1. Introduktion
This manual provides detailed instructions for the installation, operation, and maintenance of the LASER TREE P-DA-02 Interface Adapter Board. This board is designed to facilitate compatibility between various laser modules and different laser cutting machines, engraving machines, CNC machines, and 3D printers by addressing discrepancies in pin configurations and voltage krav.
Please read this manual thoroughly before using the product to ensure correct operation and to prevent potential damage.
2. Nøglefunktioner
- Universal kompatibilitet: Designed to work with most brands of laser cutting machines, engraving machines, CNC machines, and 3D printers.
- Voltage and Pin Matching: Facilitates the connection of laser modules to machines with differing DC voltage and pin configurations.
- Nem integration: Suitable for direct assembly within a laser module setup.
- Luftpumpe output: Includes a dedicated 24V DC output for an air pump.
- Strømstyring: Features a power switch with internal (INT) and external (EXT) power source options.
3. Produktet er slutview
The image below illustrates the various components and connection points of the LASER TREE P-DA-02 Interface Adapter Board.
Figur 1: LASER TREE P-DA-2.0 Driver Adapter Board (Version 1.1, 20240121). This image displays the top view of the adapter board, highlighting its various input and output ports, power connections, and control switches. Key components include Input A, B, C, D, E, Output A, Output B, DC Input (12V/24V), DC 24V output for Air Pump, PWM/TTL Power, and a Power Switch with OFF, EXT, and INT settings.
Komponentidentifikation:
- Input A, B, C, D: Standard input ports for connecting to the machine's control board, supporting various pin configurations (12V, 24V, GND, TTL, PWM).
- Input E: Screw terminal input for power and signal, typically for 12V, 24V, GND, TTL, and PWM.
- Output A: Output port for connecting to the laser module, providing 12V, 24V, GND, TTL, and PWM signals.
- Output B: XT60 connector output for high-power laser module connection, providing 12V, 24V, GND, TTL, and PWM signals.
- DC Input (12V/24V): Main power input for the adapter board.
- DC 24V output for Air Pump: Dedicated output for connecting an air pump.
- PWM/TTL Power: Indicates the power source for PWM/TTL signals.
- Power Switch (OFF/EXT/INT): Controls the power to the board, allowing selection between external (EXT) and internal (INT) power sources, or turning it OFF.
4. Opsætningsvejledning
- Identify Machine Interface: Determine the pin configuration and voltage requirements of your laser cutting machine, engraving machine, CNC machine, or 3D printer's control board.
- Select Appropriate Input: Choose the input port (Input A, B, C, D, or E) on the P-DA-02 board that matches your machine's output pins (e.g., 12V, 24V, GND, TTL, PWM).
- Connect Machine to Adapter: Connect the control signals from your machine to the selected input port on the adapter board. Ensure correct pin alignment for voltage, ground, TTL, and PWM signals.
- Connect Laser Module to Adapter: Connect your laser module to either Output A (standard connector) or Output B (XT60 connector) on the adapter board. Verify that the laser module's input requirements match the adapter's output.
- Tilslut jævnstrøm: Connect a compatible 12V or 24V DC power supply to the "DC Input" port on the adapter board.
- Air Pump Connection (Optional): If using an air pump, connect it to the "DC 24V output for Air Pump" port. Ensure the air pump is compatible with 24V DC.
- Set Power Switch: Set the Power Switch to "INT" for internal power or "EXT" if using an external power source for the PWM/TTL signals, or "OFF" when not in use.
Note: This adapter board acts as a transit for signals and power. It is not a driver board or controller board itself.
5. Betjeningsvejledning
- Tænd: After all connections are securely made, switch the Power Switch from "OFF" to either "INT" or "EXT" based on your power configuration. The board should power on.
- Bekræft forbindelser: Before initiating any operations, double-check all connections to ensure they are firm and correctly aligned.
- Start operation: Operate your laser machine or 3D printer as per its own instruction manual. The adapter board will automatically manage the signal and voltage translation between your machine and the laser module.
- Overvåg ydeevne: Observe the laser module's performance. If any issues arise, refer to the Troubleshooting section.
- Sluk: When finished, switch the Power Switch to "OFF" and disconnect the main DC power supply.
6. Vedligeholdelse
- Rensning: Keep the adapter board clean and free from dust and debris. Use a soft, dry cloth for cleaning. Avoid using liquids or abrasive cleaners.
- Opbevaring: Store the board in a dry, cool environment away from direct sunlight and extreme temperatures when not in use.
- Inspektion: Periodically inspect all connections for wear or damage. Ensure screws on terminal blocks are tight.
- Undgå fysisk stress: Do not apply excessive force to the connectors or the board itself.
7. Fejlfinding
Almindelige problemer og løsninger:
- Laser Module Not Responding:
- Verify all power connections to the adapter board and the laser module.
- Check if the Power Switch is set correctly (INT/EXT).
- Ensure the input and output pins are correctly matched and connected according to the pinout diagrams of your machine and laser module.
- Bekræft, at voltage supplied to the adapter board is within the 12V/24V range and matches the laser module's requirements.
- Incorrect Laser Output/Weak Power:
- Check the PWM/TTL signal connection and ensure it is correctly configured.
- Verify that the machine's control board is sending the correct PWM signal.
- Air Pump Not Functioning:
- Ensure the air pump is connected to the dedicated 24V output and is compatible with 24V DC.
- Check the air pump's power connection and functionality independently.
If you encounter issues not covered here or require further assistance, please contact LASER TREE customer support.
8. Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | P-DA-02 |
| Produktdimensioner | 2.56 x 1.96 x 0.87 tommer |
| Varens vægt | 2.08 ounce |
| Input bindtage | 12V / 24V DC (via DC Input or Input E) |
| Udgang Voltage | 12V / 24V DC (matching input) |
| Air Pump Output | 24V DC |
| Signalkompatibilitet | TTL, PWM |
| Fabrikant | LASER TRÆ |
9. Garanti og support
LASER TREE products are manufactured to high-quality standards. For any questions, technical support, or warranty inquiries, please contact LASER TREE customer service directly. Please have your product model number (P-DA-02) and purchase information ready when contacting support.
Contact information can typically be found on the official LASER TREE webwebsted eller via din købsplatform.
