Kmivo M084-2P

Kmivo M084-2P Rechargeable LED Flashlight User Manual

Model: M084-2P

1. Introduktion

Thank you for choosing the Kmivo M084-2P Rechargeable LED Flashlight. This manual provides essential information for the safe and effective use of your new flashlight. Please read it thoroughly before operation and retain it for future reference.

2. Sikkerhedsoplysninger

3. Pakkens indhold

Bekræft at alle varer er til stede i din pakke:

4. Produktet er slutview

Familiarize yourself with the components of your Kmivo M084-2P flashlight:

Diagram of Kmivo M084-2P flashlight components
Figure 1: Key components of the Kmivo M084-2P Flashlight, including the LED chip, power switch, indicator light, non-slip handle, adjustable design, and safety hammer.

5. Opsætning

5.1 Indledende opladning

Before first use, fully charge your flashlight. The built-in 5000mAh battery provides extended usage time.

  1. Locate the rubber flap covering the USB-C charging port on the side of the flashlight.
  2. Gently lift the flap to expose the port.
  3. Connect the provided USB-C cable to the flashlight and the other end to a compatible USB power source (e.g., wall adapter, computer USB port).
  4. The indicator light will illuminate red during charging and turn blue when fully charged.
  5. Opladning tager typisk cirka 3-5 timer for en fuld opladning.
  6. Når opladningen er færdig, skal du frakoble kablet og lukke gummiklappen forsvarligt for at opretholde vandtætheden.
Kmivo M084-2P flashlight connected to a USB charger
Figure 2: The flashlight being charged via its USB-C port, with the charging indicator visible.

6. Betjeningsvejledning

6.1 Tænd/sluk og valg af tilstand

The flashlight features 5 lighting modes: High, Medium, Low, Strobe, and SOS.

  1. At tænde: Press the power switch once. The flashlight will activate in High mode.
  2. Sådan skifter du tilstande: While the flashlight is on, press the power switch repeatedly to cycle through High → Medium → Low → Strobe → SOS.
  3. At slukke: From any mode, if the flashlight has been on for more than 10 seconds, press the power switch once to turn it off. If less than 10 seconds, cycle through modes until it turns off, or press and hold the power switch for 2-3 seconds.
Images demonstrating the 5 lighting modes of the Kmivo M084-2P flashlight
Figure 3: Visual representation of the flashlight's five modes: High, Medium, Low, Strobe, and SOS, showing varying light intensities and patterns.

6.2 Justerbar fokus (zoomfunktion)

The flashlight's head can be adjusted to change the beam from a wide floodlight to a narrow spotlight.

Images showing the adjustable focus feature of the Kmivo M084-2P flashlight, from wide beam to narrow beam
Figure 4: The adjustable focus mechanism, illustrating how to switch between a wide floodlight and a narrow, long-range spotlight.

6.3 Demonstrating Brightness

The Kmivo M084-2P flashlight delivers up to 99,000 lumens, providing powerful illumination for various environments.

Person standing in a dark forest illuminated by the super bright Kmivo M084-2P flashlight
Figure 5: A person in a dark, wooded area demonstrating the wide and powerful beam of the flashlight, illuminating a significant portion of the surroundings.

Video 1: A short demonstration of the Kmivo rechargeable LED flashlight's brightness and beam spread in a dark outdoor setting.

7. Charging and Battery Indicator

The flashlight is equipped with a smart charging port and a battery indicator for convenience.

Image showing the Kmivo M084-2P flashlight with an overlay indicating 15 hours of running time
Figure 6: The flashlight highlighting its long-lasting runtime of up to 15 hours on a single charge.

8. Vedligeholdelse

8.1 Rengøring

To maintain optimal performance, keep your flashlight clean.

8.2 Vandtæthed

The Kmivo M084-2P flashlight is IPX7 waterproof, meaning it can withstand immersion in water up to 1 meter for 30 minutes. It is suitable for use in heavy rain, snow, and other harsh weather conditions.

