Powerology bærbar luftkompressor jumpstarter brugermanual

1. Introduktion

Thank you for choosing the Powerology Portable Air Compressor Jump Starter. This multi-functional device is designed to provide reliable assistance in various emergency situations, including jump-starting vehicles and inflating tires. Please read this manual thoroughly before use to ensure safe and optimal performance.

Figure 1.1: The Powerology Portable Air Compressor Jump Starter, showcasing its main unit, jump starter cables (red and black clamps), and the air inflation hose. The digital display is visible on the unit.

2. Sikkerhedsoplysninger

Overhold altid følgende sikkerhedsforanstaltninger for at forhindre personskade eller beskadigelse af enheden:

• Udsæt ikke enheden for ekstreme temperaturer, direkte sollys eller fugt.
• Opbevares utilgængeligt for børn.
• Sørg for tilstrækkelig ventilation under drift og opladning.
• Enheden må ikke skilles ad eller ændres. Overlad al service til kvalificeret personale.
• Brug kun det medfølgende tilbehør og kabler.
• Undgå kortslutning af jumpstarterens kobling.amps.

3. Produktet er slutview

3.1 Komponenter

• Main Unit (Portable Air Compressor Jump Starter)
• Smart Jump Starter Cables
• Air Inflation Hose
• USB-C ladekabel
• Various Nozzle Adapters for inflation

3.2 Nøglefunktioner

• Batterikapacitet: 8800mAh
• Peak Current: 800A (for jump starting)
• Max Inflation Pressure: 150 PSI
• Inflationshastighed: 31.4 liter/minut
• Motorkompatibilitet: Op til 5.0 l benzin, 3.0 l diesel
• Power Bank funktion: Dual USB Output, including 20W Power Delivery (PD) via USB-C
• Vise: Digital LED screen for real-time pressure and battery status

Figur 3.1: En detaljeret view of the digital display on the Powerology unit, indicating battery charge, selectable pressure units (PSI, BAR, KPA, KG/CM²), and control buttons for mode selection and pressure adjustment.

4. Opsætning

4.1 Indledende opladning

Before first use, fully charge the device. Connect the provided USB-C charging cable to the device's USB-C input port and the other end to a compatible USB power adapter (not included). The digital display will indicate the charging status. A full charge typically takes approximately 2 hours with a 20W PD charger.

Figure 4.1: The Powerology device connected via USB-C cable to a smartphone, demonstrating its power bank functionality. The phone screen shows a charging indicator.

5. Betjeningsvejledning

5.1 Jumpstart af et køretøj

1. Sørg for, at jumpstarteren er mindst 50% opladet.
2. Sluk bilens tænding og alt tilbehør.
3. Tilslut den røde (+) clamp til den positive (+) pol på køretøjets batteri.
4. Tilslut den sorte (-) clamp til den negative (-) pol på køretøjets batteri.
5. Connect the smart cable connector to the jump starter port on the device.
6. Start the vehicle. If it doesn't start immediately, wait 30 seconds and try again. Do not attempt more than 3 consecutive starts.
7. Once the vehicle starts, disconnect the smart cable from the jump starter, then remove the black (-) clamp, efterfulgt af den røde (+) kl.amp.

Figure 5.1: The Powerology device with its jump starter cables connected to a vehicle battery, illustrating the process of jump starting a car in an outdoor setting.

5.2 Oppumpning af dæk

1. Connect the air inflation hose to the device's inflation port.
2. Fastgør den anden ende af slangen til dækventilen.
3. Turn on the device. The digital display will show the current tire pressure.
4. Brug knapperne '+' og '-' til at indstille det ønskede tryk.
5. Tryk på startknappen for at starte oppustningen. Apparatet stopper automatisk, når det forudindstillede tryk er nået.
6. Frakobl slangen fra dækventilen og enheden.

Figure 5.2: The Powerology device positioned next to a car tire, with the inflation hose connected, demonstrating its use as an air compressor for tire inflation.

5.3 Brug som powerbank

Connect your electronic devices (e.g., smartphones, tablets) to the USB-A or USB-C output ports on the Powerology unit using a compatible charging cable. The device will automatically begin charging your connected device.

6. Vedligeholdelse

• Rensning: Tør enheden af ​​med en blød, tør klud. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
• Opbevaring: Store the device in a cool, dry place away from direct sunlight and extreme temperatures. Ensure it is fully charged before long-term storage and recharge every 3-6 months to maintain battery health.
• Batteripleje: Undgå at aflade batteriet helt ofte for at forlænge dets levetid.

7. Fejlfinding

8. Specifikationer

9. Garanti og support

This Powerology product comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the warranty card included in your product packaging or visit the official Powerology webwebstedet. Behold din købskvittering som købsbevis.