FOXWELL BT60 Batteritester og NT716 OBD2 Scanner Brugermanual

Indledning

This manual provides detailed instructions for the safe and effective operation of your FOXWELL BT60 Car Battery Tester and FOXWELL NT716 OBD2 Scanner. The BT60 is designed to diagnose 6V and 12V automotive batteries, while the NT716 offers comprehensive OBD2 diagnostic and special functions for various vehicle systems. Please read this manual thoroughly before using the devices to ensure proper usage and to prevent damage.

Vigtige sikkerhedsoplysninger

Always observe the following safety precautions when using the FOXWELL BT60 and NT716:

• Brug passende øjenbeskyttelse og beskyttelsestøj, når du arbejder i nærheden af ​​køretøjers batterier.
• Sørg for, at køretøjet er i et godt ventileret område.
• Avoid sparks or open flames near the battery, as batteries can produce explosive gases.
• Rør ikke ved varme motordele eller udstødningssystemer.
• Hold apparaterne tørre og rene. Udsæt dem ikke for fugt eller ekstreme temperaturer.
• Only use the provided cables and accessories.
• Hvis batterisyre kommer i kontakt med hud eller øjne, skylles straks med rigeligt vand og søges lægehjælp.

Pakkens indhold

Bekræft at alle varer er til stede i din pakke:

• FOXWELL BT60 Battery Tester Unit
• FOXWELL NT716 OBD2 Scanner Unit
• Batteri Clamps (for BT60)
• OBD-II Diagnostic Cable (for NT716)
• Brugervejledning (dette dokument)
• USB Cable (for updates/charging if applicable)

Produkt overview

FOXWELL BT60 Battery Tester

The BT60 is a compact, wireless battery tester designed for 6V and 12V batteries. It connects via Bluetooth to a smartphone application for detailed analysis.

Figure 1: FOXWELL BT60 Battery Tester. This image displays the BT60 unit with its battery clamps and a list of its key functions: State of Health (SOH), State of Charge (SOC), Load Test, Battery Voltage, Resistance Test, Cranking Test, Ripple Test, Data Storage, and Data Share.

• Batteri Clamps: For connecting to the vehicle battery terminals.
• LED-indikatorer: Provide status feedback (e.g., power, Bluetooth connection).
• Bluetooth-modul: Enables wireless communication with the companion app.

FOXWELL NT716 OBD2 scanner

The NT716 is a comprehensive diagnostic scanner featuring an Android 9.0 operating system, a touchscreen interface, and extensive vehicle coverage for various diagnostic and service functions.

Figure 2: FOXWELL NT716 OBD2 Scanner and BT60 Battery Tester. This image shows both the NT716 scanner and the BT60 battery tester, along with a smartphone displaying the BT60 app interface. The NT716 features an Android 9.0 operating system and highlights its capabilities for 4 systems diagnosis, 9 reset functions, full OBDII modes, and bi-directional control.

• Touchscreen display: For navigating menus and viewing diagnostic data.
• OBD-II Port: Connects to the vehicle's diagnostic link connector (DLC).
• USB-port: Til opladning og dataoverførsel.
• Wi-Fi-modul: For software updates and online features.

Opsætningsinstruktioner

1. FOXWELL BT60 Battery Tester Setup

1. Download appen: Søg efter the "FOXWELL BT60" app on your smartphone's app store (iOS or Android) and install it.
2. Charge the BT60 (if applicable): Ensure the BT60 unit has sufficient power.
3. Tilslut til batteri:
   • Tilslut den røde clamp til den positive (+) pol på køretøjets batteri.
   • Tilslut den sorte clamp til den negative (-) pol på køretøjets batteri.
4. Par via Bluetooth:
   • Aktiver Bluetooth på din smartphone.
   • Open the BT60 app. The app will automatically search for and connect to the BT60 unit. Follow any on-screen prompts to complete pairing.
   

   Figure 3: BT60 Wireless Connection. This image illustrates the BT60 battery tester connected to a car battery in the trunk, communicating wirelessly via Bluetooth 5.3 with a smartphone held by a user in the driver's seat, demonstrating the convenience of independent testing from a distance of up to 10 meters.

