KIMO 1/2-inch Cordless Impact Wrench (Model 3603) User Manual

1. Vigtige sikkerhedsoplysninger

Læs alle sikkerhedsadvarsler, instruktioner, illustrationer og specifikationer, der følger med dette elværktøj. Undladelse af at følge alle instruktionerne nedenfor kan resultere i elektrisk stød, brand og/eller alvorlig personskade.

Generelle sikkerhedsadvarsler for elværktøj

• Sikkerhed på arbejdsområdet: Hold arbejdsområdet rent og godt oplyst. Rodede eller mørke områder inviterer til ulykker. Brug ikke elværktøj i eksplosive atmosfærer, såsom i nærheden af ​​brændbare væsker, gasser eller støv. Elværktøj danner gnister, som kan antænde støv eller dampe.
• Elektrisk sikkerhed: Elværktøjsstik skal passe til stikkontakten. Modificer aldrig stikket på nogen måde. Brug ikke adapterstik med jordet (jordet) elværktøj. Umodificerede stik og matchende stikkontakter reducerer risikoen for elektrisk stød.
• Personlig sikkerhed: Vær opmærksom, hold øje med, hvad du laver, og brug din sunde fornuft, når du betjener et elværktøj. Brug ikke elværktøj, mens du er træt eller påvirket af stoffer, alkohol eller medicin. Et øjebliks uopmærksomhed under betjening af elværktøj kan resultere i alvorlig personskade.
• Brug og pleje af værktøj: Tving ikke elværktøjet. Brug det korrekte elværktøj til din applikation. Det korrekte elværktøj vil gøre arbejdet bedre og mere sikkert til den hastighed, som det er designet til.
• Brug og vedligeholdelse af batteriværktøj: Genoplad kun med den oplader, der er specificeret af producenten. En oplader, der er egnet til én type batteripakke, kan skabe en brandrisiko, når den bruges sammen med en anden batteripakke.

2. Produktet er slutview

The KIMO 1/2-inch Cordless Impact Wrench is a versatile tool designed for various fastening and drilling applications. It features a powerful brushless motor, dual-speed control, and an intelligent braking system for enhanced safety and efficiency.

Figure 2.1: KIMO 1/2-inch Cordless Impact Wrench and included accessories.

Pakkens indhold

• 1x KIMO Impact Wrench
• 1x 4.0Ah Li-ion Battery
• 1x hurtigoplader
• 1x Hex Strong Lock Converter
• 4x Sockets (15mm, 17mm, 19mm, 21mm)
• 6x High-Speed Steel Drill Bits
• 3x Chromium Vanadium Steel Screwdriver Bits

Nøglefunktioner

• Industrial-Grade Brushless Motor: Delivers up to 550 Nm (406 ft-lbs) of torque and 3000 RPM for powerful and efficient operation.
• Dobbelthastighedskontrol: Seamlessly switch between high speed (up to 3000 RPM) and low speed (up to 2200 RPM) for precision and power.
• Advanced Intelligent Brake: Prevents nuts from falling during reverse operation, enhancing safety.
• Forward/Reverse Switch & Safety Lock: Easy direction changes and prevents accidental starts.
• 3-in-1 Multi-Impact Wrench: Compatible with wrench, drill, and screwdriver functions using the included hex converter.
• Efficient 4.0Ah Battery: Provides extended runtime and features 5 intelligent protection chips.
• Indbygget LED lys: Illuminates the workspace for improved visibility in dark areas.
• Ergonomisk design: Lightweight (3.8 lbs) with a comfortable non-slip grip to reduce fatigue.
• Overlegen kølesystem: Ensures stable performance and extends tool lifespan by preventing overheating.

Figure 2.2: Industrial-grade brushless copper core motor for enhanced efficiency and lifespan.

Figure 2.3: Ergonomic non-slip grip designed for comfort and reduced fatigue.

Figure 2.4: Premium cooling system for rapid heat dissipation and long-lasting operation.

3. Opsætning

3.1 Opladning af batteriet

1. Tilslut hurtigopladeren til en almindelig stikkontakt.
2. Slide the 4.0Ah Li-ion battery onto the charger until it clicks into place.
3. The charger's indicator light will show the charging status. A full charge typically takes 1 hour.
4. Når det er fuldt opladet, skal du fjerne batteriet fra opladeren.

