DIGITEN THT1032 Temperatur- og fugtighedsregulator med timer Brugermanual

1. Introduktion

The DIGITEN THT1032 is a versatile temperature and humidity controller designed for precise environmental management. It features three independent outlets for controlling heating/cooling, humidification/dehumidification, and timed operations. Equipped with dual high-precision probes, this device is suitable for various applications including reptile enclosures, mushroom cultivation, plant seeding, and home brewing.

2. Nøglefunktioner

• Plug & Play-betjening: Simple setup with intuitive buttons for quick configuration.
• Dual High-Precision Probes: Separate probes for temperature (accuracy: ±0.4°C/±0.7°F) and humidity (accuracy: ±3%).
• Triple-Zone Precision Control: Three independent outlets for temperature, humidity, and timed devices.
• Stort LCD-display: Clear, real-time monitoring with switchable Fahrenheit/Celsius units.
• Climate Customization: Combine heating/cooling with humidification/dehumidification, and program the third outlet for timers.

3. Pakkens indhold

• DIGITEN THT1032 Controller Unit
• Temperatursonde
• Fugtighedssonde
• Brugermanual

4. Produktet er slutview

The DIGITEN THT1032 controller features a main unit with a large LCD display, control buttons, three power outlets, and two external probes for temperature and humidity sensing.

Billede 1: Forside view of the DIGITEN THT1032 controller, showing the display, buttons, and three power outlets.

4.1. Kontrolpanel og skærm

The front panel includes an LCD screen and four control buttons: SET, MODE, Up (▲), and Down (▼).

Billede 2: Detaljeret view of the controller's outlets and control buttons. OUT1 is for temperature, OUT2 for humidity, and OUT3 for timer functions.

• SET -knap: Used to select an outlet for configuration or confirm settings.
• MODE knap: Used to change the operating mode (e.g., heating/cooling, humidification/dehumidification, timer program).
• Op (▲) knap: Increases values or navigates menu options.
• Ned (▼) knap: Decreases values or navigates menu options.
• UD1: Temperature controlled outlet.
• UD2: Humidity controlled outlet.
• UD3: Timer controlled outlet.

4.2. Sonder

The controller comes with two separate probes: one for temperature and one for humidity. These probes are essential for accurate environmental monitoring.

Image 3: The temperature probe (left) and humidity probe (right) connected to the controller, illustrating their distinct functions.

5. Indledende opsætning

1. Tilslut prober: Plug the temperature probe and humidity probe into their respective ports on the controller. Ensure they are securely connected.
2. Placering: Position the probes in the environment you wish to monitor and control. Ensure they are not directly exposed to heat sources, moisture, or airflow that could skew readings.
3. Tænd: Plug the controller into a standard 120V AC power outlet. The display will illuminate, showing current temperature, humidity, and time.
4. Tilslut enheder: Plug your heating/cooling device into OUT1, your humidification/dehumidification device into OUT2, and any timed appliance (e.g., lights, misters) into OUT3.

6. Betjeningsvejledning

6.1. Setting Temperature Control (OUT1)

1. Tryk på SÆT button repeatedly until OUT1 is selected (indicated by a flashing OUT1 icon or similar).
2. Brug Op (▲) or Ned (▼) knapperne til at justere den ønskede måltemperatur.
3. Trykke MODE to cycle through heating (HEAT) or cooling (COOL) modes. Select the appropriate mode for your connected device.
4. Trykke SÆT to confirm the temperature and mode.
5. To set the temperature differential (hysteresis), press and hold SÆT for a few seconds when OUT1 is selected. Use Op/Ned to adjust the difference between the set point and when the device turns on/off. Press SÆT for at bekræfte.

6.2. Setting Humidity Control (OUT2)

1. Tryk på SÆT button repeatedly until OUT2 is selected.
2. Brug Op (▲) or Ned (▼) buttons to adjust the desired target humidity percentage.
3. Trykke MODE to cycle through humidification (HUMIDIFICATION) or dehumidification (DEHUMIDIFICATION) modes. Select the appropriate mode.
4. Trykke SÆT to confirm the humidity and mode.
5. To set the humidity differential, press and hold SÆT for a few seconds when OUT2 is selected. Use Op/Ned to adjust. Press SÆT for at bekræfte.

6.3. Setting Timer Control (OUT3)

1. Tryk på SÆT button repeatedly until OUT3 is selected.
2. Trykke MODE to enter the timer programming interface.
3. Bruge Op (▲) or Ned (▼) to set the ON time (hour and minute). Press SÆT for at gå til næste indstilling.
4. Set the OFF time (hour and minute) using Op/Ned og SÆT.
5. The controller supports multiple ON/OFF programs for OUT3. Refer to the on-screen prompts for additional program slots.
6. Trykke SÆT to save and exit the timer settings.

6.4. Skift af temperaturenheder (°C/°F)

To switch between Celsius and Fahrenheit, press and hold the Op (▲) button for approximately 3 seconds. The display will change accordingly.

7. Vedligeholdelse

• Rensning: Tør styreenheden af ​​med en blød, tør klud. Brug ikke slibende rengøringsmidler, og enheden må ikke nedsænkes i vand.
• Probepleje: Keep the probes clean and free from debris. Avoid bending or damaging the probe cables. If probes become dirty, gently clean them with a damp cloth and allow them to dry completely before re-use.
• Opbevaring: Når controlleren ikke er i brug, skal den opbevares køligt og tørt, væk fra direkte sollys og ekstreme temperaturer.

8. Fejlfinding

9. Tekniske specifikationer

10. Garanti og kundesupport

DIGITEN provides a one-year warranty for any quality-related issues with this product. For technical assistance, troubleshooting, or warranty claims, please contact DIGITEN customer support through the retailer where the product was purchased or visit the official DIGITEN webwebsted for kontaktoplysninger.

Gem venligst din købsbevis til garantiservice.