1. Introduktion
Thank you for choosing the Philips Lightolier Indoor Surface Flush Mount Downlight LED. This product is designed for indoor illumination, offering selectable lumen output and color temperature (CCT) to suit various lighting needs. This manual provides essential information for safe installation, operation, and maintenance of your new LED downlight fixture.
Image 1.1: Four Philips Lightolier 5-inch round LED surface mount downlights, as supplied in a case of four units.
2. Sikkerhedsoplysninger
Please read all instructions carefully before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause personal injury or property damage.
- ADVARSEL: Risiko for elektrisk stød. Afbryd strømmen til sikringen eller strømafbryderen før installation eller servicering.
- Dette produkt skal installeres i overensstemmelse med den gældende installationskode af en person, der er bekendt med produktets konstruktion og drift og de involverede farer.
- Sørg for, at alle elektriske forbindelser er foretaget korrekt og sikkert.
- Undlad at ændre eller modificere armaturet.
- Kun egnet til indendørs brug.
- Operation voltage: 120/277V.
3. Pakkens indhold
Hver pakke indeholder følgende komponenter:
- 4 x Philips Lightolier Indoor Surface Flush Mount Downlight LED Fixtures
- Installationshardware (skruer, trådmøtrikker)
4. Opsætning og installation
Follow these steps for proper installation of your LED downlight fixture:
- Sluk for strømmen: Before beginning installation, ensure the power supply to the installation location is turned off at the circuit breaker or fuse box.
- Forbered monteringsoverfladen: The fixture is designed for surface mounting. Ensure the mounting surface is clean, dry, and structurally sound.
- Select Lumen and CCT: Before final installation, locate the lumen and CCT (Color Correlated Temperature) selection switches on the back or side of the fixture. Adjust these switches to your desired brightness (11W or 9W) and color temperature (2700K, 3000K, 3500K, 4000K, or 5000K).
Image 4.1: Visual representation of the Lumen and CCT selection switches.
- Ledningsforbindelser: Connect the fixture's wires to the building's electrical wires according to local electrical codes. Typically, this involves connecting the black wire (live) to black, white wire (neutral) to white, and green/bare copper wire (ground) to ground. Use appropriate wire nuts to secure connections.
- Monter armaturet: Secure the fixture to the mounting surface using the provided screws. Ensure the fixture is flush and stable.
Image 4.2: Dimensional diagram showing the 5-inch diameter and 1 5/8-inch height of the surface mount downlight.
- Gendan strøm: Når installationen er færdig, og alle forbindelser er sikre, skal strømmen genoprettes ved afbryderen.
5. Betjeningsvejledning
The Philips Lightolier LED downlight is designed for simple operation once installed.
- Tænd/sluk: Styr lyset ved hjælp af en standard vægafbryder, der er tilsluttet armaturets kredsløb.
- Lumen and CCT Selection: As detailed in the setup section, the lumen (brightness) and CCT (color temperature) are selected via switches on the fixture prior to final installation. These settings are not adjustable during normal operation without accessing the fixture.
- Dæmpning: This fixture is dimmable. For optimal performance, use a compatible LED dimmer switch. Refer to the dimmer manufacturer's instructions for proper installation and operation.
6. Vedligeholdelse
The Philips Lightolier LED downlight requires minimal maintenance.
- Rensning: Sørg for, at strømmen er slukket for at rengøre armaturet. Brug en blød, tør eller let fugtet klud.amp klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler, da de kan beskadige overfladen eller de elektriske komponenter.
- Ingen dele, der kan serviceres af brugeren: There are no user-serviceable parts inside this fixture. Do not attempt to open or repair the unit.
7. Fejlfinding
Hvis du oplever problemer med din LED-downlight, kan du se følgende almindelige problemer og løsninger:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tændes ikke. | Ingen strøm til armaturet. Løs ledningsforbindelse. Defekt kontakt. | Tjek afbryder/sikring. Kontroller, at alle ledningsforbindelser er sikre (med strømmen slukket). Test vægkontakten. |
| Lyset flimrer eller dæmpes ujævnt. | Inkompatibel lysdæmper. Løs ledningsforbindelse. | Sørg for at bruge en kompatibel LED-dæmper. Kontroller ledningsforbindelserne (med strømmen slukket). |
| Forkert farvetemperatur eller lysstyrke. | Lumen/CCT selection switches set incorrectly. | Turn off power, remove fixture, and adjust the lumen/CCT switches to desired settings. Reinstall. |
If the problem persists after attempting these solutions, contact a qualified electrician or customer support.
8. Specifikationer
| Feature | Detalje |
|---|---|
| Produkttype | Indoor Surface Flush Mount Downlight LED |
| Modelnummer | SD5RSLMZ10SCTUW |
| Mærke | Signify (Philips Lightolier) |
| Opstillingsform | Ceiling, Round |
| Diameter | 5 tommer (128 mm) |
| Højde | 1 5/8 tommer (43 mm) |
| Wattage (Valgbar) | 11 watt eller 9 watt |
| Lumen Output (Selectable) | 700 lumens (11W) or 540 lumens (9W) |
| Color Temperature (CCT Selectable) | 2700K, 3000K, 3500K, 4000K, 5000K |
| Voltage | 120/277V |
| Dæmpbar | Ja |
| Materiale | Lightweight material (e.g., plastic/metal composite) |
| Farve | Hvid |
| Strømkilde | Direkte ledning |
| Indendørs/Udendørs brug | Indendørs |
| Varens vægt | 1 pound (per unit, approximate) |
| Inkluderede komponenter | LED lys |
9. Garanti og support
This Philips Lightolier product is manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty documentation provided with your purchase or visit the official Signify (Philips Lightolier) webwebsted.
For technical support, troubleshooting assistance beyond what is covered in this manual, or to inquire about replacement parts, please contact Signify customer service. Contact information can typically be found on the product packaging or the manufacturer's official webwebsted.
