KRUX Empero ATX PC-kabinet brugermanual

1. Introduktion

This manual provides detailed instructions for the installation, operation, and maintenance of your KRUX Empero ATX PC Case. Please read this manual thoroughly before beginning assembly to ensure proper installation and safe operation. The KRUX Empero case is designed to accommodate ATX motherboards and offers extensive cooling options and component compatibility.

Figur 1: Forside view of the KRUX Empero ATX PC Case, showcasing its glass panels and pre-installed ARGB fans.

2. Produktfunktioner

• Four 120mm ARGB PWM Fans: Pre-installed for efficient cooling and customizable lighting.
• ARGB Controller Splitter: Manages fan lighting and synchronization.
• Glaspaneler: Front and side tempered glass panels provide an unobstructed view af interne komponenter.
• Dobbeltkammerdesign: Separates the power supply and storage drives from the main components for improved airflow and aesthetics.
• Liquid Cooler Compatibility: Supports 120mm, 240mm, 280mm, and 360mm liquid cooling radiators.
• Moderne front-I/O: Includes a USB-C port, USB 3.0 port, and audio jacks for convenient connectivity.
• GPU clearance: Accommodates graphics cards up to 420mm in length.

3. Pakkens indhold

Bekræft at alle komponenter er til stede i pakken:

• KRUX Empero ATX PC Case
• 4 x 120mm ARGB PWM Fans (pre-installed)
• ARGB Controller Splitter (pre-installed)
• Tilbehørsæske (skruer, kabelbindere, afstandsstykker)
• Brugermanual

Figur 2: Eksploderet view illustrating the various components of the KRUX Empero PC case, including panels, frame, and fans.

4. Opsætning og installation

Follow these steps for proper component installation.

4.1 Afmontering af paneler

1. Carefully remove the tempered glass side panel by unscrewing the thumb screws at the rear of the case.
2. Remove the front glass panel if necessary for fan or radiator installation.

4.2 Installation af bundkort

1. Installer I/O-skjoldet i den bageste åbning af kabinettet.
2. Juster dit ATX-bundkort med de forudinstallerede afstandsstykker.
3. Fastgør bundkortet med de medfølgende skruer.

4.3 Installation af strømforsyningsenhed (PSU).

The KRUX Empero features a dual-chamber design. The PSU is installed in the rear chamber.

1. Mount the PSU to the PSU bracket, typically located at the rear bottom of the case.
2. Slide the PSU with its bracket into the designated compartment and secure it with screws.

4.4 Installation af lagerdrev

The case supports multiple storage drives. Refer to the case interior for specific mounting points for 2.5" SSDs and 3.5" HDDs.

1. Secure 2.5" SSDs to the dedicated mounting plates, often found behind the motherboard tray.
2. Install 3.5" HDDs into the drive cages, usually located in the PSU shroud area.

4.5 Installation af grafikkort (GPU)

Kabinettet understøtter GPU'er op til 420 mm i længden.

1. Fjern de nødvendige PCIe-slotdæksler på bagsiden af ​​kabinettet.
2. Insert the GPU into the appropriate PCIe slot on your motherboard.
3. Secure the GPU with screws.

4.6 Installation af kølesystem

The case comes with four 120mm ARGB PWM fans pre-installed. Additional fans or liquid coolers can be added.

• Fans: The case supports various fan configurations. Ensure proper airflow direction (intake/exhaust).
• Liquid Coolers: Radiators up to 360mm can be mounted. Consult your liquid cooler's manual for specific installation steps.

Figur 3: Interiør view of the KRUX Empero case with the side panel removed, highlighting the spacious layout for components and cooling solutions.

4.7 Forreste I/O-forbindelser

Tilslut frontpanelkablerne til dit bundkort i henhold til bundkortets manual.

• USB-C: Connect the USB-C header cable to your motherboard's USB 3.2 Gen 2 header.
• USB 3.0: Connect the USB 3.0 header cable to your motherboard's USB 3.0 header.
• USB 2.0: Connect the USB 2.0 header cable to your motherboard's USB 2.0 header.
• HD-lyd: Connect the HD Audio cable to your motherboard's audio header.
• Power SW, Reset SW, HDD LED, Power LED: Connect these small connectors to the corresponding pins on your motherboard's front panel header.
• LED knap: Connect the LED button cable to the ARGB controller for lighting control.

Figure 4: Close-up of the top-front I/O panel, featuring USB-C, USB 3.0, audio ports, and control buttons.

5. Betjeningsvejledning

5.1 Tænd

Once all components are installed and cables are connected, press the power button on the front I/O panel to start your system.

5.2 ARGB-blæserstyring

The pre-installed ARGB fans are connected to a controller. Use the dedicated LED button on the front I/O panel to cycle through various lighting modes and colors. For advanced control, connect the controller to your motherboard's ARGB header (if available) and use the motherboard's software.

6. Vedligeholdelse

Regelmæssig vedligeholdelse er med til at sikre optimal ydeevne og levetid for dit pc-kabinet.

• Støvfiltre: The KRUX Empero case includes removable dust filters. Periodically remove and clean these filters with compressed air or water (ensure they are completely dry before reinstallation).
• Glaspaneler: Clean tempered glass panels with a soft, lint-free cloth and a glass cleaner. Avoid abrasive materials that could scratch the surface.
• Indvendig rengøring: Brug trykluft til at fjerne støv fra interne komponenter og ventilatorblade. Sørg for, at systemet er slukket og frakoblet, før rengøring.

7. Fejlfinding

Hvis du støder på problemer under eller efter installationen, kan du overveje følgende almindelige fejlfindingstrin:

• Ingen strøm: Sørg for, at strømforsyningen er tændt, at alle strømkabler (24-bens, 8-bens CPU, GPU PCIe) er tilsluttet korrekt, og at frontpanelets strømafbryderkabel er korrekt tilsluttet bundkortet.
• Fans Not Spinning/No ARGB: Check fan power connections to the motherboard or controller. Verify ARGB cables are properly connected to the controller and/or motherboard header.
• Ingen visning: Confirm the monitor cable is connected to the graphics card (not the motherboard's integrated graphics port, unless using integrated graphics). Reseat the graphics card and RAM modules.
• USB-porte virker ikke: Ensure the front panel USB 3.0 and USB-C cables are correctly connected to the motherboard headers.

8. Specifikationer

9. Garanti og support

Specific warranty information for the KRUX Empero ATX PC Case is not provided in this document. For detailed warranty terms, technical support, or further assistance, please refer to the official KRUX webwebsted eller kontakt din forhandler.