1. Introduktion
The dockteck M.2 NVMe SATA SSD Enclosure Adapter (Model DH0005) provides a convenient and efficient solution for converting your M.2 NVMe or SATA SSD into a portable external storage device. Featuring a tool-free design and high-speed USB 3.2 Gen 2 interface, this enclosure supports data transfer rates up to 10Gbps for NVMe SSDs and 6Gbps for SATA SSDs. It is compatible with various M.2 SSD sizes (2230, 2242, 2260, 2280) and operating systems, making it a versatile accessory for data management and expansion.
2. Pakkens indhold
Kontroller venligst, at alle varer er til stede i din pakke:
- 1 x dockteck M.2 SSD Enclosure Adapter
- 1 x USB-C to C Cable (approx. 9.8 inches / 25 cm)
- 1 x USB-A to C Cable (approx. 9.8 inches / 25 cm)
- 1 x termisk pude
- 1 x Spare Mounting Pin
- 1 x Brugermanual (dette dokument)
3. Funktioner
- Højhastighedsdataoverførsel: USB 3.2 Gen 2 Type-C interface supports up to 10Gbps for NVMe SSDs and 6Gbps for SATA SSDs.
- UASP/TRIM Protocol Support: Enhances SSD read and write speeds for efficient large file overførsler.
- Værktøjsfri installation: Easy slide-open design for quick SSD insertion and removal without tools.
- Effektiv varmeafledning: Constructed with an aluminum alloy shell and includes a silicone thermal pad to maintain optimal operating temperatures and ensure data stability.
- Bred kompatibilitet: Supports M-Key and B+M Key M.2 NVMe and SATA SSDs of sizes 2230, 2242, 2260, and 2280, up to 4TB capacity.
- Bred enhedssupport: Compatible with Windows, Mac OS, Linux, and Android systems, connecting to PCs, laptops, tablets, smartphones, game consoles, and smart TVs.
- Automatisk dvaletilstand: Enters sleep mode after 15 minutes of inactivity to protect your SSD and conserve power.
4. Opsætning og installation
Følg disse trin for at installere din M.2 SSD i kabinettet:
- Åbn kabinettet: Press the button on the end of the enclosure and slide the internal tray out.
- Indsæt SSD'en: Gently insert your M.2 SSD into the slot at a 45-degree angle. Ensure the key type (M-Key or B+M Key) matches the enclosure's slot.
- Sikr SSD'en: Push the SSD down until it is flat, then secure it with the provided rubber mounting pin at the end of the SSD.
- Påfør termisk pude: Peel off the protective films from both sides of the thermal pad and place it onto the SSD chip. This helps dissipate heat to the aluminum casing.
- Luk kabinettet: Slide the internal tray back into the aluminum shell until it clicks into place.
Figure 1: Easy Installation Steps for M.2 SSD
Figure 2: Compatible M.2 SSD Sizes and Key Types
5. Betjeningsvejledning
Once your SSD is installed, connect the enclosure to your device using one of the provided USB cables. The enclosure is plug-and-play, requiring no additional drivers for most operating systems.
- Forbindelse: Use the USB-C to C cable for devices with a USB-C port, or the USB-A to C cable for devices with a standard USB-A port.
- Dataoverførsel: The enclosure will appear as an external drive on your computer or compatible device. You can drag and drop files, or use your system's file management tools to transfer data.
- LED-indikator: A clear LED indicator on the enclosure will show activity during data transfer.
- Automatisk dvale: To protect your SSD and conserve power, the enclosure will automatically enter sleep mode after 15 minutes of no read/write activity.
Video 1: Demonstration of M.2 SSD Enclosure Adapter usage, including tool-free installation, high-speed data transfer, heat dissipation features, and connectivity with various devices like smartphones and laptops.
Figure 3: Fast Data Transmission with UASP
6. Varmeafledning
The dockteck M.2 SSD Enclosure is designed with effective heat dissipation in mind to ensure stable performance and prolong the life of your SSD.
