1. Introduktion
The hygger Aquarium Air Stone HG202 is designed to efficiently diffuse oxygen into aquatic environments. Its unique volcanic-inspired design features a durable corundum material disc for fine bubbles and a stable stainless steel base. This aerator is suitable for various applications including aquariums, fish tanks, hydroponic systems, and small ponds, enhancing the oxygen solubility to support aquatic life.
Image 1: The hygger air stone effectively diffusing oxygen in an aquarium.
2. Pakkens indhold
Kontroller venligst, at alle følgende komponenter er inkluderet i din pakke:
- Aquarium Air Stone (1)
- Control Valve (1)
- Check Valve (1)
- Sugekop (1)
- T-Shaped Connector (1)
- Airline Tubing (1)
Billede 2: Overview of the hygger Aquarium Air Stone and included accessories.
3. Specifikationer
| Modelnummer | HG202 |
| Størrelse | 2.4 inch (3.5" OD x 1.1" T) |
| Produktdimensioner | 8.89 x 8.89 x 2.79 cm |
| Varens vægt | 191 g |
| Materiale | Corundum (disc), 304 Stainless Steel (base) |
| Anbefalet luftpumpeeffekt | ≥3W (Note: Higher wattage may be required for deeper water levels) |
| Tilslutningsdiameter | 3/16" (4 mm) |
Image 3: Detailed specifications and dimensions of the air stone.
4. Opsætningsvejledning
Follow these steps to set up your hygger Aquarium Air Stone:
- Pre-soak the Air Stone: Before initial use, soak the air stone in water for at least 1 hour. This helps to saturate the material and promote uniform bubble distribution.
- Connect Airline Tubing: Attach one end of the provided airline tubing to the inlet nozzle of the air stone.
- Installer kontraventil: Connect the check valve to the airline tubing. Ensure the check valve is oriented correctly (usually indicated by an arrow for 'IN' and 'OUT') to prevent water backflow into your air pump.
- Installer kontrolventil: Connect the control valve to the airline tubing after the check valve. This valve allows you to regulate the air flow.
- Connect to Air Pump: Connect the remaining end of the airline tubing to your air pump (air pump not included).
- Position the Air Stone: Place the air stone at the desired location in your aquarium or pond. The stainless steel base provides stability. Use the suction cup if additional securing is needed for the airline tubing.
- Dredge the Air Stone (Optional but Recommended): Repeatedly plug and unplug the hose connected to the air pump approximately 4 times. This action helps to clear any initial blockages and ensures more uniform bubble production.
Image 4: Step-by-step installation guide for the air stone system.
5. Betjeningsvejledning
Once the air stone is set up and connected to an operational air pump, it will begin to produce bubbles. The bubble output can be adjusted:
- Justering af luftstrøm: Use the control valve (blue knob) to regulate the strength and volume of the bubbles. Twist the knob to increase or decrease the air flow as needed for your specific aquatic environment.
- Optimal Bubble Production: The air stone is designed to produce a cascade of fine bubbles, significantly increasing oxygen solubility. Adjust the control valve until the desired bubble density is achieved.
Image 5: Demonstrating adjustable air flow from low to high bubble output.
6. Vedligeholdelse
Regular maintenance ensures optimal performance and longevity of your air stone:
- Rengøringsfrekvens: Clean the air stone once a month to prevent clogging from algae or mineral buildup.
- Rengøringsmetode: Gently brush the surface of the air stone with a soft brush (e.g., an old toothbrush) under running water to remove any accumulated debris. Avoid harsh chemicals.
- Re-soaking: After cleaning, it is recommended to re-soak the air stone for a short period before reintroducing it to the aquarium to ensure proper saturation.
Image 6: Visual guide for pre-use soaking, pump power, and regular cleaning.
7. Fejlfinding
If you encounter issues with your hygger Aquarium Air Stone, consider the following:
- Low or No Bubble Output:
- Luftpumpeeffekt: Ensure your air pump meets the recommended power of at least 3W. For deeper water levels, a higher wattage air pump may be necessary to overcome water pressure.
- Tilstopning: The air stone may be clogged. Refer to the Maintenance section (Section 6) for cleaning instructions.
- Tubing Kinks: Check the airline tubing for any kinks or blockages that might restrict air flow.
- Check Valve Orientation: Verify that the check valve is installed in the correct direction.
- Control Valve Position: Ensure the control valve is open sufficiently to allow air flow.
- Uneven Bubble Distribution:
- Initial Saturation: Ensure the air stone was properly soaked for at least 1 hour before first use.
- Dredging: Perform the dredging step (repeatedly plugging/unplugging the air pump hose) as described in Section 4, point 7.
- Tilstopning: Clean the air stone as per maintenance instructions.
8. Garanti og support
Specific warranty details for the hygger Aquarium Air Stone HG202 are not provided in this manual. For warranty information, technical support, or any product-related inquiries, please contact the manufacturer, hygger, directly or refer to the seller's return and support policies where the product was purchased.
You may find additional information or contact details on the official hygger webhjemmeside eller gennem din forhandler.
