Hover-1 Journey 2.0 Electric Scooter User Manual

Indledning

The Hover-1 Journey 2.0 Electric Scooter is designed for adults and teens seeking an efficient and enjoyable commuting solution. Equipped with a powerful 300W brushless motor, it offers a maximum speed of 16 mph and a range of up to 16 miles on a single charge. Its 8.5-inch air-filled tires provide a smooth ride, while the upgraded steering column and two-part folding mechanism enhance handling, stability, and portability. The scooter features a digital LED display for essential ride information and is UL2272 certified for safety.

Figure 1: The Hover-1 Journey 2.0 Electric Scooter.

Sikkerhedsretningslinjer

Your safety is paramount. Always adhere to the following guidelines when operating the Hover-1 Journey 2.0 Electric Scooter:

• Always wear a certified helmet and appropriate safety gear, including knee and elbow pads.
• Sørg for, at scooteren er fuldt opladet, og at alle komponenter er forsvarligt fastgjort før hver tur.
• Overskrid ikke den maksimale vægtgrænse på 120 kg.
• Operate the scooter on smooth, dry surfaces. Avoid wet conditions, loose debris, or steep inclines beyond 15 degrees.
• Be aware of your surroundings and other pedestrians or vehicles. Follow all local traffic laws and regulations.
• Avoid sudden turns or maneuvers at high speeds.
• The scooter is UL2272 certified, indicating it has met safety standards for electric mobility devices.
• Note the "WARNING: DO NOT STEP HERE" sticker on the rear fender, indicating a critical area to avoid stepping on during operation.

Pakkens indhold

Når du åbner pakken, skal du kontrollere, at alle følgende varer er inkluderet:

• Hover-1 Journey 2.0 Electric Scooter
• Hover-1 Wall Charger
• Journey 2.0 User Manual

Opsætning

Follow these steps to set up your Hover-1 Journey 2.0 Electric Scooter:

1. Fold scooteren ud: Carefully lift the steering column until it locks into the upright position. Ensure the folding lock mechanism is securely engaged. The upgraded 2-part folding mechanism with a safety latch provides enhanced stability.
2. Fastgør styret: Insert the handlebars into the steering column and secure them with the provided bolts. Ensure they are tightened firmly.
3. Indledende opkrævning: Before the first ride, fully charge the scooter's 36V/6Ah lithium-ion battery. Connect the Hover-1 Wall Charger to the charging port on the scooter and then to a power outlet. The charging indicator will show when charging is complete (approximately 5 hours).
4. Tjek dæktryk: The 8.5-inch air-filled tires require proper inflation for optimal performance and safety. Check the tire pressure and inflate if necessary according to the recommended PSI (usually found on the tire sidewall or in the quick start guide).

Figure 2: Key specifications of the Hover-1 Journey 2.0.

Betjeningsvejledning

Familiarize yourself with the scooter's controls and functions before riding.

• Tænd/sluk: Press and hold the power button on the handlebars to turn the scooter on or off.
• Digital LED-skærm: The integrated display shows your current speed, battery level, and indicators for high-speed mode, cruise control, and headlight activation.
• Gashåndtag: To accelerate, push off with one foot to gain initial momentum, then press the thumb throttle located on the right handlebar.
• Bremsning: Use the rear disc brake lever on the left handlebar to slow down or stop. The scooter features high-performance rear disc brakes for quick and safe stopping.
• Hastighedstilstande: The scooter offers different speed modes. Refer to the display to switch between modes (e.g., Eco mode for lower speed, Sport mode for maximum speed).
• Forlygte: Activate the headlight for improved visibility in low-light conditions. The headlight icon on the display will indicate its status.
• Foldning: To fold the scooter for storage or transport, disengage the safety latch and folding lock mechanism on the steering column. Carefully fold the column down until it clicks into place.

Figure 3: Handlebar controls and digital display functions.

Figure 4: Portability and folding design of the scooter.

Opretholdelse

Regelmæssig vedligeholdelse sikrer din scooters lange levetid og optimale ydeevne.

• Batteripleje:
  • Oplad batteriet helt efter hver brug, især hvis det opbevares i længere perioder.
  • Undgå at aflade batteriet helt, da dette kan reducere dets levetid.
  • Opbevar scooteren et køligt og tørt sted væk fra direkte sollys og ekstreme temperaturer.
• Vedligeholdelse af dæk:
  • Regularly check the pressure of the 8.5-inch air-filled tires. Proper inflation improves ride quality and prevents punctures.
  • Inspect tires for wear and tear, and replace them if necessary.
• Rensning:
  • Tør scooteren af ​​med reklameamp klud efter brug. Undgå at bruge skrappe kemikalier eller slibende rengøringsmidler.
  • Do not use high-pressure water jets, as this can damage electronic components.
• Generel inspektion:
  • Kontrollér regelmæssigt alle skruer og bolte for at sikre, at de er spændte.
  • Inspect the brake system for proper function and adjust if needed.
  • Ensure the folding mechanism operates smoothly and securely.

Fejlfinding

If you encounter issues with your Hover-1 Journey 2.0, refer to the common problems and solutions below:

If the problem persists after attempting these solutions, please contact Hover-1 customer support for further assistance.

Specifikationer

Garanti og support

The Hover-1 Journey 2.0 Electric Scooter comes with a 6 måneders begrænset garantiDenne garanti dækker fabrikationsfejl og problemer, der opstår ved normal brug. Gem venligst din købsbevis i tilfælde af garantikrav.

For technical support, warranty inquiries, or replacement parts, please visit the official Hover-1 webwebstedet eller kontakt deres kundeserviceafdeling. Du kan finde flere oplysninger og kontaktoplysninger på Hover-1 Store Page.