GLEDOPTO ZigBee 3.0 RGBCCT LED Strip Controller Pro (Model GL-C-008P(MIX)) Brugermanual

1. Introduktion

This manual provides detailed instructions for the GLEDOPTO ZigBee 3.0 RGBCCT LED Strip Controller Pro, Model GL-C-008P(MIX). This device allows for smart control of RGB, warm white, and cold white LED strips, offering extensive color and brightness adjustments through a compatible ZigBee hub.

Vigtig bemærkning: Tuya Zigbee hubs currently block third-party devices. GLEDOPTO ZigBee products are not compatible with Tuya hubs at this time. Please consider this before purchase if you intend to use a Tuya hub.

2. Produktfunktioner

• ZigBee 3.0-protokol: Utilizes advanced ZigBee 3.0 for fast, stable, and energy-efficient wireless communication.
• RGBCCT Mixing: Combines RGB color and tunable white light (2700K-6500K) for a wide range of lighting possibilities.
• Bred kompatibilitet: Works with Hub Bridge, Homey, Alexa, SmartThings, and other standard ZigBee hubs.
• Voice & App Control: Supports voice commands (e.g., Amazon Alexa) and smartphone app control for convenient adjustments.
• Holdbart design: Constructed from flame-retardant PC material.
• Bred Voltage Support: Compatible with 12V, 24V, 36V, 48V, and 54V analog LED strips.

3. Produktet er slutview og specifikationer

Billede 3.1: Front view of the GLEDOPTO ZigBee 3.0 RGBCCT LED Strip Controller Pro. This image displays the input and output terminals, model number (GL-C-008P(MIX)), input voltage range (DC12-24-36-48-54V), output current per channel (5A Max), total output current (10A Max), operating temperature (-20 to +60°C), and common anode/constant voltage type. It also shows the wire preparation guide and reset button location.

3.1. Tekniske specifikationer

Billede 3.2: Detailed product parameters for the GLEDOPTO ZigBee 3.0 RGBCCT LED Controller Pro. This image lists the product name, model number (GL-C-008P(MIX)), input voltage (DC12-24-36-48-54V), size (89x23.5x48mm), net weight (54.8g), operating temperature (-20°C to 60°C), output current (5A Max), total output current (10A Max), protection rate (IP20), and gross weight (67.2g).

4. Opsætning og installation

4.1. Wiring the LED Strip Controller

Ensure all power is disconnected before proceeding with wiring. The controller uses a press-type design for secure wire connections.

Billede 4.1: Illustration of the press-type wiring design. To connect wires, press down on the orange tab with a small screwdriver or similar tool, insert the stripped wire (9-10mm length, 0.33-2.08mm² cross-section), and release the tab to secure the connection.

1. Forbered ledninger: Strip approximately 9-10mm of insulation from the ends of your LED strip wires and power supply wires. The recommended wire cross-section is 0.33-2.08mm².
2. Connect LED Strip: Connect the R, G, B, C, W, and V+ wires from your RGBCCT LED strip to the corresponding output terminals on the controller. Ensure correct polarity for V+.
3. Tilslut strømforsyning: Connect the positive (V+) and negative (V-) wires from your DC power supply to the INPUT terminals on the controller. Observe correct polarity.

4.2. Valg af strømforsyning

The controller supports a wide range of input voltages. Select an appropriate power supply that matches the voltage requirements of your LED strip.

Billede 4.2: Voltage compatibility chart for the GLEDOPTO LED controller. It shows that for 12V and 24V LED strips, the total maximum current is 10A. For 36V, it's 7.5A; for 48V, 5.6A; and for 54V, 5A. Always match the power supply voltage to the LED strip voltage.

• For a 12V LED strip, use a 12V power supply.
• For a 24V LED strip, use a 24V power supply.
• Ensure the power supply's total current output meets or exceeds the total current draw of your LED strip, considering the controller's 10A maximum total output.

4.3. Pairing with a ZigBee Hub

After wiring and powering on the controller, it needs to be paired with a compatible ZigBee hub.

1. Tænd: Connect the power supply to the controller and LED strip. The LED strip should briefly light up.
2. Initiate Pairing on Hub: Open your ZigBee hub's application (e.g., SmartThings, Homey, Philips Hue) and initiate the device discovery or pairing mode.
3. Reset Controller (if needed): If the controller does not automatically appear, press and hold the "Reset" button on the controller for approximately 5 seconds until the connected LED strip flashes, indicating it has entered pairing mode.
4. Bekræft parring: Once discovered by your hub, follow the on-screen instructions in the hub's app to complete the pairing process.