Kmivo M084-2P flashlight being splashed with water, demonstrating its IPX7 waterproof rating
Figure 7: The flashlight being exposed to water, illustrating its IPX7 waterproof design for outdoor use.

Video 2: A demonstration of the flashlight's water resistance and overall durability.

8.3 Opbevaring

Store the flashlight in a cool, dry place when not in use. For long-term storage, ensure the battery is partially charged (around 50%) to prolong its lifespan.

9. Fejlfinding

ProblemMulig årsagLøsning
Lommelygten tænder ikke.Lavt batteri.Oplad lommelygten helt.
Lommelygten tænder ikke.Fejl på strømafbryderen.Kontakt kundesupport.
Lyset er svagt eller flimrer.Lavt batteri.Oplad lommelygten helt.
Ladeindikatoren virker ikke.Defekt kabel eller strømkilde.Prøv et andet USB-kabel eller strømadapter.
Ladeindikatoren virker ikke.Problem med opladningsporten.Ensure the charging port is clean and free of debris. Contact customer support if the issue persists.

10. Specifikationer

FeatureDetalje
ModelnummerM084-2P
LyskildetypeLED (P084-2 chip)
LysstyrkeOp til 99,000 Lumens
BelysningstilstandeHøj, Mellem, Lav, Strobe, SOS (5 tilstande)
BatteritypeIndbygget 5000mAh genopladeligt batteri
OpladningsportUSB-C
OpladningstidCa. 3-5 timer
RuntimeOp til 15 timer (på lavere indstillinger)
VandmodstandIPX7 (vandtæt)
MaterialeAluminium
Produktdimensioner1.3" D x 1.6" B x 6.5" H
Varens vægt1.17 pund
Særlige funktionerRechargeable, High Power, Adjustable Light Modes, Adjustable Focus, Durable, Impact Resistant, Long Range, Portable

11. Garanti og support

Kmivo provides an extended warranty for this product. For any issues such as malfunction, lost accessories, or damaged packages, please contact Kmivo customer service directly through Amazon. Our team of engineers is available 24/7 to provide professional assistance.

For yderligere support, besøg venligst Kmivo Store on Amazon.

Relaterede dokumenter - M084-2P

Preview VEVOR F-CLAMP Instruction Manual and Technical Specifications
Comprehensive guide for VEVOR F-CLAMPS, including model details, assembly instructions, safety precautions, troubleshooting, maintenance, and warranty information.
Preview Sol-Ark frekvensfaldsapplikationsnote: Programmeringsvejledning
Learn how to configure the Frequency-Droop function on Sol-Ark residential solar inverters. This application note provides step-by-step instructions for setting frequency limits, deadbands, and response times to ensure grid compliance and optimal power control.
Preview Beverage-Air BF Series Installation and Operating Instructions
Comprehensive guide for the installation, operation, and maintenance of Beverage-Air BF series refrigeration units. Covers safety, product information, electrical requirements, and troubleshooting.
Preview Installationsmanual til Trane-kassetteventilatorenhed | CWS-serien
Denne installationsmanual fra Trane Technologies giver omfattende vejledning til sikker og korrekt installation af Trane kassetteventilatorer (CWS-serien). Den dækker vigtige sikkerhedsregler, tekniske specifikationer, mekaniske, hydrauliske og elektriske forbindelser, driftsbegrænsninger, vedligeholdelse og fejlfinding for forskellige modeller.
Preview Installationsvejledning til Lennox MLB/MPC udendørsenheder med M22A/M33C indendørsenheder
Omfattende installationsvejledning til Lennox enkeltzone mini-split-systemer, der dækker MLB/MPC udendørsenheder og M22A/M33C indendørs kassettenheder. Indeholder modelidentifikation, systemkomponenter, dimensioner, afstande, installationsprocedurer, ledningsføring og fejlfinding.
Preview Návod k obsluze TEKA TZC 32320, VT TC 2P.1, VM 30 2P - Varný panel
Komplet nívod k obsluze pro varné panely TEKA model TZC 32320, VT TC 2P.1 og VM 30 2P. Installer, ovládání, čištění og údržbě vašeho nového spotřebiče.