1. Introduktion
Thank you for choosing the VTOMAN X5 Jump Starter with Air Compressor and the VTOMAN V3 Pro Jump Starter. These devices are designed to provide reliable and portable power solutions for your vehicle and other electronic devices. The X5 model combines a powerful jump starter with a digital tire inflator, while the V3 Pro offers a compact and efficient jump-starting solution. Please read this manual thoroughly before using the products to ensure safe and optimal operation.
2. Sikkerhedsoplysninger
Always observe the following safety precautions when operating the jump starters and air compressor:
- Udsæt ikke enheden for regn eller våde forhold.
- Betjen ikke enheden, hvis den er blevet tabt eller beskadiget.
- Opbevares utilgængeligt for børn.
- Sørg for tilstrækkelig ventilation under brug og opladning.
- Do not short-circuit the clamps.
- Tilslut altid den positive (+) polamp til den positive (+) terminal og den negative (-) terminalamp to the negative (-) terminal or a suitable ground point on the vehicle chassis.
- Afbryd clamps from the vehicle battery immediately after jump-starting.
- Avoid prolonged operation of the air compressor to prevent overheating. Allow it to cool down between uses.
- Brug øjenbeskyttelse, når du bruger jumpstarteren.
3. Pakkens indhold
Bekræft at alle varer er til stede i din pakke:
- VTOMAN X5 Jump Starter med luftkompressor
- VTOMAN V3 Pro Jump Starter
- Heavy-duty Smart Jumper Cables (for X5)
- Heavy-duty Smart Jumper Cables (for V3 Pro)
- Air Hose Extension
- Various Nozzles (for air inflation)
- USB-C ladekabel
- Brugermanual
Image: VTOMAN X5 and V3 Pro Jump Starters shown with their respective jumper cables and air inflation accessories. The X5 is black with a digital display, and the V3 Pro is black and orange.
4. Produktfunktioner
4.1 VTOMAN X5 Jump Starter & Air Compressor
- Powerful 3500A Peak Current: Kan starte 12V-køretøjer med op til 9L benzin- eller 8L dieselmotorer.
- 160PSI digital luftkompressor: Inflates car tires to 20 PSI in approximately 2 minutes. Features real-time tire pressure detection and auto shut-off.
- 5.1-Inch Smart Screen: Displays battery level, inflator mode, inflate volume, and tire pressure in PSI, BAR, and KPA.
- "BOOST" Function: For completely dead or low-voltage batteries, allowing immediate restart.
- Multi-purpose Inflation: Includes nozzles for cars, bikes, balls, mattresses, and pool floats.
Image: The VTOMAN X5 Jump Starter connected to a car battery, highlighting its 3500A peak current and compatibility with 12V, 9.0L gas, and 8.0L diesel engines, capable of 60+ starts.
Image: The VTOMAN X5 functioning as a 160 PSI cordless tire inflator, demonstrating its use for bicycles, balls, inflatable boats, cars, and motorcycles, with a claim of 0 to 20 PSI in 2 minutes.
Image: A close-up of the VTOMAN X5's large 5.1-inch smart screen, showing digital readouts for battery level, inflator mode, and real-time tire pressure.
4.2 VTOMAN V3 Pro Jump Starter
- 2000A spidsstrøm: Capable of jump-starting 12V vehicles with up to 6L gasoline or 4L diesel engines.
- Ekstrem temperaturdrift: Functions reliably in temperatures from -4°F to 140°F (-20°C to 60°C).
- Bærbar og kompakt: Weighs less than 0.7 pounds and measures 5.9 x 3.2 x 1.2 inches, designed for easy carrying.
- Power Bank funktionalitet: Equipped with USB-A (5V/2.1A) and USB-C (5V/2A) ports for charging mobile devices.
Image: The VTOMAN V3 Pro Jump Starter connected to a car battery, indicating its 2000A peak current and compatibility with 12V, 6.0L gas, and 4.0L diesel engines, also featuring a Boost function.
Image: The VTOMAN V3 Pro Jump Starter being used as a power bank, charging a smartphone and a smartwatch, with indicators for battery capacity (100%, 75%, 50%, 25%).
Image: A hand holding the VTOMAN V3 Pro Jump Starter, illustrating its pocket-sized and compact design, with dimensions of 5.95 x 3.15 x 1.15 inches and a weight of 0.61 lbs.
5. Opsætning
5.1 Opladning af jumpstarteren
Before first use, fully charge your VTOMAN jump starter. It is recommended to charge the unit every 3-6 months to maintain battery health, even if not in use.
- Tilslut det medfølgende USB-C-opladerkabel til Type-C-indgangsporten på jumpstarteren.
- Connect the other end of the USB-C cable to a USB wall adapter (not included) or a powered USB port.
- The display (X5) or indicator lights (V3 Pro) will show the charging progress. The unit is fully charged when the battery indicator shows full.
