluminum Bottom Guide Rail
- Wall Profiles (x2)
- Double Handles (x2 sets)
- Rollers/Wheels (for sliding mechanism)
- Full-length Shower Door Seal Strips
- Fastgørelses- og hardwaresæt
- Installationsvejledning (denne manual)
4. Nødvendigt værktøj
Følgende værktøjer anbefales til en vellykket installation:
- Målebånd
- Blyant
- Niveau
- Drill with appropriate drill bits (for tile/masonry and wood studs)
- Skruetrækkersæt (Phillips og flad)
- Caulking Gun and Silicone Sealant (mildew-resistant)
- Utility Kniv
- Rubber Mallet (optional, for gentle adjustments)
- Sikkerhedsbriller
5. Installationsvejledning
This section outlines the steps for installing your ELEGANT Double Sliding Shower Door. It is crucial to follow these steps precisely for proper function and safety. Installation can be done from either the left or the right side to suit your bathroom layout.
5.1. Forberedelse
- Mål og markér: Carefully measure the width of your shower opening at the top, middle, and bottom. Ensure the walls are plumb and the base is level. Mark the desired height for the top rail.
- Juster bredde: The top and bottom rail tracks can be cut to fit your specific bathroom width, allowing for an adjustment range of 44-48 inches. Measure and cut the rails precisely.

Figure 3: Illustration of the width adjustment feature for the top rail.
5.2. Rammesamling
- Installer Wall Profiles: Secure the vertical wall profiles to the shower walls using the provided fasteners. Ensure they are plumb and aligned.
- Attach Top and Bottom Rails: Connect the cut top and bottom rails to the wall profiles. The premium aluminum frame ensures a stable and safe structure.

Figure 4: Detail of the durable aluminum frame.
5.3. Glass Panel Installation
- Installer ruller: Attach the rollers to the top edge of the glass panels.
- Hang Glass Panels: Carefully lift and hang the tempered glass panels onto the top rail rollers. Guide the bottom edge of the glass into the bottom guide rail.

Figure 5: Top rail and roller system for safe and smooth operation.

Figure 6: Bottom guide rail designed to prevent water leaks.
5.4. Final Adjustments and Sealing
- Installer håndtag: Attach the double handles to the glass panels. These handles facilitate sliding and provide convenient storage space.
- Apply Seal Strips: Install the full-length shower door seal strips along the edges of the glass panels to prevent water leaks.
- Kaldning: Apply a bead of mildew-resistant silicone sealant along the exterior joints of the frame and where the frame meets the shower base and walls. Allow to cure completely before use.

Figure 7: Dual-zone handles for easy operation and towel hanging.
5.5. Installationsvideoguide
For en visuel vejledning til installationsprocessen, se venligst den officielle produktvideo nedenfor:
Video 1: Official installation guide for the ELEGANT Double Sliding Shower Door. This video demonstrates key steps and features of the shower door.
6. Betjeningsvejledning
Your ELEGANT Double Sliding Shower Door is designed for smooth and effortless operation.
- To open or close the shower door, gently grasp one of the handles and slide the glass panel along the top and bottom tracks.
- The double sliding design allows both panels to move, providing flexible entry and exit options.
- Avoid forcing the doors if they encounter resistance. Check for any obstructions in the tracks.

Figure 8: The double sliding design ensures smooth and quiet operation.
7. Vedligeholdelse og rengøring
Regelmæssig rengøring og vedligeholdelse vil sikre din brusedørs levetid og udseende.
7.1. Glasrensning
- Clean the tempered glass panels regularly with a soft cloth and a non-abrasive glass cleaner.
- Avoid using harsh chemicals, abrasive pads, or scouring powders, as these can scratch the glass or damage the finish.
- For best results, wipe down the glass after each use to prevent water spots and soap scum buildup.
7.2. Frame and Hardware Cleaning
- Wipe the brushed nickel aluminum frame and handles with a soft, damp klæde.
- For stubborn stains, use a mild, non-abrasive cleaner specifically designed for brushed nickel finishes.
- Periodically inspect the rollers and tracks for any debris or buildup and clean them to ensure smooth sliding.
- Check all screws and fasteners periodically to ensure they are secure. Do not overtighten.
8. Fejlfinding
Hvis du støder på problemer med din brusedør, kan du se følgende almindelige problemer og løsninger:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Døren glider ikke jævnt | Debris in tracks, damaged rollers, misaligned panels. | Clean tracks thoroughly. Inspect rollers for damage and replace if necessary. Check panel alignment and adjust if needed. |
| Water leaks from door edges | Damaged or improperly installed seal strips, insufficient caulking. | Ensure seal strips are correctly installed and undamaged. Reapply silicone sealant to exterior joints if necessary. |
| Døren lukker ikke helt | Obstruction in track, misaligned frame. | Remove any obstructions. Check if the frame is plumb and level; adjust if possible. |
| Glass appears cloudy or stained | Hard water spots, soap scum buildup. | Clean with a specialized glass cleaner for hard water. Regular cleaning after each use helps prevent this. |
If the problem persists after attempting these solutions, please contact ELEGANT customer support.
9. Specifikationer
- Model: 48x72 Double Sliding Shower Door
- Dimensioner: 48" W x 72" H (Width adjustable from 44" to 48")
- Glastykkelse: 1/4'' (6 mm) ANSI-certified Tempered Glass
- Rammemateriale: Aluminium
- Slutte: Børstet nikkel
- Dørtype: Double Sliding
- Håndtag: Dual-Zone Towel Bar Handles
- Forsamling: Reversible (Left or Right opening)
- Varens vægt: Cirka 89 lbs
10. Garantioplysninger
ELEGANT products are manufactured to high-quality standards and are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official ELEGANT webwebsted. Gem venligst din købsbevis til garantikrav.
11. Kundesupport
If you have any questions, require assistance with installation, or need to report a missing/damaged part, please contact ELEGANT customer support:
- Webwebsted: Visit the ELEGANT Store on Amazon
- E-mail: Refer to your product packaging or warranty card for direct contact information.
- Telefon: Refer to your product packaging or warranty card for direct contact information.
Our customer service team is available to assist you.





