Brugermanual til Luxshiny digitalt termometer

Indledning

Thank you for choosing the Luxshiny Digital Thermometer. This device is designed to provide accurate temperature readings for both indoor and outdoor environments, making it ideal for monitoring temperatures in kitchen refrigerators, freezers, or other spaces. It features a clear digital display, temperature alarm functions, and easy-to-use controls. Please read this manual thoroughly before use to ensure proper operation and longevity of your thermometer.

Image: The Luxshiny Digital Thermometer showing its main display and the included external sensor cable.

Pakkens indhold

Når du åbner pakken, skal du kontrollere, at alle komponenter er til stede:

• 1 x Luxshiny Digital Thermometer Unit
• 1 x External Temperature Sensor Cable
• 1 x Brugermanual (dette dokument)

Image: The Luxshiny Digital Thermometer as packaged for retail, showing the unit and its features.

Produktegenskaber

• Digital temperaturvisning: Shows current temperature with clear digits.
• Indoor/Outdoor Mode: Allows switching between internal sensor reading and external probe reading.
• Temperature Unit Changeable: Skift nemt mellem Celsius (℃) og Fahrenheit (℉).
• Highest/Lowest Alarm Function: Set custom high and low temperature thresholds (default: highest 28℃; lowest 18℃).
• LED Alarm Indicator Light: A visual alert when temperature exceeds or falls below set alarm limits.
• MIN/MAX rekord: Records the highest and lowest temperatures measured since the last reset.
• Alsidig placering: Designed for desk-top placement or fridge mounting.

Opsætning

1. Batteri installation:

   Locate the battery compartment on the back of the thermometer. Open the cover and insert the required batteries (typically AAA, not specified in product details, please check the device for battery type) ensuring correct polarity (+/-). Close the battery cover securely.

   

   Billede: Bagsiden view of the thermometer, highlighting the battery compartment and foldable stand.

2. Sensor Cable Connection:

   Plug the external temperature sensor cable into the designated port on the side or back of the thermometer unit.
3. Placering:

   Place the main thermometer unit on a flat surface using its built-in stand, or mount it to a refrigerator/freezer door using the integrated magnets (if present). Position the external sensor probe in the area you wish to monitor, such as inside a refrigerator or freezer. Ensure the sensor cable is not pinched or damaged.

Betjeningsvejledning

1. Tænd/sluk:

   The device typically powers on automatically once batteries are inserted. There may be a dedicated power button (not explicitly shown, assume always on or auto-off after inactivity).
2. Temperature Display (IN/OUT):

   Press the "IN/OUT" button to switch between the internal temperature reading (IN) and the external sensor temperature reading (OUT). The display will indicate which mode is active.

   

   Image: The thermometer displaying a temperature reading, with the 'IN' indicator visible.

3. Changing Temperature Unit (℃/℉):

   Locate the ℃/℉ switch or button (often on the back or side, labeled "ADJ C/F"). Press or slide it to toggle between Celsius and Fahrenheit temperature units.
4. Viewing MIN/MAX Temperatures:

   Press the "MIN/MAX" button once to display the maximum temperature recorded. Press it again to display the minimum temperature recorded. Press a third time to return to the current temperature display. To reset the MIN/MAX records, press and hold the "MIN/MAX" button for a few seconds while viewing the MIN or MAX temperature.

5. Setting Temperature Alarms:

   Press the "AL" (Alarm) button. The display will show the current high alarm setting. Use the "MIN/MAX" button to adjust the value. Press "AL" again to confirm the high alarm and move to the low alarm setting. Adjust the low alarm value using the "MIN/MAX" button. Press "AL" a third time to confirm and activate the alarm. When the temperature goes above the high alarm or below the low alarm, the LED indicator will flash, and an audible alarm will sound.

Opretholdelse

• Rensning:

  Wipe the thermometer unit and sensor probe with a soft, damp cloth. Do not use abrasive cleaners or immerse the main unit in water. The external sensor probe is waterproof, but the main unit is not.

• Udskiftning af batteri:

  When the display becomes dim or the unit stops functioning, it's time to replace the batteries. Follow the battery installation steps in the Setup section.

• Opbevaring:

  If storing the thermometer for an extended period, remove the batteries to prevent leakage and damage to the device.

Fejlfinding

Specifikationer

• Model: 7004256ZCEJLNBIR2F92M6EC
• Dimensioner: Cirka 6.5 x 6 x 1.7 cm (2.56 x 2.36 x 0.67 tommer)
• Materiale: ABS
• Farve: Blue (as per product specifications, though images show white/blue)
• Temperaturområde: -50℃ til +70℃ (-58℉ til +158℉)
• Alarm Default Settings: Highest 28℃ (82.4℉); Lowest 18℃ (64.4℉)
• Strømkilde: Batteries (type not specified, typically AAA or button cell)
• Inkluderede komponenter: Measuring tool (thermometer unit and sensor)

Garanti og support

Luxshiny products are manufactured with quality and reliability in mind. For specific warranty information, please refer to the warranty card included with your purchase or visit the official Luxshiny website. If you encounter any issues or have questions regarding your Luxshiny Digital Thermometer, please contact Luxshiny customer support through the retailer's platform or the brand's official contact channels.

Der er ingen officielle produktvideoer tilgængelige til indlejring på nuværende tidspunkt.