INGCO 20V børsteløs batteridrevet slagboremaskine CDLI205582 brugermanual

1. Introduktion

Thank you for choosing the INGCO 20V Brushless Cordless Impact Drill, model CDLI205582. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new tool. Please read these instructions carefully before use and retain them for future reference.

This powerful and versatile tool is designed for drilling into wood, metal, and masonry, as well as for driving screws. Its brushless motor ensures enhanced efficiency and longer tool life.

2. Sikkerhedsoplysninger

Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Keep your work area clean and well-lit. Wear appropriate personal protective equipment, including eye protection, hearing protection, and gloves. Ensure the tool is switched off and the battery is removed before making any adjustments or changing accessories.

3. Produktet er slutview og komponenter

The INGCO CDLI205582 drill comes with a comprehensive set of accessories to support various tasks.

Figur 1: The INGCO 20V Brushless Cordless Impact Drill, shown with its two 2.0Ah batteries, battery charger, a selection of drill bits, screw bits, and the durable carrying case.

Figur 2: En overview highlighting the drill's brushless motor, 20V voltage, 0-500/0-2000 RPM no-load speed, 30,000 BPM impact rate, 55 Nm max torque, 13mm metal chuck, 22+1 torque settings, 2-speed gear, spindle lock, LED work light, battery indicator, two 2.0Ah batteries, charger, 47 accessories, and carrying case.

Inkluderede komponenter:

• 1 x INGCO 20V Brushless Cordless Impact Drill
• 2 x 2.0 Ah batterier
• 1 x Battery Charger (220-240V~50/60Hz)
• 47 x Accessories (drill bits, screw tips, masonry bits)
• 1 x Industrial-grade Carrying Case

4. Opsætning

4.1 Batteriinstallation og opladning

1. Opladning af batteriet: Connect the charger to a power outlet. Slide the battery pack onto the charger until it clicks into place. The indicator light on the charger will show the charging status. Ensure the battery is fully charged before first use.
2. Installation af batteriet: Align the battery pack with the base of the drill handle. Slide the battery into the handle until it locks securely into place.
3. Fjernelse af batteriet: Press the battery release button (usually located on the side of the battery pack) and slide the battery out of the handle.

4.2 Accessory Installation (Chuck Operation)

Figur 3: The 13mm metal chuck provides stable clamping for various accessories. The image shows a drill bit securely inserted into the chuck.

1. Opening the Chuck: Rotate the chuck counter-clockwise until the jaws are wide enough to insert the desired accessory (drill bit, screwdriver bit).
2. Inserting the Accessory: Insert the shank of the accessory into the chuck as far as it will go.
3. Tightening the Chuck: Rotate the chuck clockwise to tighten the jaws firmly around the accessory. Ensure the accessory is centered and securely held to prevent slippage during operation. The all-metal chuck provides robust grip.

5. Betjeningsvejledning

5.1 Tænd/sluk og variabel hastighedstrigger

The drill is powered on by pressing the trigger switch and turned off by releasing it. The variable speed trigger allows for precise control over the drilling or driving speed. Pressing the trigger further increases the speed.

5.2 Fremad-/bagudrotation

A switch located above the trigger controls the direction of rotation. Push the switch to the left for forward rotation (drilling/driving) and to the right for reverse rotation (removing screws/bits). Ensure the switch is in the center position to lock the trigger and prevent accidental startup.

5.3 2-Speed Gearbox

Figur 4: The mechanical 2-speed gear selector allows you to choose between low speed (0-500 RPM) for high torque applications and high speed (0-2000 RPM) for faster drilling.

The drill features a mechanical 2-speed gearbox for optimal performance across different applications:

• Gear 1 (lav hastighed): 0-500 RPM. Provides higher torque, ideal for driving screws and drilling larger holes in tough materials.
• Gear 2 (Høj hastighed): 0-2000 RPM. Provides faster speed, suitable for drilling smaller holes in wood and metal.

Always shift gears when the drill is stopped to prevent damage to the gearbox.

5.4 Momentindstillinger (22+1)

Figur 5: The torque adjustment ring allows selection of 22 different torque settings for precise control, plus a dedicated drill mode. This enables adaptation to various working conditions and materials.

The torque adjustment ring allows you to select from 22 torque settings, plus a dedicated drill mode. This feature prevents over-driving screws and damaging materials. Rotate the ring to the desired setting:

• Indstillinger 1-22: For driving screws. Lower numbers for smaller screws or softer materials, higher numbers for larger screws or harder materials.
• Drill Symbol: For drilling operations, providing maximum torque without clutch engagement.

5.5 Drilling Modes (Impact Function)

Figur 6: This image shows the drilling capacities of the INGCO impact drill: Max. Ø35mm for wood, Max. Ø13mm for metal, and Max. Ø10mm for concrete, utilizing its 55Nm impact function.

The drill offers two primary modes, selected via the mode selector ring:

• Boretilstand: For standard drilling in wood and metal, and for driving screws.
• Slagboremaskine-tilstand: For drilling into masonry and concrete, utilizing a hammering action in addition to rotation. This mode delivers up to 30,000 BPM (Blows Per Minute).

Figur 7: The drill in action, demonstrating its capability to drill into concrete, highlighting its impact function.

5.6 LED Work Light and Battery Indicator

Figur 8: The integrated LED work light illuminates the work surface, improving visibility in dimly lit areas. The image shows the light active during a drilling task.

The integrated LED work light automatically illuminates when the trigger is pressed, providing visibility in dark or confined spaces. A battery indicator on the tool displays the remaining charge level.

5.7 Børsteløs motorteknologi

Figur 9: This diagram visually represents the brushless motor technology within the drill, emphasizing its efficiency and ability to deliver a maximum torque of 60 Nm (note: product specifications state 55 Nm, refer to specifications for accurate value).

The brushless motor offers several advantages over traditional brushed motors, including:

• Øget effektivitet: Up to 30% more efficient, leading to longer runtime per battery charge.
• Longer Tool Life: No carbon brushes to wear out, reducing maintenance and extending the lifespan of the tool.
• Mere kraft: Delivers consistent power and higher torque (55Nm max torque).

5.8 Ledningsfri drift

Figur 10: This image contrasts the freedom and flexibility of the cordless INGCO drill with the limitations of a traditional corded drill, emphasizing portability and ease of use.

The 20V cordless design provides maximum portability and flexibility, allowing you to work in various locations without the need for a power outlet.

6. Vedligeholdelse

6.1 Rengøring af værktøjet

Regularly clean the ventilation openings of the drill to prevent overheating. Use a soft, damp cloth to wipe down the tool. Do not use harsh chemicals or abrasive cleaners. Ensure the battery is removed before cleaning.

6.2 Pleje af batterier

• Opbevar batterier på et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
• Opbevar ikke batterier i afladet tilstand i længere perioder. Oplad dem med jævne mellemrum, hvis de ikke er i brug.
• Avoid dropping or physically damaging the battery packs.

6.3 Opbevaring

When not in use, store the drill and its accessories in the provided carrying case. Keep the tool out of reach of children and in a secure, dry location.

7. Fejlfinding

8. Specifikationer

9. Garanti og support

For warranty information, please refer to the warranty card included with your product or visit the official INGCO website. Keep your purchase receipt as proof of purchase. For technical support or service inquiries, please contact INGCO customer service through their official channels.