Thermaltake Tower 250 mITX Mini Tower PC Case User Manual

1. Introduktion

The Thermaltake Tower 250 mITX Mini Tower is designed to accommodate compact mITX builds while retaining the distinctive octagonal design of the Tower series. This chassis offers robust support for high-performance components within a small footprint, measuring approximately 19.9 inches (506mm) tall, 11.8 inches (300mm) wide, and 11.5 inches (281mm) deep. It supports GPUs up to 360mm in length and radiators up to 360mm. The case comes equipped with two 120mm CT fans pre-installed at the top for exhaust.

Figure 1: Fully assembled Thermaltake Tower 250 PC Case with internal components.

2. Opsætning og installation

This section provides detailed instructions for assembling your PC components within the Thermaltake Tower 250 chassis.

2.1. Panelfjernelse

The Tower 250 features tool-free panel removal for easy access. The tempered glass panels on the front and two perforated panels on each side utilize magnets and push clips. Gently pull or unclip to remove them.

Figur 2: Side view of the Thermaltake Tower 250 with a side panel removed, showing internal structure.

2.2. Installation af bundkort

1. Ensure all necessary standoffs are correctly installed for your mITX motherboard.
2. Carefully align your mITX motherboard with the standoffs and I/O shield opening.
3. Fastgør bundkortet med de medfølgende skruer.

2.3. Installation af strømforsyningsenhed (PSU)

The Tower 250 supports both SFX and ATX form factor PSUs. An SFX bracket is preinstalled. For ATX PSUs, ensure it fits within the specified dimensions.

1. Mount the PSU to the designated bracket.
2. Slide the PSU and bracket assembly into the chassis.
3. Secure the PSU with screws from the rear of the chassis.

2.4. Graphics Processing Unit (GPU) Installation

The chassis supports GPUs up to 360mm in length (with the power cover removed). The vertical mounting orientation is a key feature.

1. Install the PCI-e riser cable into the motherboard's PCI-e slot.
2. Secure the riser cable to the chassis.
3. Carefully insert the GPU into the riser cable's slot.
4. Secure the GPU to the chassis using the provided screws or retention mechanism.

2.5. Installation af lagerenhed

The Tower 250 offers flexible storage options.

• 2.5" SSD'er: Mount up to two 2.5" SSDs on the designated brackets, typically located behind the motherboard tray or in other accessible areas.
• 3.5" harddiske: The chassis can accommodate one 3.5" HDD, often sharing mounting points with 2.5" drives. Refer to the chassis diagram for specific locations.

2.6. Installation af kølesystem

The Tower 250 comes with two 120mm CT fans pre-installed at the top. Additional cooling options are available.

• Fans: The chassis can accommodate up to eight 120mm fans or five 140mm fans in various positions (top, side, rear, PSU cover).
• Radiatorer: Supports radiators up to 360mm in size, typically on the side panel.

2.7. Kabelforvaltning

Brug kabelføringskanalerne og fastgørelsespunkterne bag bundkortbakken til at organisere kablerne. Dette forbedrer luftgennemstrømningen og æstetikken.

Figur 3: Bagside view of the Thermaltake Tower 250, showing I/O and cable routing options.

3. Betjeningsvejledning

Once all components are installed and secured, reattach all panels. Connect your peripherals, monitor, and power cable. Press the power button on the top I/O panel to start your system.

3.1. Forreste I/O-porte

The top panel features convenient I/O ports for easy access:

• 1 x USB 3.2 Gen 2 Type-C-port
• 2 x USB 3.0 porte
• Power knap
• HD Audio Jacks (Headphone/Microphone)

Figure 4: Close-up of the top I/O panel on the Thermaltake Tower 250.

4. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer optimal ydeevne og levetid for dine pc-komponenter.

• Støvfiltre: The Tower 250 includes removable dust filters on the top, rear, inner sides, and inner bottom layer. Regularly remove and clean these filters to prevent dust buildup and maintain good airflow.
• Rengøring af paneler: Brug en blød, damp cloth to clean the exterior panels. For tempered glass, use a glass cleaner. Avoid abrasive materials.
• Indvendig rengøring: Periodically open the case and use compressed air to remove dust from fans, heatsinks, and other components.

5. Fejlfinding

Hvis du støder på problemer, kan du overveje følgende almindelige fejlfindingstrin:

• Ingen strøm: Ensure the PSU is switched on, the power cable is securely connected, and all internal power connections (24-pin, CPU, GPU) are properly seated.
• Ingen visning: Verify that the monitor cable is connected to the GPU (not the motherboard I/O unless using integrated graphics) and that the GPU is fully seated and powered.
• Overophedning: Check fan connections and orientation. Ensure dust filters are clean and there is adequate airflow. Monitor component temperatures using software.
• Komponent ikke fundet: Reseat the component (RAM, GPU, storage drive) and check its power and data connections.

6. Specifikationer

7. Garanti og support

For warranty information and technical support, please refer to the official Thermaltake webwebstedet eller kontakt deres kundeservice direkte. Gem din købsbevis til garantikrav.

8. Kontakt support

Hvis du har brug for yderligere hjælp eller har spørgsmål, der ikke er dækket i denne manual, kan du besøge Thermaltake-butikken på Amazon eller deres embedsmand webwebsted.