1. Vigtige sikkerhedsforanstaltninger
Please read all instructions carefully before using your Brio Sparkling 600 Series Countertop Water Cooler. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Tilslut altid apparatet til en jordforbundet stikkontakt.
- Nedsænk ikke apparatet, ledningen eller stikket i vand eller andre væsker.
- Supervise children when the appliance is in use, especially when dispensing hot water, due to the risk of scalding.
- Place the appliance on a stable, level surface, away from direct sunlight and heat sources.
- Sørg for tilstrækkelig ventilation omkring apparatet.
- Only use CO2 cylinders with M18x1.5 thread.
2. Produktet er slutview
The Brio Sparkling 600 Series Countertop Water Cooler provides instant hot, cold, room temperature, and sparkling water. It features a 2-stage filtration system and UV sterilization for clean, great-tasting water.
Komponenter
- Sparkling Water Countertop Dispenser Unit
- Sedimentfilter
- Kulstofblokfilter
- Filter Flushing Housing and Tubing
- Brugermanual
- Refillable 5-Liter Water Tank
Visuel guide
3. Opsætning
Follow these steps for initial setup of your water cooler.
3.1 Udpakning og placering
- Fjern alt emballagemateriale.
- Place the unit on a flat, stable countertop. Ensure there is at least 4 inches of clearance from walls for proper ventilation.
3.2 Filter Flushing and Installation
Before installing the filters into the unit, they must be flushed to remove carbon fines.
- Connect the provided filter flushing housing and tubing to a cold water tap.
- Attach the sediment filter (Stage 1) to the flushing housing.
- Run water through the sediment filter for 5 minutes or until the water runs clear.
- Repeat the flushing process for the carbon block filter (Stagog 2).
- Once flushed, install the sediment filter into the designated 'Stage 1' slot and the carbon block filter into the 'Stage 2' slot inside the unit. Twist to secure.
3.3 CO2 Cylinder Installation
This unit requires a 60L screw-in type CO2 cylinder with M18x1.5 thread (not included).
- Open the side panel of the water cooler.
- Carefully screw the CO2 cylinder into the designated port until hand-tight. Do not overtighten.
- Luk sidepanelet.
3.4 Water Tank Filling or Direct Water Line Connection
Choose one of the following methods to supply water to your cooler:
Method A: Refillable Water Tank
- Remove the 5-liter water tank from the unit.
- Fyld tanken med drikkevand.
- Carefully place the filled tank back into its position on the unit.
Method B: Direct Water Line Connection (Optional)
For continuous water supply, the unit can be connected to a cold-water line. Consult a qualified plumber if you are unsure about this installation.
- Find vandindløbsporten på bagsiden af enheden.
- Connect the provided water line tubing to the unit and to your cold-water supply. Ensure all connections are secure and leak-free.
- Slowly open the water supply valve to allow water to flow into the unit.
3.5 Strømtilslutning
Plug the power cord into a grounded electrical outlet. The unit will begin heating and cooling water. Allow approximately 15-30 minutes for water to reach desired temperatures.
4. Betjeningsvejledning
The Brio Sparkling 600 Series features a user-friendly touch-sensitive LED interface.
4.1 Kontrolpanelfunktioner
- Låseknap: Activates/deactivates the child safety lock for hot water. Press and hold for a few seconds to unlock before dispensing hot water.
- Hot Button: Doserer varmt vand.
- Room Button: Doserer vand med stuetemperatur.
- Cold Button: Uddeler koldt vand.
- Sparkling Button: Dispenses sparkling water.
- Replace Filters Indicator: Illuminates when filters need replacement.
- Replace CO2 Indicator: Illuminates when the CO2 cylinder needs replacement.
4.2 Vandudlevering
- Place your cup or container under the dispenser nozzle.
- For hot water, press and hold the Låse button for a few seconds until it unlocks, then press and hold the Varmt knap.
- For room, cold, or sparkling water, simply press and hold the corresponding button.
- Release the button when your desired amount of water has been dispensed.
5. Vedligeholdelse
Regular maintenance ensures optimal performance and longevity of your water cooler.
5.1 Cleaning the Exterior and Drip Tray
- Tør ydersiden af med en blød, damp klæde. Brug ikke slibende rengøringsmidler.
- The drip tray can be removed and washed with mild soap and water. Ensure it is completely dry before reinserting.
5.2 Filterudskiftning
The 'Replace Filters' indicator will illuminate when it's time to change your filters. Recommended replacement schedule may vary based on water quality and usage.
- Udskiftningsfiltersæt: Brio MIB200PKF
- Sediment Filter Only: Brio NFMPP5M
- Carbon Block Filter Only: Brio NFMCTO5MS2
To replace filters, turn off the water supply and power to the unit. Twist the old filters counter-clockwise to remove. Install new, pre-flushed filters by twisting clockwise until secure. Turn on water and power, then flush a few cups of water to remove any air.
5.3 Udskiftning af CO2-cylinder
The 'Replace CO2' indicator will illuminate when the cylinder is empty.
- Ensure the unit is not actively dispensing sparkling water.
- Open the side panel and unscrew the empty CO2 cylinder.
- Install a new 60L CO2 cylinder (M18x1.5 thread) as described in Section 3.3.
5.4 Automatic UV Self-Cleaning
This unit features an automatic UV-C self-cleaning cycle that sanitizes the cold water tank to reduce biofilm buildup and other contaminants. This process runs automatically and requires no user intervention.
6. Fejlfinding
Se dette afsnit for almindelige problemer og deres løsninger.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Der udleveres ikke vand | Water tank empty or water supply off; filters clogged; power issue. | Refill water tank or check direct water line connection; replace filters; check power connection. |
| Vandet er ikke varmt/koldt nok | Unit recently plugged in; heating/cooling elements not fully engaged. | Allow 15-30 minutes for the unit to reach optimal temperatures. |
| Intet brusende vand | CO2 cylinder empty or improperly installed. | Check 'Replace CO2' indicator; replace or re-install CO2 cylinder. |
| Lækage fra enhed | Løse forbindelser; beskadiget komponent. | Check all water line and filter connections; contact customer support if issue persists. |
| 'Replace Filters' indicator on | Filters have reached end of life. | Replace both sediment and carbon block filters. |
7. Specifikationer
- Produktmål (L x B x H): 19.29 x 14.4 x 16.73 tommer
- Vægt: 55.1 pund
- Modelnummer: CLCTPOU630UV2SB
- Vandtankkapacitet: 5 liter
- Filtreringssystem: 2-Stage (Sediment, Activated Carbon Block)
- Filtration Certification: NSF/ANSI 42
- Sterilisering: UV-C (Automatic Self-Cleaning)
- Water Temperatures: Hot, Cold, Room Temperature, Sparkling
- CO2 Cylinder Requirement: 60L screw-in type with M18x1.5 thread (not included)
- Materiale: Plastic (with brushed stainless-steel exterior accents)
8. Garanti og support
For warranty information, technical support, or to purchase replacement parts and filters, please visit the official Brio website or contact Brio customer service. Keep your purchase receipt for warranty claims.
Brio Customer Support: Refer to your product packaging or the official Brio webhjemmeside for aktuelle kontaktoplysninger.