2. FOXWELL NT716 OBD2 Scanner Setup

1. Find OBD-II-porten: OBD-II-porten er typisk placeret under instrumentbrættet i førersiden. Se bilens instruktionsbog, hvis du ikke kan finde den.
2. Tilslut til køretøj: Plug the OBD-II diagnostic cable into the vehicle's OBD-II port and then connect the other end to the NT716 scanner. The scanner will power on automatically.
3. Indledende konfiguration:
   • Upon first use, the device may prompt you to select a language, time zone, and other basic settings. Follow the on-screen instructions.
   • Connect to a Wi-Fi network for software updates. Navigate to Indstillinger > Wi-Fi and select your network.
   

   Figure 4: NT716 User Interface and Connectivity. This image highlights the NT716's user-friendly touchscreen interface, showing icons for Diagnostic, Maintenance, Update, Data Manager, My Account, and More. It also illustrates "One-Click Wifi Update Free Lifetime" and options for "One-Click Send/Share Report via E-mail," "One-click Screenshot to Save Data," and "One-click Feedback Problem to Foxwell Team."

4. Softwareopdatering: It is recommended to perform a software update after initial setup to ensure you have the latest vehicle coverage and features. Navigate to the Opdatering section on the main menu and follow the prompts.

Betjeningsvejledning

1. Using the FOXWELL BT60 Battery Tester

The BT60 performs various tests to assess battery health and the vehicle's charging system.

1. Start appen: Ensure the BT60 is connected to the battery and Bluetooth is paired with your smartphone. Open the BT60 app.
2. Vælg testtype: The app will present options for different tests, including:
   • Batteritest: Measures State of Health (SOH), State of Charge (SOC), Voltage, og indre modstand.
   • Starttest: Vurderer batteriets evne til at starte motoren.
   • Opladningstest: Checks the alternator's output, including load/no-load voltage and ripple.
3. Udfør testen: Follow the on-screen instructions within the app to initiate and complete each test. This may involve starting the engine for cranking or charging tests.
4. Review Resultater: The app will display detailed results and recommendations.
   

   Figure 5: BT60 Test Results Display. This image shows a smartphone screen displaying the FOXWELL BT60 app interface, illustrating how battery status, charging test results, and cranking test results are presented clearly. It includes metrics like SOH, SOC, CCA, voltage, resistance, no-load voltage, belastning voltage, ripple, starting voltage, and start-up time.
5. Del rapporter: The app allows you to customize battery serial numbers and share diagnostic reports via image or text.
   

   Figure 6: BT60 Report Sharing. This image demonstrates the BT60 app's capability to customize battery information and share diagnostic reports. Users can input battery details and then choose to share the report as an image or text, facilitating easy record-keeping and communication.

2. Using the FOXWELL NT716 OBD2 Scanner

The NT716 provides comprehensive vehicle diagnostics and service functions.

1. Tilslut og tænd: Ensure the NT716 is connected to the vehicle's OBD-II port. The device will power on.
2. Select Diagnostic Function: Fra hovedmenuen skal du trykke på Diagnostisk to begin. The scanner will automatically identify the vehicle via Auto VIN or allow manual selection.
3. Perform System Scan:
   

   Figure 7: NT716 Four System Diagnosis. This image illustrates the NT716's ability to diagnose four key vehicle systems: Engine (Check Engine Light), ABS (ABS Light), Airbag (Airbag Light), and Transmission (Transmission Light). It also highlights features like Auto VIN, Read/Clear Codes, Live Data in Graphs, and ECU Information.

   • Læs/slet koder: Access and clear Diagnostic Trouble Codes (DTCs) from various systems (Engine, ABS, Airbag, Transmission).
   • Live data: View Sensordata i realtid i tekst- eller grafformat.
   • ECU oplysninger: Retrieve Electronic Control Unit (ECU) details.
4. Special Functions / Reset Services: Fra hovedmenuen skal du trykke på Opretholdelse to access various reset and service functions.
   