- Skal af aluminiumslegering: Det robuste aluminium casing acts as a heatsink, drawing heat away from the SSD.
- Silicone Thermal Pad: The included thermal pad creates efficient contact between the SSD and the aluminum shell, further enhancing heat transfer.
- Varmeafledningshuller: Strategically placed holes on the enclosure facilitate airflow and heat release.
Figure 4: Effective Heat Dissipation Design
7. Kompatibilitet
This enclosure offers broad compatibility with various M.2 SSDs and host devices.
- SSD Protocols: Supports both NVMe (PCIe) and SATA protocols.
- SSD Key Types: Compatible with M-Key and B+M Key M.2 SSDs. (Note: B-Key only SATA SSDs are not supported).
- SSD Sizes: Supports M.2 SSDs of form factors 2230, 2242, 2260, and 2280.
- Maksimal kapacitet: Supports M.2 SSDs up to 4TB.
- Operativsystemer: Works with Windows, Mac OS, Linux, and Android systems.
- Kompatible enheder: Can be connected to PCs, laptops, tablets, smartphones (with USB-C), game consoles, and smart TVs.
Figure 5: Wide Device and System Compatibility
8. Fejlfinding
Hvis du støder på problemer, bedes du følge følgende almindelige fejlfindingstrin:
- SSD ikke fundet:
- Sørg for, at M.2 SSD'en er korrekt isat og fastgjort i kabinettet.
- Verify that your SSD is either NVMe (M-Key or B+M Key) or SATA (B+M Key). B-Key only SATA SSDs are not supported.
- Check if the SSD is initialized and formatted. New SSDs typically need to be initialized and formatted in Disk Management (Windows) or Disk Utility (Mac OS) before use.
- Try connecting the enclosure to a different USB port on your device.
- Test med et andet USB-kabel, hvis det er muligt.
- Langsomme overførselshastigheder:
- Ensure your device's USB port supports USB 3.2 Gen 2 (10Gbps) for optimal performance. Older USB 2.0 or 3.0 ports will result in lower speeds.
- Kontroller, at dit operativsystem og dine drivere er opdaterede.
- Confirm that the SSD itself is capable of high speeds (e.g., NVMe SSDs are faster than SATA SSDs).
- Undgå at overføre mange små filesamtidig, da dette kan reducere den samlede overførselshastighed.
- Enclosure Gets Warm:
- It is normal for the aluminum enclosure to become warm during heavy use, as it is designed to dissipate heat from the SSD.
- Ensure the thermal pad is correctly installed on the SSD to facilitate heat transfer to the enclosure.
- Undgå at placere kabinettet i lukkede rum, der begrænser luftstrømmen.
- Periodiske afbrydelser:
- Ensure the USB cable is securely connected to both the enclosure and your device.
- Prøv en anden USB-port eller et andet kabel.
- Check for power management settings on your computer that might be turning off USB ports to save power.
9. Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | DH0005 |
| Produktdimensioner | 4.9 x 1.5 x 0.6 tommer (12.4 x 3.8 x 1.5 cm) |
| Varens vægt | 1.92 ounce (54.4 g) |
| Interface | USB 3.2 Gen 2 Type-C |
| Dataoverførselshastighed | Up to 10Gbps (NVMe), Up to 6Gbps (SATA) |
| Supported SSD Protocols | NVMe (PCIe) and SATA |
| Supported SSD Key Types | M-Key, B+M Key |
| Understøttede SSD-størrelser | 2230, 2242, 2260, 2280 |
| Maksimal SSD-kapacitet | 4TB |
| Kompatible operativsystemer | Windows, Mac OS, Linux, Android |
| Materiale | Aluminiumslegering |
| Farve | Sort |
| Fabrikant | dockteck |
10. Garanti og support
dockteck products are designed for reliability and performance. For warranty information, technical support, or any inquiries regarding your M.2 NVMe SATA SSD Enclosure Adapter, please contact dockteck customer service through their official webwebstedet eller forhandleren, hvor produktet blev købt.
You can visit the official dockteck store for more information: dockteck Store on Amazon.
