Harrison RM4000-1616 Automatisk Skjult Dørlukker Brugsanvisning

Indledning

This manual provides detailed instructions for the installation, operation, and maintenance of your Harrison RM4000-1616 Automatic Concealed Door Closer. Designed for convenience, safety, and durability, this door closer is suitable for various environments including homes, offices, hotels, and restaurants. Please read these instructions carefully before installation and use to ensure proper function and longevity of the product.

Produkt overview

The Harrison RM4000-1616 is a high-quality concealed door closer featuring a gold finish and durable aluminium material. Key features include:

• Holdbar konstruktion: Crafted from robust aluminium material for long-lasting performance.
• Double Speed Adjustment: Allows precise control over door closing and opening speeds.
• Alsidig montering: Supports both door and frame mounting for flexible installation.
• Bred kompatibilitet: Suitable for doors weighing between 45kg to 90kg.
• 180 Degree Opening: Enables doors to open up to 180 degrees for seamless passage.
• Slank guldfinish: Modern aesthetic to complement various door designs.

Image 1: The Harrison RM4000-1616 Automatic Concealed Door Closer in gold finish, showing its main body and arm.

Pakkens indhold

Bekræft at alle komponenter er til stede i pakken:

• 1 x Harrison RM4000-1616 Door Closer Unit
• Installationsskruer
• Instruktionsmanual (dette dokument)

Specifikationer

Sikkerhedsoplysninger

• Brug altid passende sikkerhedsudstyr, såsom handsker og øjenbeskyttelse, under installationen.
• Ensure the door closer is installed securely to prevent injury or damage.
• Do not attempt to modify the door closer. Unauthorized modifications may void the warranty and pose safety risks.
• Hold børn og kæledyr væk fra installationsområdet.
• Ensure the door closer is correctly adjusted to prevent doors from slamming, which can cause injury or damage.

Installation

The Harrison RM4000-1616 door closer is designed for surface-mounted installation and can be mounted on the door or the frame. Follow these steps for proper installation:

1. Prepare the Door/Frame: Determine the mounting location on the door or door frame. Ensure the surface is clean, flat, and strong enough to support the door closer and the forces it will exert.
2. Markér borepunkter: Use the provided template (if included, otherwise measure carefully) to mark the drilling points for the main body of the door closer and the arm assembly.
3. Bor pilothuller: Drill pilot holes at the marked points. Ensure the drill bit size is appropriate for the provided installation screws.
4. Mount the Main Body: Secure the main body of the door closer to the door or frame using the installation screws. Ensure it is firmly attached and level.
5. Fastgør armenheden: Connect the arm assembly to the main body of the door closer. The arm typically consists of two parts that connect and then attach to the door frame (for door mounting) or the door (for frame mounting).
6. Fastgør armen: Attach the other end of the arm assembly to the door frame or door using the remaining screws. Ensure the arm is positioned correctly to allow full door movement.
7. Indledende justering: After installation, perform an initial check of the door's closing and opening action. The door should close smoothly without slamming.

Note: For specific mounting configurations (e.g., parallel arm, top jamb), refer to the detailed diagrams that may be included with your product packaging.

Betjening og justering

The RM4000-1616 features double speed adjustment, allowing you to control both the initial closing speed and the latching speed (final closing speed).

1. Initial Closing Speed Adjustment: Locate the first adjustment valve (often marked '1' or 'C1') on the door closer body. Turning this valve clockwise will decrease the closing speed (slower), and turning it counter-clockwise will increase the closing speed (faster). Adjust this to control how quickly the door moves from its open position to approximately 10-15 degrees from closed.
2. Latching Speed Adjustment: Locate the second adjustment valve (often marked '2' or 'C2'). This valve controls the speed of the final 10-15 degrees of closing, ensuring the door latches securely without slamming. Adjust this valve similarly: clockwise for slower, counter-clockwise for faster.

Vigtig: Make small adjustments (quarter turns) at a time and test the door's action after each adjustment. Over-tightening or loosening the valves excessively can damage the door closer or cause hydraulic fluid leakage.

Opretholdelse

Regular maintenance ensures optimal performance and extends the lifespan of your door closer.

• Rensning: Periodically wipe the door closer body and arm with a soft, damp klud til at fjerne støv og snavs. Undgå slibende rengøringsmidler eller opløsningsmidler.
• Inspektion: Annually inspect all mounting screws to ensure they are tight. Check the arm assembly for any signs of wear or damage.
• Funktionstjek: Regularly test the door's closing action to ensure it operates smoothly and at the desired speed. Re-adjust the speed valves if necessary.
• Smøring: The internal components are factory-lubricated and generally do not require additional lubrication. If you notice squeaking or stiffness, consult a professional.

Fejlfinding

Garanti og support

For warranty information and customer support regarding your Harrison RM4000-1616 Automatic Concealed Door Closer, please contact Harrison directly through their official website or the retailer from whom you purchased the product. It is recommended to retain your proof of purchase for any warranty claims.

Note: Some retailers or platforms may indicate that there is no warranty on this product. Please verify warranty terms directly with the manufacturer or your point of purchase.