Note: The battery features a smart power indicator to show the remaining charge level. Always ensure the battery is fully charged before extensive use.

3.2 Installation/fjernelse af batteriet

• Installation: Align the battery with the base of the impact wrench and slide it in until it locks securely.
• Fjernelse: Press the battery release button (usually located on the side of the battery) and slide the battery off the tool.

3.3 Attaching Accessories (Sockets, Drill Bits, Screwdriver Bits)

1. Ensure the tool is off and the safety lock is engaged.
2. For Sockets: Push the desired 1/2-inch square drive socket onto the anvil of the impact wrench until it clicks into place. To remove, pull the socket firmly off the anvil.
3. For Drill Bits/Screwdriver Bits (using Hex Strong Lock Converter):
   • Insert the hex strong lock converter into the 1/2-inch square drive anvil.
   • Insert the desired hex shank drill bit or screwdriver bit into the converter. The powerful locking ball will secure it.
   • To remove, pull the bit out of the converter.

Figure 3.1: Included 9-piece drill and screwdriver set.

Figure 3.2: Hex Strong-Lock Converter for versatile bit usage.

4. Betjeningsvejledning

4.1 Tænd/sluk og sikkerhedslås

• To power on, disengage the safety lock by pushing it to the side.
• To power off and prevent accidental starts, engage the safety lock by pushing it to the center position.

Figure 4.1: Forward/Reverse switch and safety lock mechanism.

4.2 Fremad/bagudgående kørsel

• The switch above the trigger controls the direction of rotation.
• Push the switch to the left for forward rotation (tightening nuts).
• Push the switch to the right for reverse rotation (removing nuts).
• Ensure the tool is stopped before changing direction.

4.3 Variabel hastighedskontrol

• The trigger provides variable speed control. Apply gentle pressure for lower speeds and increased pressure for higher speeds.
• The tool also features two adjustable speed settings (High and Low) which can be selected via a button on the tool.
  • Høj tilstand: Up to 3000 RPM for demanding tasks.
  • Lav tilstand: Up to 2200 RPM for precision work.

Figure 4.2: Speed selection and power display.

4.4 Advanced Intelligent Brake

When operating in reverse mode, the intelligent brake system will rapidly stop the rotation once the fastener is loose, preventing it from falling off. This feature enhances safety and efficiency, especially when working in tight spaces.

Figure 4.3: Intelligent Brake in action, securing fasteners during removal.

4.5 Brug af LED-lyset

The built-in LED light automatically illuminates when the trigger is pressed, providing visibility in dimly lit work areas. This eliminates the need for additional lighting.

Figure 4.4: Built-in LED light for enhanced visibility.

5. Vedligeholdelse

Regular maintenance ensures the longevity and optimal performance of your KIMO Impact Wrench.

5.1 Rengøring

• Frakobl altid batteriet før rengøring.
• Brug en blød, damp en klud til at tørre værktøjet af. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
• Hold ventilationsåbningerne fri for støv og snavs for at sikre korrekt afkøling.

5.2 Batteripleje og -opbevaring

• Opbevar batterier på et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
• Opbevar ikke batterier i afladet tilstand i længere perioder. Genoplad dem med jævne mellemrum, hvis de ikke er i brug.
• Avoid dropping or physically damaging the battery pack.

5.3 Generel opbevaring

• Store the impact wrench and its accessories in a clean, dry, and secure location, out of reach of children.
• Protect the tool from moisture and dust.

6. Fejlfinding

Se dette afsnit for almindelige problemer og deres løsninger.

7. Specifikationer

Figure 7.1: Torque capabilities for different tasks including tightening screws, shelf installation, tire disassembly, and industrial applications.

8. Garanti og support

KIMO products are manufactured to high-quality standards and are warranted against defects in materials and workmanship. For specific warranty details, please refer to the warranty card included with your product or visit the official KIMO webwebsted.

If you encounter any issues or have questions regarding your KIMO 1/2-inch Cordless Impact Wrench, please contact KIMO Customer Support:

• Webwebsted: Visit the KIMO Store on Amazon
• E-mail/Telefon: Refer to your product packaging or the KIMO webhjemmeside for de seneste kontaktoplysninger.