   Figure 8: NT716 Reset Functions. This image showcases nine common reset and service functions available on the NT716 scanner: Oil Reset Light, ABS Bleeding, Parking Brake, Injector Coding, BMS Reset, DPF Regeneration, SAS Calibration, TPMS, and Throttle Relearn.
   • Olie nulstilling: Nulstiller olieservicelampen.
   • ABS-blødning: Performs brake bleeding procedures.
   • Parkeringsbremse: Services the electronic parking brake (EPB).
   • Injektorkodning: Codes new injector numbers.
   • BMS-nulstilling: Nulstiller batteristyringssystemet.
   • DPF-regenerering: Initiates Diesel Particulate Filter regeneration.
   • SAS kalibrering: Kalibrerer styrevinkelsensoren.
   • TPMS: Tire Pressure Monitoring System service.
   • Genindlæring af gashåndtag: Tilpasser gasspjældhuset.
5. Bi-directional Control / Active Tests: This function allows the scanner to send commands to vehicle components to test their functionality.
   

   Figure 9: NT716 Bi-Directional Control. This image illustrates the NT716's bi-directional control capabilities, showing the scanner sending commands to various vehicle components for active testing. Examples include Test Fan Motor, Test Shift Solenoid Valve, Test Engine Coolant Temperature, and Active Grille Shutter. The process involves clicking Diagnostic, reading VIN, selecting model, clicking fault system, and performing the function test.

   • Naviger til Diagnostisk, select the vehicle, then choose the relevant system and look for Aktiv test or Tovejsstyring muligheder.
   • Follow on-screen prompts to activate components like the fan motor, shift solenoid valve, or engine coolant temperature.

Opretholdelse

• Rensning: Brug en blød, damp klud til at rengøre enheden casings. Do not use abrasive cleaners or solvents.
• Softwareopdateringer: Regularly check for and install software updates for the NT716 via Wi-Fi to ensure optimal performance and the latest vehicle coverage. For the BT60, ensure your smartphone app is updated.
• Opbevaring: Store the devices in a dry, cool environment, away from direct sunlight and extreme temperatures. Keep them in their original packaging or a protective case when not in use.
• Kabelinspektion: Periodically inspect all cables for damage. Replace any frayed or damaged cables immediately.

Fejlfinding

Specifikationer

FOXWELL BT60 Battery Tester

• Batteri Voltage Område: 6V, 12V
• Teststandarder: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB
• Forbindelse: Bluetooth 5.3 (up to 10m range)
• Funktioner: Battery Test (SOH, SOC, Voltage, Resistance), Cranking Test, Charging Test (Alternator)
• Driftstemperatur: 0°C til 50°C (32°F til 122°F)
• Opbevaringstemperatur: -20°C til 70°C (-4°F til 158°F)

FOXWELL NT716 OBD2 scanner

• Operativsystem: Android 9.0
• Vise: Touchscreen (size not specified, inferred from images)
• Forbindelse: OBD-II cable, Wi-Fi
• Diagnostiske funktioner: Read/Clear DTCs, Live Data, ECU Information, Auto VIN, 4 System Diagnosis (Engine, ABS, Airbag, Transmission)
• Særlige funktioner: Oil Reset, ABS Bleeding, Parking Brake, Injector Coding, BMS Reset, DPF Regeneration, SAS Calibration, TPMS, Throttle Relearn
• Tovejsstyring: Ja
• Opdatering: One-Click Wi-Fi Update (Lifetime Free)
• Operation Voltage: 9-18V DC (via OBD-II)

Garantioplysninger

FOXWELL products are manufactured to high-quality standards and are warranted against defects in materials and workmanship for a specified period from the date of purchase. Please refer to the warranty card included with your product or visit the official FOXWELL webwebstedet for detaljerede garantivilkår og -betingelser. Behold din købskvittering som købsbevis.

Kundesupport

If you encounter any issues or have questions regarding your FOXWELL BT60 Battery Tester or NT716 OBD2 Scanner, please contact FOXWELL customer support. You can typically find contact information on the official FOXWELL website or through the "Feedback Problem to Foxwell Team" option within the NT716 device's interface (refer to Figure 4).

• Online support: Besøg den officielle FOXWELL website for FAQs, software downloads, and support contact forms.
• E-mail support: Refer to your product packaging or the FOXWELL webwebsted for kundesupportens e-mailadresse.
• In-App Feedback: Use the feedback function within the NT716 scanner to report issues directly to the FOXWELL team.