1. Opsætningsvejledning
1.1 Udpakning og første inspektion
Carefully remove all components from the packaging. Inspect the bicycle and all accessories for any signs of damage during transit. If any damage is found or parts are missing, please contact customer support immediately.
Forventede komponenter omfatter:
- HillMiles Mile 1 Electric Bicycle Frame
- 36V 10.4AH batteripakke
- Batterioplader
- Pedaler (venstre og højre)
- Tool Kit (wrenches, hex keys)
- Brugervejledning (dette dokument)
1.2 Montering
Follow these steps to assemble your HillMiles Mile 1 electric bicycle:
- Montering af styr: Loosen the stem bolts on the front fork. Insert the handlebar stem into the fork tube, ensuring it is aligned with the front wheel. Tighten the stem bolts securely.
- Montering af sadelpind: Insert the seat post into the seat tube of the frame. Adjust the height to a comfortable riding position, then secure it with the quick-release lever or bolt.
- Pedalfastgørelse: Identify the Left (L) and Right (R) pedals. The left pedal screws counter-clockwise, and the right pedal screws clockwise. Apply a small amount of grease to the threads and screw them firmly into the crank arms.
Detailed image of handlebar installation, showing the stem being inserted and aligned.
Detailed image of pedal attachment, highlighting the L/R markings and tightening direction.
1.3 Batteriinstallation og første opladning
Before your first ride, fully charge the battery. Slide the 36V 10.4AH battery into its designated slot on the frame until it clicks securely into place. Use the provided key to lock the battery if applicable.
Image illustrating the correct method for installing the battery into the bike frame.
Connect the charger to the battery charging port and then to a standard wall outlet. The indicator light on the charger will show charging status (e.g., red for charging, green for fully charged). The initial charge may take 6-8 hours.
Image demonstrating how to properly connect the battery charger to the bicycle's charging port.
2. Operating Your HillMiles Mile 1
2.1 Tænd/sluk
To power on the bicycle, ensure the battery is installed and locked. Press and hold the power button on the display unit (usually located on the handlebars) for a few seconds until the screen illuminates. To power off, press and hold the same button until the display turns off.
2.2 Displayfunktioner
LCD-displayet giver vigtige køreoplysninger:
- Hastighed: Current riding speed (km/h).
- Batteriniveau: Angiver resterende batteriopladning.
- Pedalhjælpsniveau (PAS): Shows the current level of motor assistance (0-5).
- Odometer/Trip Distance: Displays total distance traveled or current trip distance.
- Forlygteindikator: Viser om forlygten er tændt.
Use the '+' and '-' buttons on the display to navigate through different information screens or adjust settings.
2.3 Pedal Assist System (PAS)
The HillMiles Mile 1 features a Pedal Assist System (PAS) with multiple levels. When you pedal, the motor provides assistance based on the selected level. Use the '+' button to increase assistance and '-' to decrease it. Level 0 provides no assistance, while higher levels provide more power, making pedaling easier.
2.4 Bremsning
The bicycle is equipped with front and rear brakes. The right lever typically controls the rear brake, and the left lever controls the front brake. Apply both brakes simultaneously for effective and safe stopping. Avoid sudden, hard braking, especially with the front brake, to prevent skidding.
2.5 Sikker kørsel
Always prioritize safety when riding your electric bicycle:
- Brug altid en hjelm, der opfylder sikkerhedsstandarderne.
- Sæt dig bekendt med lokale færdselslove og -regler for elcykler.
- Perform a pre-ride check before each use: inspect tires, brakes, and ensure all bolts are tight.
- Vær opmærksom på dine omgivelser og foregribe potentielle farer.
- Adjust your riding style to weather conditions and road surfaces.
- Use the integrated lights for visibility, especially during low-light conditions.
This video demonstrates essential safety tips for riding the HillMiles Mile 1 electric bicycle, including helmet use, hand signals, and pre-ride checks.
