Edvivi udendørs væglampe EW682S-BK brugsanvisning

1. Introduktion

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Edvivi Outdoor Wall Sconce, Model EW682S-BK. This fixture is designed to illuminate outdoor spaces such as porches, patios, garages, and entryways. It features a matte black finish, clear glass panels, and an integrated dusk-to-dawn sensor for automatic operation. Please read this manual thoroughly before installation and retain it for future reference.

Image 1.1: The Edvivi Outdoor Wall Sconce (Model EW682S-BK) installed on an exterior brick wall.

2. Sikkerhedsoplysninger

• ADVARSEL: Risiko for elektrisk stød. Afbryd strømmen til sikringen eller strømafbryderen før installation eller servicering.
• Alle elektriske forbindelser skal være i overensstemmelse med lokale forskrifter, forordninger eller National Electric Code (NEC). Kontakt en kvalificeret elektriker, hvis du ikke er bekendt med korrekt elektrisk ledningsføring.
• This fixture is intended for outdoor use and is waterproof. However, ensure all connections are properly sealed during installation to maintain water resistance.
• Do not install this fixture on a wet surface.
• Use only E26 medium base bulbs, maximum 60 watts. Do not exceed the recommended wattage.
• Håndter glaskomponenter forsigtigt for at forhindre brud.
• Hold brandfarlige materialer væk fra lysarmaturet, når det er i brug.

3. Pakkens indhold

Carefully unpack your fixture and check that all parts are included.

• 1 x Edvivi Outdoor Wall Sconce (Model EW682S-BK)
• 1 x Mounting Hardware Kit (includes mounting bracket, screws, wire nuts)
• 1 x brugsanvisning

Note: An E26 medium base bulb (max 60W) is ikke inkluderet og skal købes separat.

4. Specifikationer

Image 4.1: Product dimensions and bulb type information.

5. Installationsvejledning

Vigtig: Professional installation is recommended. Ensure power is disconnected at the circuit breaker before beginning installation.

Nødvendige værktøjer (ikke inkluderet):

• Skruetrækker (Phillips og/eller flad)
• Trådstrippere
• Elektrisk tape
• Sikkerhedsbriller
• Stige (hvis nødvendigt)

Installationstrin:

1. Sluk for strømmen: Find afbryderen, der styrer lysarmaturets placering, og sluk den. Kontroller, at strømmen er slukket med en lydstyrkemåler.tage tester.
2. Forbered monteringsoverfladen: If replacing an existing fixture, carefully remove it. Ensure the junction box is securely mounted and accessible.
3. Fastgør monteringsbeslag: Secure the provided mounting bracket to the junction box using the screws from the hardware kit. Ensure the bracket is level and firmly attached.
4. Foretag elektriske forbindelser:
   • Tilslut sort ledningen fra armaturet til sort (varm) ledning fra samledåsen ved hjælp af en trådmøtrik.
   • Tilslut hvid ledningen fra armaturet til hvid (neutral) ledningen fra samledåsen ved hjælp af en trådmøtrik.
   • Tilslut jord ledning (blank kobber eller grøn) fra armaturet til jord wire from the junction box and to the mounting bracket using a wire nut or ground screw.
   • Ensure all wire nuts are securely tightened and connections are insulated with electrical tape if desired.
5. Monter armaturet: Juster forsigtigt armaturet med monteringsbeslaget, og fastgør det med de medfølgende skruer. Sørg for, at armaturet flugter med væggen og er stabilt.
6. Installer pære: Insert one E26 medium base bulb (max 60W, not included) into the socket. Do not overtighten.
7. Gendan strøm: Tænd for strømmen igen ved afbryderen.

Image 5.1: Close-up of the E26 medium base bulb socket.

6. Betjeningsvejledning

The Edvivi Outdoor Wall Sconce features a built-in dusk-to-dawn sensor for automatic operation.

• Automatisk tænd/sluk: The integrated sensor detects ambient light levels. The fixture will automatically turn ON when it gets dark (dusk) and turn OFF when it becomes light (dawn).
• Sensorplacering: Ensure the sensor is not obstructed by objects, eaves, or other light sources (e.g., other bright lights, streetlights) that could interfere with its operation.
• Første brug: After installation and restoring power, the light may take a few moments to calibrate or may turn on briefly before turning off if it is daytime.

Image 6.1: Illustration of the dusk-to-dawn sensor functionality.

7. Vedligeholdelse

• Rensning: Sørg for, at strømmen er slukket for at rengøre armaturet. Tør af med en blød, tør klud.amp klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler, da disse kan beskadige overfladen eller glasset.
• Udskiftning af pære:
  1. Sluk for strømmen ved afbryderen.
  2. Allow the old bulb to cool completely before touching.
  3. Skru forsigtigt den gamle pære ud af E26-fatningen.
  4. Screw in a new E26 medium base bulb (max 60W).
  5. Gendan strømmen ved afbryderen.
• Inspektion: Undersøg regelmæssigt armaturet for tegn på skader, løse forbindelser eller slid. Ret eventuelle problemer omgående.

8. Fejlfinding

9. Garanti og support

This Edvivi product is covered by a 1 års begrænset producentgaranti fra købsdatoen. Denne garanti dækker defekter i materialer og udførelse ved normal brug. Den dækker ikke skader som følge af forkert installation, ulykker, misbrug, misbrug eller uautoriserede ændringer.

For warranty claims or technical support, please contact Edvivi customer service through the retailer where the product was purchased or visit the official Edvivi website. Please have your model number (EW682S-BK) and proof of purchase available.

Edvivi Belysning
Visit the Edvivi Store on Amazon