ANYSECU W2 Pro 4G LTE Car Radio User Manual

1. Introduktion

This manual provides detailed instructions for the installation, operation, and maintenance of your ANYSECU W2 Pro 4G LTE Car Radio. This device combines advanced communication features with the versatility of the Android 11 operating system, offering GPS navigation, Bluetooth, and Wi-Fi connectivity. Please read this manual thoroughly before using the product to ensure proper function and safety.

Image 1.1: The ANYSECU W2 Pro 4G LTE Car Radio with its attached microphone. This image displays the front view of the radio unit, highlighting the screen, control buttons, and the connected hand microphone.

2. Pakkens indhold

Bekræft, at alle nedenstående varer er til stede i din produktpakke:

• Radio krop
• Antenne
• Batteri
• Strømkabel
• Adapter
• Klip
• Brugervejledning (dette dokument)

Billede 2.1: En overview of the standard package contents for the ANYSECU W2 Pro. This image shows the main radio unit, bracket, microphone, 4G antenna, microphone holder, GPS antenna, and power cable.

3. Opsætning

3.1. Fysisk installation og ledningsføring

Proper installation is crucial for optimal performance. Ensure the device is securely mounted in your vehicle and connected to the power source correctly.

1. Montering: Use the provided bracket to securely mount the radio body in a suitable location within your vehicle, ensuring it does not obstruct your view eller forstyrre kørselsstyringen.
2. Antenneforbindelse: Connect the included 4G antenna to the designated port on the radio.
3. GPS Antenna Connection: Connect the GPS antenna to its dedicated port and place it in a location with a clear view af himlen for den bedste signalmodtagelse.
4. Strømtilslutning: Connect the power cable according to the wiring schematics below.

Image 3.1: Wiring schematics for the ANYSECU W2 Pro. The red wire is for positive power, the black wire is for negative/ground, and the blue wire is for ACC (Accessory) power, typically connected to the vehicle's ignition switch.

3.2. Første opstart

After completing the physical installation and wiring:

1. Sørg for, at alle forbindelser er sikre.
2. Press and hold the power button on the radio body until the screen illuminates.
3. The device will boot into the Android 11 operating system. Follow any on-screen prompts for initial setup.

3.3. Netværksforbindelse

The W2 Pro supports 4G LTE, Wi-Fi, and Bluetooth connectivity.

• 4G LTE: Insert a compatible SIM card (not included) into the designated slot. Configure APN settings if required by your carrier.
• Wi-Fi: Navigate to Settings > Network & internet > Wi-Fi to connect to available Wi-Fi networks.
• Bluetooth: Navigate to Settings > Connected devices > Bluetooth to pair with Bluetooth accessories such as headsets or external speakers.

3.4. GPS-opsætning

The built-in GPS module provides accurate positioning. Ensure the GPS antenna is properly connected and has an unobstructed view of the sky. The device will automatically acquire GPS signals. You can use pre-installed navigation apps or download others from the Google Play Store.

Image 3.2: The ANYSECU W2 Pro displaying a real-time location map on its screen, illustrating its GPS positioning capabilities. This image highlights the device's navigation function within an urban setting.

4. Betjeningsvejledning

4.1. Touch Screen and Basic Navigation

The W2 Pro features a 3.5-inch touch screen for intuitive operation.

• Tryk på: Vælg et element, eller åbn et program.
• Stryg: Naviger gennem menuer eller rul gennem indhold.
• Knib-for-at-zoome: Adjust map views or image sizes.

Image 4.1: The 3.5-inch touch screen of the ANYSECU W2 Pro displaying various Android applications. This image demonstrates the visual clarity and interactive nature of the screen for accessing device functions.

4.2. Android 11-system

The device runs on Android 11, providing access to a wide range of applications via the Google Play Store. Navigate the interface similar to any Android smartphone or tablet.

4.3. Communication (Zello & Real PTT)

The W2 Pro is compatible with Zello PTT and Real PTT platforms for push-to-talk communication over 4G LTE or Wi-Fi networks.

1. Installer apps: Download and install Zello or Real PTT from the Google Play Store.
2. Kontoopsætning: Create or log in to your account within the respective application.
3. PTT Function: Use the dedicated PTT button on the microphone to initiate and end transmissions.
4. Talk Modes: The device supports single call, group call, and all call modes, configurable within the PTT applications.

4.4. SOS Features

The device is equipped with dedicated SOS buttons for emergency situations. Configure emergency contacts and settings within the device's system or a dedicated emergency application (if available).

5. Vedligeholdelse

• Rensning: Brug en blød, tør klud til at rengøre enheden. Undgå slibende rengøringsmidler eller opløsningsmidler.
• Miljøforhold: Operate the device within specified temperature and humidity ranges. Avoid exposure to extreme heat, cold, or moisture.
• Softwareopdateringer: Periodically check for system updates via the Android settings to ensure optimal performance and security.

6. Fejlfinding

7. Specifikationer

8. Garanti og support

8.1. Garantioplysninger

The ANYSECU W2 Pro radio body is covered by a 1-year warranty from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.

8.2. Kundesupport

For technical assistance, warranty claims, or further inquiries, please contact ANYSECU customer support through the official website or your point of purchase. Please have your model number (W2Pro-US-11) and purchase details ready when contacting support.