EVoCharge EVC50014001

EVoCharge Home 50 Level 2 EV Charger NACS Brugsanvisning

Model: EVC50014001

1. Introduktion

This manual provides essential instructions for the safe installation, operation, and maintenance of your EVoCharge Home 50 Level 2 EV Charger NACS. Please read this manual thoroughly before installation and use, and retain it for future reference. This charging station is designed for residential use to charge electric vehicles equipped with a NACS connector, including Tesla vehicles.

2. Sikkerhedsoplysninger

WARNING: Risk of Electric Shock. Improper installation or use can result in serious injury or death.

  • Installation must be performed by a qualified, licensed electrician in accordance with all local and national electrical codes and regulations.
  • Do not attempt to open, disassemble, repair, or modify the charging station. Contact EVoCharge support for service.
  • Sørg for, at ladestationen er korrekt jordforbundet.
  • Do not use the charging station if the enclosure or charging cable is damaged.
  • Hold børn væk fra ladestationen under drift.
  • Avoid submerging the charging station or charging cable in water.
  • Operate the charging station within its specified environmental conditions.

3. Pakkens indhold

Bekræft at alle varer er til stede i pakken:

  • EVoCharge Home 50 Level 2 EV Charging Station
  • 25-foot Charging Cable with NACS Connector
  • Remote Holster
  • Monteringsbeslag
  • Installationsvejledning (dette dokument)

4. Produktfunktioner

  • Level 2 EV Charging: Provides up to 45 miles of range per hour charged, significantly reducing charging times compared to Level 1 chargers.
  • NACS-stik: Compatible with Tesla vehicles and other electric vehicles utilizing the NACS charging standard.
  • Justerbar Ampalder: Bruger-valgbar amperage settings from 16A to 50A, allowing optimization for your home's electrical capacity.
  • Smart opladning: Manage charging schedules, monitor charging data, and share access via the EVoCharge mobile app and desktop portal.
  • Kablet installation: Designed for a secure and permanent 240V hardwired connection.
  • Holdbart design: NEMA 4 weatherproof rating ensures suitability for both indoor and outdoor installation.
  • UL-listet: Certificeret for sikkerheds- og kvalitetsstandarder.

5. Opsætning og installation

The EVoCharge Home 50 Level 2 EV Charger requires a 240V hardwired electrical connection. Due to the electrical requirements and safety considerations, installation must be performed by a qualified, licensed electrician.

5.1 Overvejelser før installation

  • Beliggenhed: Choose a suitable location near your parking area, ensuring the 25-foot cable can comfortably reach your vehicle's charging port. Consider indoor or outdoor placement based on your needs; the unit is NEMA 4 rated.
  • El-service: Confirm your home's electrical panel can support a dedicated 240V circuit with appropriate amperage (up to 50A).
  • Monteringsoverflade: The mounting surface must be capable of supporting the weight of the charging station and withstand the forces of cable management.

5.2 Installation Steps (for Licensed Electrician)

  1. Strømafbrydelse: Ensure all power to the installation area is disconnected at the main breaker panel.
  2. Montering: Securely attach the mounting bracket to the chosen wall surface using appropriate hardware.
  3. Ledningsføring: Connect the 240V electrical supply to the charging station's internal terminals as per the wiring diagram provided in the detailed installation guide (included in the box). Ensure proper grounding.
  4. Amperage Setting: Adjust the internal DIP switches to set the desired maximum charging amperage (16A to 50A) according to the circuit breaker rating and local codes.
  5. Enclosure Closure: Securely close the charging station's enclosure.
  6. Strømgendannelse: Restore power at the main breaker panel.
  7. Funktionstest: Verify the LED status indicator lights and perform an initial charge test.
An electrician installing the EVoCharge Home 50 EV charger on a wall, highlighting the 240V hardwired installation.

Image: A licensed electrician performing the 240V hardwired installation of the EVoCharge Home 50 charger.

EVoCharge Home 50 charger installed in a garage next to a white electric car, with text 'Adjustable Amperage 16 to 50A'.

Image: The EVoCharge Home 50 charger installed in a residential garage, demonstrating its adjustable amperage feature.

6. Betjeningsvejledning

The EVoCharge Home 50 offers both simple plug-and-charge functionality and advanced smart charging features via the mobile app.

6.1 Grundlæggende opladning

  1. Sørg for, at ladestationen er tændt.
  2. Plug the NACS connector firmly into your electric vehicle's charging port.
  3. The charging process will typically begin automatically. Monitor your vehicle's dashboard or the charger's LED indicator for charging status.
  4. To stop charging, safely disconnect the connector from your vehicle.

6.2 Smart Charging with the EVoCharge App

Download the EVoCharge mobile app from the App Store or Google Play to unlock advanced features.

A smartphone displaying the EVoCharge app dashboard and a laptop displaying the EVoCharge web portal, both showing charging data and controls.

Image: The EVoCharge mobile app and desktop portal interface, illustrating smart charging management.

  • App-parring: Follow the in-app instructions to pair your EVoCharge Home 50 charger with your smartphone.
  • Planlæg opladning: Indstil foretrukne opladningstider for at udnyttetage of off-peak electricity rates or to ensure your vehicle is ready by a specific time.
  • Skærmopladning: View real-time charging status, energy consumption, and estimated range added.
  • Adgangsstyring: Share access to your charger with other users if desired.
  • Firmwareopdateringer: The app facilitates over-the-air firmware updates to ensure your charger has the latest features and improvements.
EVoCharge Home 50 Level 2 EV Charger with a NACS connector, a smartphone displaying the EVoCharge app, and a 'Made in USA' label.

