1. Introduktion
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Darmoshark N7 Wireless Gaming Mouse. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
2. Pakkens indhold
Bekræft, at alle varer er til stede i din produktpakke:
- Darmoshark N7 Wireless Gaming Mouse
- USB-C lade-/datakabel
- 8K Wireless Receiver (USB Dongle)
- Brugervejledning (dette dokument)
- Extra PTFE Foot Mats
- Anti-Skid USB Umbrella Rope Cable (for wired mode)
Note: Specific contents may vary slightly based on region or package version.
3. Produktet er slutview
Familiarize yourself with the components of your Darmoshark N7 mouse.
Figur 3.1: Øverst view of the Darmoshark N7 Wireless Gaming Mouse.
Figur 3.2: Side view highlighting the USB-C port and programmable side buttons.
Figure 3.3: Mouse dimensions and button assignments.
- Venstre klik: Primary mouse button.
- Højreklik: Secondary mouse button.
- Scrollhjulstast: Rul op/ned, klik med midten.
- DPI Adjustment Keys: Cycle through DPI settings.
- Wireless/OFF/Bluetooth Toggle Key: Switch connection modes.
- Return Rate Adjustment Key: Adjust polling rate.
- Frem-knap: Default forward navigation.
- Tilbage knap: Default back navigation.
- Type-C interface: Til opladning og kabelforbindelse.
4. Opsætning
4.1. Opladning af musen
- Connect the USB-C end of the charging cable to the mouse's Type-C interface.
- Connect the USB-A end of the cable to an available USB port on your computer or a USB power adapter.
- The mouse will indicate charging status (e.g., an LED indicator). A full charge typically takes a few hours.
4.2. Tilslutningstilstande
The Darmoshark N7 supports three connection modes: 2.4GHz Wireless, Bluetooth, and Wired USB-C.
4.2.1. 2.4GHz Wireless Mode (with 8K Receiver)
- Locate the 8K wireless receiver (USB dongle) in the package.
- Plug the 8K wireless receiver into an available USB port on your computer.
- Slide the toggle switch on the bottom of the mouse to the '2.4G' position.
- The mouse should automatically connect to your computer. If not, press and hold the pairing button (if available, refer to Figure 3.3) until the indicator light flashes, then release.
4.2.2. Bluetooth-tilstand
- Slide the toggle switch on the bottom of the mouse to the 'BT' (Bluetooth) position.
- The mouse's indicator light will begin to flash, indicating it is in pairing mode.
- Gå til Bluetooth-indstillinger på din computer, og søg efter nye enheder.
- Select 'Darmoshark N7' from the list of available devices to pair.
4.2.3. Wired USB-C Mode
- Tilslut USB-C-enden af opladningskablet til musen.
- Tilslut USB-A-enden af kablet til en ledig USB-port på din computer.
- Slide the toggle switch on the bottom of the mouse to the 'OFF' position. The mouse will function as a wired device and charge simultaneously.
4.3. Softwareinstallation (valgfrit)
For advanced customization of DPI, key functions, macros, and other settings, download the official Darmoshark N7 software from the manufacturer's webFølg instruktionerne på skærmen for installation.
Figur 4.1: Eksample of the mouse configuration software interface.
5. Betjeningsvejledning
5.1. DPI-justering
Use the dedicated DPI adjustment buttons (refer to Figure 3.3) to cycle through preset DPI levels. The mouse may have an indicator light to show the current DPI setting. Fine-tune DPI settings using the software.
5.2. Justering af afstemningsfrekvens
The mouse supports multiple polling rates up to 8000Hz in 2.4GHz wireless and wired modes. Use the 'Return Rate Adjustment Key' (refer to Figure 3.3) to switch between 125Hz, 500Hz, 1000Hz, 4000Hz, and 8000Hz. Bluetooth mode typically operates at a default polling rate of 125Hz.