3. Vedligeholdelse og pleje
3.1 Regelmæssig kontrol
To ensure the longevity and safe operation of your HillMiles Mile 1, perform these checks regularly:
- Dæk: Check tire pressure before each ride. The 14'*2.0' tires typically require 30-50 PSI. Inspect for wear or punctures.
- Bremser: Test brake levers for proper function and ensure brake pads are not excessively worn.
- Kæde: Keep the chain clean and lubricated to prevent rust and ensure smooth pedaling.
- Bolte og fastgørelseselementer: Periodically check that all bolts, especially on the handlebars, seat post, and wheels, are securely tightened.
Image demonstrating how to check and maintain proper tire pressure.
3.2 Rengøring
Rengør din elcykel med reklameamp cloth and mild soap. Avoid using high-pressure washers or directing water directly at electrical components (motor, battery, display) as the IP65 rating protects against splashes, not direct jets.
3.3 Pleje af batterier
To maximize the lifespan of your 36V 10.4AH battery:
- Undgå at aflade batteriet helt før genopladning.
- Charge the battery regularly, even if the bike is not used frequently.
- Store the battery in a cool, dry place, ideally between 10°C and 20°C (50°F and 68°F).
- Hvis batteriet opbevares i længere perioder, skal det oplades til ca. 50-70% hver 1-2 måned.
4. Fejlfinding af almindelige problemer
This section provides solutions for common problems you might encounter. For issues not listed here, please contact customer support.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Bike won't power on | Battery not installed correctly, battery discharged, power button not pressed long enough. | Ensure battery is fully seated and locked. Charge the battery. Press and hold the power button for 3-5 seconds. |
| Motoren hjælper ikke | PAS level is 0, battery low, brake levers engaged, loose motor cable. | Increase PAS level. Charge battery. Release brake levers. Check motor cable connection. |
| Brakes squeak | Dirty brake pads/rotors, misaligned calipers, worn pads. | Clean brake pads and rotors. Adjust caliper alignment. Replace worn brake pads. |
| Batteriet oplades ikke | Charger not connected properly, faulty charger/battery, power outlet issue. | Ensure secure connections. Try a different outlet. Contact support if issue persists. |
5. Tekniske specifikationer
- Model: HillMiles Mile 1
- Motor: 250W børsteløs navmotor
- Batteri: 36V 10.4AH litium-ion
- Max hastighed: 25 km/t (15.5 mph)
- Rækkevidde: 40-65 km (25-40 miles) per charge (depending on terrain, rider weight, and assist level)
- Dæk: 14" x 2.0" Pneumatic
- Rammemateriale: Aluminiumslegering
- Vandtæthed: IP65 (Protected from dust and low-pressure water jets from any direction)
- Bremser: Front og bageste skivebremser
- Vægt: Ca. 18 kg (39.7 lbs)
Note: Specifications are subject to change without notice. Actual performance may vary based on usage conditions.
6. Garantioplysninger
HillMiles provides a limited warranty for the Mile 1 Electric Bicycle against defects in materials and workmanship under normal use. The warranty period typically covers:
- Ramme: 1 år
- Batteri: 6 måneder
- Motor og styring: 1 år
- Andre komponenter: 6 måneder
This warranty does not cover normal wear and tear, damage caused by misuse, neglect, accidents, unauthorized modifications, or improper maintenance. Proof of purchase is required for all warranty claims.
For full warranty terms and conditions, please refer to the official HillMiles webwebsted eller kontakt kundesupport.
7. Kundesupport
If you have any questions, require technical assistance, or need to make a warranty claim, please contact our customer support team:
- Webwebsted: www.hillmiles.com/support
- E-mail: support@hillmiles.com
- Telefon: +1-800-XXX-XXXX (Available Monday-Friday, 9 AM - 5 PM EST)
Hav venligst din produktmodel og købsdato klar, når du kontakter support.