Image: The EVoCharge Home 50 charger, its NACS connector, and the accompanying mobile application interface.

EVoCharge Home 50 charger installed on a wall next to a white Tesla, showing 'Up to 45 miles of range per hour' and UL Listed/Energy Star logos.

Image: The EVoCharge Home 50 charger installed, demonstrating its compatibility with Tesla vehicles and charging speed.

7. Vedligeholdelse

The EVoCharge Home 50 charger is designed for minimal maintenance. Regular inspection and cleaning will help ensure optimal performance and longevity.

  • Rensning: Periodically wipe the exterior of the charging station and the charging cable with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the unit is powered off before cleaning.
  • Kabelinspektion: Regularly inspect the charging cable and connector for any signs of wear, cuts, fraying, or damage. If any damage is observed, discontinue use immediately and contact EVoCharge support.
  • Vedligeholdelse af stik: Keep the NACS connector clean and free of debris. Ensure the protective cap is used when the connector is not in use.
  • Holster Use: Always return the charging connector to its holster after use to protect it from environmental elements and accidental damage.

8. Fejlfinding

If you encounter issues with your EVoCharge Home 50 charger, refer to the following common troubleshooting steps:

  • Ingen strøm/LED slukket:
    • Check the circuit breaker for the charging station at your main electrical panel. Reset if tripped.
    • Ensure the charging station is properly hardwired and all connections are secure (this should be checked by a qualified electrician).
  • Opladning starter ikke:
    • Ensure the NACS connector is fully inserted into the vehicle's charging port.
    • Check your vehicle's charging settings; some vehicles have scheduled charging enabled.
    • Verify that the EVoCharge app does not have a charging schedule or delay active.
    • Inspect the charging cable and connector for any visible damage.
  • Langsom opladning:
    • Bekræft amperage setting on the charger is appropriate for your electrical circuit and vehicle.
    • Check your vehicle's charging settings; some vehicles allow adjustment of charging current.
  • Problemer med appforbindelse:
    • Ensure your home Wi-Fi network is active and the charger is within range.
    • Restart your Wi-Fi router and the charging station (by cycling its circuit breaker).
    • Ensure your EVoCharge app is updated to the latest version.

For persistent issues or problems not covered here, please contact EVoCharge customer support.

9. Specifikationer

Side view of the EVoCharge Home 50 charger with dimensions and features labeled: Slim profile, LED status indicator light, Weather-tight enclosure, Hardwired power connection, 25ft flexible charging cable. Dimensions are 13.75 inches height, 9.7 inches width, 3.5 inches depth.

Billede: Detaljeret side view of the EVoCharge Home 50 charger with key features and dimensions.

SpecifikationDetalje
ModelnummerEVC50014001
Input bindtage240 volt (AC)
Nuværende vurderingJusterbar 16-50 Amps
Connector TypeNACS (Tesla Compatible)
Kabellængde25 fod
InstallationstypeHardwired
Bedømmelse af kabinetNEMA 4 (Indoor/Outdoor)
Produktmål (H x B x D)13.75 x 9.7 x 3.5 tommer
Varens vægt11.68 pund
CertificeringerUL-listet
ForbindelseWi-Fi (for smart features)

10. Garanti og support

For warranty information, please refer to the warranty card included with your product or visit the official EVoCharge website. If you require technical assistance, troubleshooting beyond this manual, or have questions regarding your EVoCharge Home 50 charger, please contact EVoCharge customer support through their official channels.

Fabrikant: EVoCharge

Webwebsted: Visit the EVoCharge Store

Relaterede dokumenter - EVC50014001

Preview EvoCharge EVSE 50 | Produktmanual til Home 50
This manual provides detailed instructions for the EvoCharge EVSE 50 and Home 50 Level 2 Electric Vehicle Charging Station, covering installation, operation, connectivity, troubleshooting, and specifications. Learn how to safely and efficiently charge your electric vehicle at home.
Preview EvoCharge: Sådan uploader du en RFID-kortautorisationsliste
Instruktionsvejledning til upload af RFID-kortautorisationslister til EvoCharge EVSE'er. Lær, hvordan du tilslutter, konfigurerer indstillinger og administrerer adgang til ladestationer.
Preview EvoCharge 50A elbilsladestation hurtig installationsvejledning
Trin-for-trin-vejledning til installation af EvoCharge 50A EVSE og Home 50 ladestationer til elbiler. Indeholder sikkerhedsoplysninger, monterings-, ledningsførings- og opsætningsvejledning.
Preview Installationsvejledning til EVOCHARGE EVC0201 retraktor
Installationsvejledning til EVOCHARGE EVC0201-optrækkeren, et kabelhåndteringssystem til elektriske køretøjer. Indeholder sikkerhedsinstruktioner, udpakning, planlægning, værktøj og installationstrin til forsyningsudstyr til elektriske køretøjer.
Preview EVOCHARGE EVSE 50A ladestation til elbiler - hurtig installationsvejledning
Lyninstallationsvejledning til EVOCHARGE EVSE 50A ladestation til elbiler, der dækker sikkerhedsinstruktioner, montering, ledningsføring og specifikationer.
Preview EvoCharge 50AEV ladestationer hurtig installationsvejledning | EVSE, EVC50, EVC50 LTE
Lyninstallationsvejledning til EvoCharge 50AEV EVSE, EVC50 og EVC50 LTE ladestationer. Indeholder sikkerhedsoplysninger, forberedelse, montering, ledningsføring og specifikationer for opladning af elbiler.