1. Introduktion
Thank you for choosing the Huepar D011CP Purple Laser Level. This device is designed for precise leveling and alignment tasks, featuring a highly visible purple laser beam. Its self-leveling capabilities, multiple brightness settings, and rechargeable battery make it suitable for various indoor and outdoor applications. This manual provides essential information for safe and effective use of your laser level.
Figure 1: Huepar D011CP Purple Laser Level and its accessories, including a carry bag, Type-C charging cable, magnetic stand, user manual, and purple laser glasses.
2. Sikkerhedsoplysninger
ADVARSEL: This product emits laser radiation. Direct exposure to the laser beam can cause eye injury. Always wear appropriate eye protection when operating the device. Do not stare directly into the laser beam. Keep out of reach of children.
- Undgå direkte øjeneksponering for laserstrålen.
- Do not disassemble the device. Repairs should only be performed by authorized service personnel.
- Brug kun den angivne batteritype og opladningsmetode.
- Sørg for, at enheden er stabil før brug for at forhindre utilsigtet bevægelse.
3. Opsætning
3.1 Udpakning og første inspektion
Carefully remove all components from the packaging. Verify that all items listed in the 'Included Components' section are present and undamaged. The package includes: 1x Huepar D011CP Purple Laser Level, 1x Carry Bag, 1x Type-C Charging Cable, 1x Magnetic Stand, 1x User Manual, 1x Purple Laser Level Glasses.
Video 1: An unboxing video demonstrating the contents of the Huepar laser level package and initial setup steps.
3.2 Batteriinstallation og opladning
The device is equipped with a built-in 2200mAh 3.7V Li-ion battery. For first use, charge the battery for more than 4 hours. To charge, connect the provided Type-C charging cable to the device's charging port and a suitable power source (e.g., phone charger, power bank, laptop, car charger). The power indicator will show charging status.
Figure 2: The laser level highlighting its rechargeable lithium battery and the convenient Type-C charging port for easy power replenishment.
3.3 Montering af enheden
The Huepar D011CP can be mounted using its 1/4"-20 threaded mount for tripods or attached to metallic surfaces using the included magnetic stand.
- Magnetic Stand: Attach the magnetic stand to the bottom of the laser level. The strong magnets allow for secure attachment to iron planes or other magnetic surfaces.
- Stativ montering: Screw the device onto a tripod using the 1/4"-20 thread located at the bottom.
Figur 3: Laserniveauvisningenasing its 1/4"-20 thread for tripod mounting and the included L-bracket with magnetic attachment for versatile positioning.
4. Betjeningsvejledning
4.1 Tænd/sluk
To power on the device, slide the pendulum lock switch to the 'UNLOCKED' position. The laser lines will activate. To power off, slide the pendulum lock switch back to the 'LOCKED' position. This also locks the pendulum for safe transport.
4.2 Selvnivellerende tilstand
When the pendulum lock switch is in the 'UNLOCKED' position, the device enters self-leveling mode. It automatically levels within a range of ±3°. If the device is tilted beyond this range, the laser lines will flash rapidly to indicate it is out of level. Adjust the device's position until the lines stop flashing and become steady.
4.3 Manuel tilstand
To activate manual mode, slide the pendulum lock switch to the 'LOCKED' position. Then, press and hold the power button (often labeled with a lightbulb icon) for a few seconds. In manual mode, the laser lines are locked and can be projected at any angle. The laser lines will flash every 5 seconds to remind you that the device is not self-leveling.
4.4 Pulstilstand
Pulse mode is designed for outdoor use or when working over longer distances with a laser receiver. To activate pulse mode, short press the pulse mode button (often labeled 'Pv' or with a pulse icon). The indicator light will illuminate, and the laser lines may appear dimmer to the naked eye. In pulse mode, the working range can extend up to 165 ft (50m) with a compatible Huepar laser receiver (LR-6RG, LR-8RG).
Figure 4: The laser level operating in pulse mode, demonstrating its extended range capability when paired with a Huepar laser receiver for outdoor or long-distance applications.
4.5 Justering af lysstyrke
The D011CP features 3 brightness levels. Short press the brightness adjustment button (often labeled with a lightbulb icon) to cycle through the available brightness settings (100%, 70%, 50%) to suit different lighting conditions.
Figure 5: Illustration of the three adjustable brightness levels (100%, 70%, 50%) of the purple laser lines, allowing users to optimize visibility in various environments.
4.6 Linjeskift
After powering on, the device projects a 360° horizontal line and a 130° vertical line by default. Short press the 'H' button to switch the horizontal line ON/OFF. Short press the 'V' button to switch the vertical line ON/OFF. You can use both lines simultaneously for cross-line projection.
Figur 6: Eksamples of the Huepar D011CP Purple Laser Level projecting 360° horizontal and 130° vertical lines for diverse applications like cabinet installation, flooring, and wall alignment.
5. Vedligeholdelse
- Rensning: Clean the laser windows and the device body with a soft, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Opbevaring: Store the device in its carry bag in a dry, dust-free environment when not in use. Ensure the pendulum lock switch is in the 'LOCKED' position during storage and transport.
- Batteripleje: For optimal battery life, avoid fully discharging the battery frequently. Recharge the battery regularly, even if the device is not in active use.
6. Fejlfinding
- Laserlinjer blinker hurtigt: The device is out of its self-leveling range. Adjust the device's position until the lines become steady.
- Laser lines dim or invisible: Check the brightness setting and adjust if necessary. Ensure you are wearing the purple laser glasses for enhanced visibility. For outdoor use or long distances, activate pulse mode with a compatible laser receiver.
- Enheden tænder ikke: Check the battery level. Recharge the battery if it is low. Ensure the pendulum lock switch is in the 'UNLOCKED' position.
7. Specifikationer
| Model | D011CP |
| Laser klasse | Class2 (IEC/EN60825-1/2014), <1mW |
| Laser bølgelængde | 440-460nm (Purple) |
| Nivelleringsnøjagtighed | ±3 mm/10 m (±1/9 tommer ved 33 fod) |
| Nivellering/kompensationsområde | 3° ± 1° |
| Enkelt måletid | ≤3 sekunder |
| Referencearbejdsafstand (60-100 LUX) | 25 m/82 fod |
| Referencearbejdsafstand (med laserdetektor) | Op til 50m/164ft |
| Strømkilde | Li-ion batteri 3.7V 2200mAh |
| Opladningstid | Omkring 3 timer |
| Referencedriftstid | Omkring 10 timer |
| IP-vurdering | IP54 (Vandtæt, Støvtæt) |
8. Garanti og support
Huepar offers a 2 års garanti for this product, covering free repair or replacement for manufacturing defects. Additionally, Livstids gratis teknisk support is provided for all Huepar products. For warranty claims or technical assistance, please contact Huepar customer service through their official webwebstedet eller forhandleren, hvor produktet blev købt.