- Charging time for the V3 Pro is approximately 2.6 hours for a full charge.
Image: The VTOMAN X5 Jump Starter being charged via its Type-C port, with an arrow pointing to the correct charging input. A note clarifies that the DC port is for output, not charging.
Image: The VTOMAN V3 Pro Jump Starter connected to a wall charger, indicating it can be fully charged in 2.6 hours and has a 24-month standby time.
6. Betjeningsvejledning
6.1 Jumpstart af et køretøj
- Sørg for, at jumpstarteren er tilstrækkeligt opladet (mindst 50 % anbefales).
- Sluk bilens tænding og alt tilbehør.
- Connect the smart jumper cable's blue plug firmly into the jump starter's port.
- Tilslut rød (+) clamp til køretøjets positive (+) batteripol.
- Tilslut sort (-) clamp to the vehicle's negative (-) battery terminal or a solid, unpainted metal part of the engine block/chassis.
- Once connected correctly, the indicator on the smart cable will show a solid green light (or similar indication). If the battery is completely dead, press the "BOOST" button on the jump starter (X5) or the smart cable (V3 Pro) if available, and wait for the indicator to turn green.
- Start the vehicle. If it doesn't start, wait 30 seconds and try again. Do not attempt more than 3 consecutive starts.
- Når køretøjet starter, skal den sorte (-) kobling straks frakobles.amp først, derefter den røde (+) clamp.
- Disconnect the smart cable from the jump starter.
6.2 Using the Air Compressor (X5 Only)
- Connect the air hose to the air output port on the X5 jump starter.
- Attach the appropriate nozzle to the air hose and connect it to the item you wish to inflate (e.g., tire valve).
- Turn on the X5 unit. The 5.1-inch screen will display the current pressure.
- Brug knapperne '+' og '-' til at indstille det ønskede tryk.
- Press the inflation button to start the compressor. The compressor will automatically stop once the preset pressure is reached.
- Disconnect the air hose from the item and the X5 unit.
6.3 Brug som powerbank
Both the X5 and V3 Pro can be used to charge portable electronic devices.
- Connect your device's USB charging cable to the appropriate USB output port on the jump starter (USB-A or USB-C).
- Jumpstarteren vil automatisk begynde at oplade din enhed.
- Overvåg din enheds opladningsstatus.
7. Vedligeholdelse
- Rensning: Tør enheden af med en blød, tør klud. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
- Opbevaring: Store the jump starter in a cool, dry place away from direct sunlight and extreme temperatures. Ensure it is fully charged before long-term storage.
- Batteripleje: Recharge the unit at least once every 3-6 months to prolong battery life, even if not in use.
- Kabelinspektion: Kontrollér regelmæssigt startkablerne og koblingerne.amps for any signs of damage, corrosion, or wear. Replace if necessary.
8. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Enheden tænder ikke. | Batteriet er afladet. | Oplad enheden helt. |
| Køretøjet starter ikke med startkabler. | Incorrect cable connection; Battery too dead; Vehicle issue. | Ensure correct polarity (+ to +, - to -). Use "BOOST" function if battery is completely dead. Check vehicle's battery and starter system. |
| Luftkompressoren puster sig ikke op. | Hose not connected properly; Desired pressure already reached; Unit overheated. | Check hose connection. Verify target pressure. Allow unit to cool down if used continuously. |
| Smart cable indicator shows red/error. | Reverse polarity; Short circuit; Battery voltage for lavt. | Disconnect and reconnect with correct polarity. Ensure clamps are not touching each other. Use "BOOST" function. |
9. Specifikationer
VTOMAN X5
- Peak Current: 3500A
- Motorkompatibilitet: Up to 9.0L Gas / 8.0L Diesel (12V vehicles)
- Air Compressor Pressure: 160 PSI (maks.)
- Vise: 5.1-inch Smart Screen
- Input: USB-C
- Produktion: Jump Start Port, USB-A, USB-C, DC 15V/10A
VTOMAN V3 Pro
- Peak Current: 2000A
- Motorkompatibilitet: Up to 6.0L Gas / 4.0L Diesel (12V vehicles)
- Driftstemperatur: -4°F til 140°F (-20°C til 60°C)
- Dimensioner: 5.9 x 3.2 x 1.2 tommer (ca.)
- Vægt: Less than 0.7 lbs (approx.)
- Input: USB-C
- Produktion: Jump Start Port, USB-A (5V/2.1A), USB-C (5V/2A)
- Opladningstid: Cirka 2.6 timer (0-100%)
10. Garanti og support
VTOMAN products are designed for reliability and performance. For specific warranty details, product registration, or technical support, please refer to the warranty card included with your product or visit the official VTOMAN webwebsted. Behold din købskvittering som købsbevis i tilfælde af garantikrav.
Official VTOMAN Store: Visit the VTOMAN Store on Amazon