5.3. Programmerbare knapper
The Darmoshark N7 features 5 programmable buttons. Utilize the official software to assign custom functions, macros, or multimedia controls to these buttons.
5.4. Batteriindikator
The mouse is equipped with a rechargeable lithium-ion battery. An LED indicator on the mouse will typically show the battery status (e.g., solid light for sufficient charge, flashing for low battery).
6. Vedligeholdelse
6.1. Rensning
- Frakobl musen fra computeren, før du rengør den.
- Brug en blød, fnugfri klud lidt damprengøres med vand eller en mild rengøringsopløsning til at tørre musens overflade af.
- Undgå at bruge skrappe kemikalier, slibende rengøringsmidler eller opløsningsmidler.
- Use compressed air to clear dust and debris from crevices and around the scroll wheel.
- Rengør den optiske sensor regelmæssigt med en vatpind for at sikre nøjagtig sporing.
6.2. Opbevaring
- Opbevar musen et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
- Hvis musen opbevares i længere tid, skal du sørge for, at den er fuldt opladet for at opretholde batteriets tilstand.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Musen reagerer ikke | Low battery, incorrect connection mode, receiver not plugged in, driver issue. | Charge the mouse. Ensure the mode switch is set correctly (2.4G, BT, or OFF for wired). Re-plug the USB receiver. Try a different USB port. Reinstall mouse drivers or software. |
| Lag eller intermitterende forbindelse | Interference, distance from receiver, low battery. | Reduce distance between mouse and receiver. Remove obstacles. Charge the mouse. Avoid using near other wireless devices. Try wired mode. |
| DPI/Polling Rate not changing | Incorrect button press, software conflict. | Ensure you are pressing the correct adjustment buttons. Check software settings for conflicts. Note that Bluetooth mode has a fixed polling rate. |
| Knapperne virker ikke som forventet | Software configuration, physical defect. | Check the mouse software for custom button assignments. Reset settings to default. If problem persists, contact support. |
| Mouse cursor erratic or not tracking | Snavset sensor, uegnet overflade. | Clean the optical sensor. Use the mouse on a clean, uniform surface (e.g., a mouse pad). |
8. Specifikationer
Figure 8.1: Detailed specifications and internal components.
| Feature | Detalje |
|---|---|
| Model | Darmoshark N7 |
| Forbindelse | Tri-Mode (2.4GHz Wireless, Bluetooth, USB-C Wired) |
| Sensor | PAW3950 Optisk Sensor |
| DPI (Dots Per Inch) | Op til 30000 DPI (justerbar) |
| IPS (tommer pr. sekund) | 750 IPS |
| Acceleration | 50G |
| Polling Rate (2.4G/Wired) | 125Hz/500Hz/1000Hz/4000Hz/8000Hz |
| Pollingfrekvens (Bluetooth) | Default 125Hz (Not adjustable) |
| Knapper | 5 Programmable Buttons + Scroll Wheel |
| Switch Type | HUANO Blue with Pink Dots Microswitches |
| Nøgle levetid | 80 millioner klik |
| Batteri | 300 mAh Rechargeable Lithium-ion |
| Vægt | Cirka 49 g (kun mus) |
| Dimensioner | Length: 122mm, Width: 65mm, Height: 41mm (Approximate) |
| Fødder | PTFE Foot Mats |
| Hovedkontrolchip | Realtek |
9. Garanti og support
9.1. Garantioplysninger
Darmoshark products are covered by a limited warranty against defects in materials and workmanship. The warranty period typically begins from the date of purchase. Please retain your proof of purchase for warranty claims. For specific warranty terms and conditions, refer to the warranty card included with your product or visit the official Darmoshark webwebsted.
9.2. Kundesupport
If you encounter any issues not covered in this manual or require further assistance, please contact Darmoshark customer support through their official website or the contact information provided in your product packaging. When contacting support, please have your product model (N7) and proof of purchase ready.
