1. Introduktion og overview
The SPEEDY WHEELS Speedywheels MB1 Pro is an electric motobike designed for efficient and stylish urban commuting. It features a powerful 500W nominal motor (700W peak), capable of reaching speeds up to 60 km/h. The 48V 12Ah lithium-ion battery provides an autonomy of up to 60 km per charge, with a full recharge time of approximately 8 hours. This motobike is equipped with 14-inch tubeless tires and a dual front and rear suspension system for enhanced comfort and stability on various terrains. Safety features include LED front lighting and directional lights with sound. A digital display allows real-time speed monitoring. Constructed with a solid aluminum frame, it supports a maximum load of 150 kg, making it suitable for carrying an additional passenger. The MB1 Pro offers a balance of power, range, and comfort for an eco-friendly transportation solution.
Figure 1.1: The Speedywheels MB1 Pro Electric Motobike, showcasindens design og funktioner.
2. Sikkerhedsoplysninger
Please read and understand all safety instructions before operating the Speedywheels MB1 Pro. Failure to follow these instructions may result in serious injury or damage to the motobike.
- Always wear a helmet and appropriate safety gear (gloves, knee pads, etc.) when riding.
- Sørg for, at alle komponenter er forsvarligt fastgjort og i god stand før hver tur.
- Check tire pressure and brake functionality regularly.
- Do not operate the motobike under the influence of alcohol or drugs.
- Overhold lokale færdselslove og -regler.
- Undgå at køre i dårligt vejr (kraftig regn, sne, is).
- Overskrid ikke den maksimale bæreevne på 150 kg.
- Hold hænder og fødder væk fra bevægelige dele.
- Oplad batteriet i et godt ventileret område, væk fra brandfarlige materialer.
3. Pakkens indhold
Ved udpakning skal du kontrollere, at alle nedenstående varer er til stede og ubeskadigede:
- SPEEDY WHEELS Speedywheels MB1 Pro Electric Motobike
- Batterioplader
- Fjernbetjening (til tyverialarm)
- Brugermanual
- Basisværktøjssæt (til montering)
4. Opsætning og montering
The Speedywheels MB1 Pro requires minimal assembly. Follow these steps to prepare your motobike for its first ride:
- Udpakning: Carefully remove all packaging materials. Inspect the motobike for any signs of damage during transit.
- Montering af styr: Attach the handlebars to the steering column. Ensure they are centered and tightened securely using the provided tools.
- Indledende batteriopladning: Before first use, fully charge the battery. Connect the charger to the motobike's charging port and then to a standard power outlet. The indicator light on the charger will change when charging is complete (typically 8 hours).
- Dæktrykskontrol: Verify that the tubeless tires are inflated to the recommended pressure, usually indicated on the tire sidewall.
- Bremsejustering: Test both front and rear brakes to ensure they engage smoothly and effectively. Adjust cable tension if necessary.
- Fjernbetjeningsparring: If the remote control is not pre-paired, follow the instructions in the remote control's specific manual to pair it with the motobike's anti-theft system.
Figur 4.1: Overview of key features including battery, motor, display, and tires, relevant for initial setup and understanding components.
5. Betjeningsvejledning
Familiarize yourself with the controls and functions of your Speedywheels MB1 Pro for a safe and enjoyable ride.
5.1 Tænd/sluk
- To power on, insert the key into the ignition and turn it to the 'ON' position. The digital display will illuminate.
- For at slukke skal du dreje nøglen til 'OFF'-positionen og fjerne den.
5.2 Digital skærm
The digital display provides essential information during operation:
- Hastighedsindikator: Shows your current speed in km/h.
- Batteriniveau: Viser den resterende batteriopladning.
- Kilometertæller/triptæller: Sporer den samlede distance eller den aktuelle rejsedistance.
- Lysindikator: Viser, når forlygterne er aktive.
5.3 Ridning
- Once powered on, gently twist the throttle on the right handlebar to accelerate.
- Use the brake levers on both handlebars to slow down or stop. Apply both brakes simultaneously for optimal stopping power.
- Activate the LED headlight for visibility, especially in low-light conditions.
- Use the directional signals (with audible sound) when turning to alert other road users.
Figure 5.1: The motobike in motion, illustrating its speed capability for urban and inclined routes.
5.4 Anti-theft Alarm
The motobike is equipped with an intelligent anti-theft alarm system controlled by the remote.
- Press the lock button on the remote to arm the alarm. Any movement or tampering will trigger an audible alert.
- Tryk på oplåsningsknappen for at deaktivere alarmen.
- Refer to the remote control's specific instructions for advanced features.
Figure 5.2: The remote control for the intelligent anti-theft alarm system, providing enhanced security for the motobike.
6. Vedligeholdelse
Regular maintenance ensures the longevity and safe operation of your Speedywheels MB1 Pro.
- Batteripleje:
- Oplad batteriet regelmæssigt, selvom det ikke er i brug, for at bevare dets sundhedstilstand.
- Undgå at dræne batteriet helt.
- Store the motobike and battery in a cool, dry place.
- Vedligeholdelse af dæk:
- Kontroller dæktrykket ugentligt, og pump det op til den anbefalede PSI.
- Undersøg dækkene for slid, snitsår eller punkteringer.
- Bremsesystem:
- Kontroller regelmæssigt bremseklodserne for slid, og udskift dem, når det er nødvendigt.
- Ensure brake levers operate smoothly and return to their original position.
- Check brake cables for fraying or damage.
- Generel rengøring:
- Clean the motobike with a damp klud. Undgå at bruge højtryksvandstråler direkte på elektriske komponenter.
- Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Affjedring:
- Periodically check the front and rear suspension for proper function and lubrication.
7. Fejlfinding
This section addresses common issues you might encounter with your Speedywheels MB1 Pro.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Motobike does not power on. | Battery is low or depleted. Key is not in 'ON' position. | Charge the battery fully. Ensure the key is turned to 'ON'. |
| Reduceret rækkevidde eller effekt. | Battery not fully charged. Overloaded motobike. Low tire pressure. | Ensure battery is fully charged. Do not exceed max load. Check and inflate tires. |
| Bremserne føles svage eller svampede. | Worn brake pads. Loose brake cables. | Inspect and replace brake pads. Adjust brake cable tension. |
| Alarmen reagerer ikke på fjernbetjeningen. | Remote battery low. Remote not paired. | Replace remote battery. Re-pair remote control (refer to remote manual). |
8. Specifikationer
Detailed technical specifications for the Speedywheels MB1 Pro Electric Motobike.
| Feature | Specifikation |
|---|---|
| Motorkraft | 500W Nominal (700W Peak) |
| Max hastighed | Op til 60 km / h |
| Batteritype | 48V 12Ah lithium-ion |
| Max rækkevidde | Up to 60 km (per charge) |
| Opladningstid | Cirka 8 timer |
| Dækstørrelse | 14-inch Tubeless |
| Affjedring | For og bag |
| Max belastningskapacitet | 150 kg |
| Rammemateriale | Aluminium |
| Belysning | LED Front Light, Directional Lights with Sound |
| Vise | Digitalt display |
Figure 8.1: Visual representation of key technical data including HD display, max load, tire size, and LED illumination.
9. Garanti og support
SPEEDY WHEELS products are manufactured to high-quality standards. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to your purchase documentation for specific warranty terms and duration.
For technical support, warranty claims, or spare parts, please contact SPEEDY WHEELS customer service through the retailer where the product was purchased or visit the official SPEEDY WHEELS webwebsted for kontaktoplysninger.
When contacting support, please have your product model (MB1 Pro) and purchase date readily available.
