Produkt overview
The BEPER P102GEL002 Ice Cream Maker is designed to help you easily prepare homemade ice cream, sorbets, and frozen yogurt. It features an automatic mixing system and a double-insulated aluminum freezing bowl for efficient cooling and creamy results.
Image: The BEPER P102GEL002 Ice Cream Maker in red, shown next to a glass bowl filled with homemade ice cream, garnished with a wafer stick and a decorative cookie. This illustrates the product and its delicious output.
Sikkerhedsinstruktioner
- Læs altid alle instruktioner, før du bruger apparatet.
- Nedsænk ikke motorenheden i vand eller andre væsker.
- Sørg for, at voltagDen angivne strømstyrke på apparatet stemmer overens med din lokale strømforsyning.
- Hold hænder og redskaber væk fra fryserskålen under drift for at forhindre personskader og beskadigelse af enheden.
- Træk stikket ud af stikkontakten, når det ikke er i brug og inden rengøring.
- Brug ikke apparatet med en beskadiget ledning eller stik.
- Dette apparat er kun til husholdningsbrug.
Opsætning og montering
- Før første brug: Wash the freezer bowl, mixing paddle, and lid in warm, soapy water. Rinse thoroughly and dry all parts completely. The motor unit should be wiped clean with a damp klæde.
- Frys skålen: Place the clean, dry freezer bowl in the back of your freezer for 12-24 hours, or until completely frozen. The bowl must be thoroughly frozen for proper ice cream consistency.
- Saml enheden:
- Place the frozen freezer bowl into the base unit.
- Insert the mixing paddle into the center of the freezer bowl.
- Place the motor unit onto the lid, ensuring it clicks securely into place.
- Carefully place the assembled lid and motor unit onto the freezer bowl, aligning the tabs.
Betjeningsvejledning
Følg disse trin for at tilberede dine hjemmelavede frosne godbidder:
- Forbered din blanding: Prepare your desired ice cream, sorbet, or frozen yogurt mixture according to your recipe. Ensure the mixture is chilled before adding it to the machine.
- Start maskinen: Plug in the ice cream maker. The mixing paddle will begin to rotate.
- Tilføj ingredienser: Pour your chilled mixture through the opening in the lid while the machine is running. Do not overfill; leave at least 4 cm (1.5 inches) from the top as the mixture will expand during freezing.
- Kærningsproces: Allow the machine to churn for approximately 20-40 minutes, or until the desired consistency is reached. The churning time may vary depending on the recipe and room temperature.
- Adding Solid Ingredients: If you wish to add solid ingredients like chocolate chips, nuts, or fruit pieces, do so during the last 5 minutes of the churning process through the lid opening.
- Servering: Once the desired consistency is achieved, unplug the machine. Use a plastic or wooden utensil to scoop the ice cream from the bowl. Avoid metal utensils as they can damage the freezer bowl.
- Hærdning (valgfrit): For en fastere konsistens, hæld isen i en lufttæt beholder og sæt den i fryseren i 2-4 timer.
Image: A woman carefully pouring a liquid mixture from a measuring jug into the opening of the BEPER P102GEL002 Ice Cream Maker, demonstrating the correct way to add ingredients.
Billede: Et nærbillede view inside the BEPER P102GEL002 Ice Cream Maker, showing the mixture thickening and forming into soft-serve ice cream as the paddle churns.
Image: A hand holding the motor unit and paddle assembly, showing how it lifts from the bowl, with soft ice cream visible in the bowl. This illustrates the process of checking consistency or adding mix-ins.
Vedligeholdelse og rengøring
Korrekt rengøring og vedligeholdelse vil sikre din ismaskines levetid.
- Tag stikket ud: Tag altid stikket ud af stikkontakten før rengøring.
- Skille ad: Remove the motor unit, lid, and mixing paddle from the freezer bowl.
- Rengør dele:
- The freezer bowl, lid, and mixing paddle can be washed in warm, soapy water. Rinse thoroughly and dry completely. These parts are not dishwasher safe.
- Tør motorenheden og basen af med enamp klæde. Nedsænk ikke motorenheden i vand.
- Opbevaring: Ensure all parts are completely dry before reassembling or storing. Store the ice cream maker in a clean, dry place.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Isen fryser ikke eller er for blød. |
|
|
| Machine does not start or paddle does not turn. |
|
|
| Machine does not stop automatically. | This model does not feature an automatic shut-off function. | Monitor the consistency of your ice cream and manually switch off the machine when the desired texture is achieved. |
Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | BEGRÆNSE |
| Model | P102GEL002 |
| Kapacitet | 1.8 liter |
| Farve | Rød |
| Materiale | Plast |
| Speciel funktion | Double Insulated Freezer Bowl |
| Dimensioner (L x B x H) | 27.3 x 22.7 x 22.6 cm (ca.) |
| Vægt | 2.71 kilo |
Image: A diagram showing the dimensions of the BEPER P102GEL002 Ice Cream Maker, indicating a height of 23 cm and a width of 20 cm.
Garanti og support
For warranty information, please refer to the documentation included with your purchase. Typically, BEPER products come with a standard manufacturer's warranty covering defects in materials and workmanship.
For technical support, troubleshooting assistance, or to inquire about spare parts, please contact BEPER customer service. Contact details can usually be found on the official BEPER webwebstedet eller i produktemballagen.
You can also visit the official BEPER store on Amazon for more information: BEPER Store
Officielle produktvideoer
No official product videos from the seller were found in the provided data. Please check the product page on Amazon or the manufacturer's webwebsted for tilgængelige videodemonstrationer eller vejledninger.
