Stelpro Concerto Basic ikke-programmerbar gulvvarmetermostat brugermanual

1. Introduktion

The Stelpro Concerto Basic is a non-programmable thermostat designed for precise and easy manual control of electric radiant in-floor heating systems. This unit is compatible with 120V, 208V, and 240V electrical systems and includes a Class A GFCI for enhanced safety. It comes with a floor sensor to ensure optimal comfort and efficient heating.

Billede 1: Forside view of the Stelpro Concerto Basic Non-Programmable Heated Floor Thermostat, displaying the digital screen with time and temperature.

2. Sikkerhedsoplysninger

Please read all instructions carefully before installation and operation. Failure to follow these instructions may result in fire, electric shock, property damage, or personal injury.

• All electrical work must be performed by a qualified electrician and comply with local and national electrical codes.
• Disconnect power at the main circuit breaker before installing or performing any maintenance on the thermostat.
• The integrated Class A GFCI provides protection against ground faults, making this unit suitable for high-moisture areas like bathrooms. Regularly test the GFCI function as per local regulations.
• Do not immerse the thermostat or floor sensor in water or any other liquid.

3. Pakkens indhold

Bekræft at alle komponenter er til stede i pakken:

• Stelpro Concerto Basic Non-Programmable Thermostat
• 15-foot (4.57 m) Floor Sensor
• Installationsskruer
• Brugervejledning (dette dokument)

4. Installation og opsætning

4.1 Montering af termostaten

The thermostat is designed for installation in a standard electrical box. Ensure the mounting location is away from direct sunlight, drafts, or other heat sources that could affect temperature readings.

4.2 Ledningsinstruktioner

This thermostat is compatible with 120V, 208V, and 240V electric heating systems, with a maximum load of 15 Amperes. Refer to the wiring diagram provided with the unit for specific connections. Ensure all connections are secure and comply with local electrical codes.

• Connect the incoming power supply wires to the designated LINE terminals.
• Connect the heating cable wires to the designated LOAD terminals.
• Connect the ground wire to the ground screw in the electrical box.

4.3 Floor Sensor Installation

The included 15-foot floor sensor should be installed within the floor heating system, typically embedded in the mortar or concrete, equidistant between heating cables. Ensure the sensor cable is protected from damage during installation. The thermostat allows selection between its internal ambient temperature sensor or the external floor sensor.

Image 2: The Stelpro Concerto Basic Thermostat mounted on a wall in a kitchen, demonstrating its aesthetic integration.

5. Betjeningsvejledning

5.1 Tænding og startvisning

Once power is restored, the thermostat will display the current time and temperature. The backlit digital display ensures clear readability.

5.2 Indstilling af temperaturen

Use the up and down buttons on the thermostat to manually adjust the desired setpoint temperature. The display will show the new setpoint briefly before returning to the current temperature.

5.3 Indstillinger for tid og dato

Access the menu to set the current time and date. The thermostat supports both 12-hour (AM/PM) and 24-hour formats. Refer to the detailed instructions in the full manual for menu navigation.

5.4 Adaptive Start Function

The adaptive start function allows the thermostat to learn the heating characteristics of your room. It will activate the heating system in advance to ensure the desired temperature is reached precisely at the scheduled time, optimizing comfort and energy use.

5.5 Pre-configured Schedules

Although non-programmable in the traditional sense, the Concerto Basic comes with 6 pre-configured events for weekday and weekend use. These schedules can be adjusted to suit your specific needs, providing a balance of manual control and convenience.

6. Funktioner

• Manuel kontrol: Simple and intuitive operation without the need for apps or complex programming.
• Integrated Class A GFCI: Built-in ground fault circuit interrupter with a test light for enhanced safety, especially in wet environments.
• Wide Voltage Kompatibilitet: Works with 120V, 208V, and 240V electric heating systems.
• Floor Sensor Included: Comes with a 15-ft floor sensor for accurate floor temperature monitoring.
• Adaptive Start: Ensures your space reaches the desired temperature at the scheduled time.
• Urvisning: Features a clear digital clock display.
• Universal Sensor Compatibility: Can be used with floor sensors from other brands.

7. Vedligeholdelse

The Stelpro Concerto Basic thermostat requires minimal maintenance.

• Rensning: Clean the thermostat casing med en blød, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the surface or internal components.
• GFCI test: Periodically test the GFCI function by pressing the 'TEST' button on the thermostat. The GFCI should trip, cutting power to the heating system. Reset the GFCI by pressing the 'RESET' button. If it does not trip or reset, contact a qualified electrician.

8. Fejlfinding

Hvis du støder på problemer med din termostat, kan du se følgende almindelige problemer og løsninger:

9. Specifikationer

Image 3: Dimensions of the Stelpro Concerto Basic Thermostat.

10. Garanti og support

Stelpro stands behind the quality of its products.

• Garanti: This Stelpro Concerto Basic thermostat is backed by a 3-year manufacturer warranty. Please retain your proof of purchase for warranty claims.
• Fabrikant: Stelpro
• Forretningssted: Stelpro - 1041 Rue Parent, Saint-Bruno-de-Montarville, QC J3V 6L7
• Støtte: For technical assistance, warranty inquiries, or further information, please contact Stelpro customer service. Refer to the official Stelpro webwebstedet for aktuelle kontaktoplysninger.