5. Betjeningsvejledning

5.1. App Control (Color and White Light Mixing)

Once paired with your ZigBee hub, you can control the LED strip using the hub's smartphone application.

Billede 5.1: Demonstration of RGB+White Light Mix control via a smartphone app. When the color selector is moved towards the edge of the color wheel, only the RGB light turns on. When moved towards the center, both RGB and white light turn on together, allowing for richer, mixed colors.

• Farvevalg: Use the color wheel in your app to select from millions of colors.
• Justering af hvidt lys: Adjust the color temperature of the white light from warm white (2700K) to cold white (6500K).
• Lysstyrkekontrol: Dim or brighten the LED strip to your desired level.
• RGB + CCT Mixing: The controller allows for seamless mixing of RGB colors with tunable white light. Moving the color selector towards the center of the color wheel typically activates both RGB and white LEDs for a broader spectrum of hues and improved color rendering.

Billede 5.2: En eksample of a room illuminated with 16 million colors controlled by the smartphone app. The image highlights the extensive color customization available, allowing users to create various ambiances.

5.2. Voice Control (e.g., Amazon Alexa)

If your ZigBee hub is integrated with a voice assistant like Amazon Alexa, you can control your LED strip using voice commands.

Billede 5.3: Illustration of voice control functionality with Amazon Echo Plus. Examples of commands include "Alexa, turn on the bedroom light," "Alexa, set to warm white," and "Alexa, increase to 70%."

• Ensure your ZigBee hub is linked to your Amazon Alexa account.
• Brug kommandoer som:
  • "Alexa, tænd [Lysnavn]."
  • "Alexa, turn off [Light Name]."
  • "Alexa, set [Light Name] to [Color]."
  • "Alexa, indstil [Lysnavn] til varm hvid."
  • "Alexa, dim [Light Name] to 50%."
  • "Alexa, brighten [Light Name]."

6. Kompatibilitet

The GLEDOPTO ZigBee 3.0 RGBCCT LED Strip Controller Pro is designed for broad compatibility with various ZigBee 3.0 gateways.

Billede 6.1: Compatibility chart for ZigBee 3.0 gateways. It indicates compatibility with Homey, Conbee, SmartThings, Philips Hue, and Amazon Echo Plus for RGB, CCT, Brightness, and Mix functionalities. Note the specific warning regarding Tuya hubs.

Compatible Gateways:

• Hjemligt
• Conbee
• SmartThings
• Philips Hue
• Amazon Echo Plus / Studio
• Other standard ZigBee 3.0 hubs

Important Compatibility Alert: As of the latest information, Tuya Zigbee hubs have implemented restrictions that prevent third-party devices, including GLEDOPTO products, from connecting. If you use a Tuya hub, this controller will not be compatible.

7. Vedligeholdelse

The GLEDOPTO LED Strip Controller Pro requires minimal maintenance.

• Rensning: Tør forsigtigt controlleren af ​​med en tør, blød klud. Brug ikke flydende rengøringsmidler eller opløsningsmidler.
• Miljø: Ensure the controller is installed in a dry environment, away from direct sunlight, extreme temperatures, and high humidity. The IP20 rating indicates it is not protected against water.
• Firmwareopdateringer: Periodically check your ZigBee hub's application for any available firmware updates for connected devices, including the GLEDOPTO controller.

8. Fejlfinding

9. Sikkerhedsoplysninger

• Afbryd altid strømmen før installation eller vedligeholdelse.
• This device is for indoor use only (IP20 rating). Do not expose to water or high humidity.
• Sørg for, at strømforsyningen voltage matches the LED strip voltage and is within the controller's specified input range.
• Do not exceed the maximum total output current of 10A.
• Opbevares utilgængeligt for børn.
• Do not attempt to disassemble or modify the controller. This will void any warranty.

10. Garanti og support

GLEDOPTO products typically come with a standard manufacturer's warranty. Please refer to the product packaging or the official GLEDOPTO webwebstedet for specifikke garantivilkår.

For technical support, troubleshooting assistance, or warranty claims, please contact GLEDOPTO customer service through their official channels or the retailer from whom you purchased the product.

Online ressourcer: For additional information, FAQs, and community support, visit the official GLEDOPTO website or relevant smart home forums.