Indledning
Thank you for choosing the WdtPro Solar Lights Outdoor Motion Sensor. This manual provides essential information for the safe and efficient operation of your new solar light. Please read it thoroughly before installation and retain it for future reference.

Image: The WdtPro Solar Lights Outdoor Motion Sensor, featuring three adjustable light heads and a solar panel, mounted on an exterior wall, providing bright illumination to a deck area at night.
Produktegenskaber
- Ultra-lys belysning: Equipped with 150 advanced COB LED chips and 45° wide-angle Fresnel lenses, delivering 3500 lumens for 360° wraparound brightness.
- Højeffektivt solpanel: Features an upgraded glass panel made of aerospace-grade monocrystalline silicon with a 50% conversion rate, allowing for faster charging.
- Advanced PIR Motion Sensing: Detects human or pet movement up to 60ft within a 180-degree range, covering approximately 1800 sq ft.
- Flere lystilstande: Offers three distinct operating modes for various security and lighting needs.
- Holdbar og vandtæt: Constructed with ABS+PC shell, IP65 waterproof rating, and condensation evacuation technology for extreme weather resilience.
- Justerbare lyshoveder: Three independently adjustable light heads provide flexible illumination angles without dead spots.

Billede: Detaljeret view of the light head, illustrating the 150 COB LED chips and Fresnel lenses designed for 3500 lumens and 360-degree illumination.

Image: Illustration of the upgraded glass solar panel's efficiency, demonstrating a 50% conversion rate, 3 hours of charging for 15 hours of working time, and over 800 motion sensing cycles.
Pakkens indhold
Kontroller venligst, at alle komponenter er til stede, før installationen påbegyndes:
- Solar Motion Sensor Outdoor Light (1 unit)
- Wall Bracket (1 unit)
- Skruer (2 enheder)
- Plastankre (2 enheder)
- Brugervejledning (1 enhed)

Image: A visual representation of the package contents, including the solar light unit, wall bracket, screws, plastic anchors, and the user manual.
Opsætning og installation
Follow these steps for optimal performance and safety:
- Choose an Optimal Location: Select a location that receives direct sunlight for at least 6-8 hours daily to ensure the solar panel charges effectively. Avoid areas under eaves, trees, or other obstructions that might block sunlight or motion detection.
- Monteringshøjde: For best motion detection, install the light at a height of approximately 6-10 feet (1.8-3 meters) from the ground.
- Markér borepunkter: Use the wall bracket as a template to mark the two drilling points on the desired mounting surface.
- Bore huller: Bor huller på de markerede punkter. Sæt plastikpluggene i de borede huller.
- Fastgør beslaget: Align the wall bracket with the anchors and secure it using the provided screws.
- Fastgør lyset: Slide the solar light unit onto the secured wall bracket until it clicks into place.
- Juster lyshoveder og solpanel: Adjust the three light heads to cover the desired illumination area. The solar panel can also be angled to maximize sun exposure. The light heads are adjustable up to 135 degrees vertically and 90 degrees horizontally.

Image: A technical diagram illustrating the physical dimensions of the solar light and the range of motion for its adjustable light heads, allowing for no-dead-angle lighting.
Betjeningsvejledning
The WdtPro Solar Light features a touch control method to cycle through its three lighting modes:
Mode 1: Security Burst (Motion Sensor Mode)
The light remains off until motion is detected. Upon detection, it illuminates at 100% brightness for 25 seconds, then turns off. This mode is designed for maximum security and energy saving.
Mode 2: 12hr Night Guard (Low Light + Motion Sensor)
The light stays on at a continuous 20% ambient brightness throughout the night. When motion is detected, it brightens to 100% for 25 seconds, then returns to 20% brightness. Ideal for continuous subtle illumination with enhanced security.
Mode 3: Strong Light (Motion-Activated 100% Brightness)
The light remains off during the day. At night, it activates to 100% brightness when motion is detected and stays on as long as motion is present, turning off after 25 seconds of no motion. This mode provides strong, on-demand lighting.
To switch between modes, locate the touch control button, usually on the underside or back of the main unit, and press it repeatedly until the desired mode is active.

Image: A visual guide to the three operational modes, detailing how the light behaves in response to motion and ambient light conditions for each setting.
Opretholdelse
Regular maintenance ensures the longevity and optimal performance of your solar light:
- Rengør solpanelet: Tør solpanelet regelmæssigt af med en blød kludamp klud til at fjerne støv, snavs, blade eller sne. Et rent panel sikrer maksimal absorption af sollys og opladningseffektivitet.
- Tjek for forhindringer: Ensure no new obstructions (e.g., growing branches, new structures) are blocking direct sunlight to the solar panel or interfering with the motion sensor's field of view.
- Undersøg for skader: Occasionally check the light unit, wiring, and mounting for any signs of wear, damage, or loose connections.
- Batteripleje: While the battery is designed for long life, prolonged periods of low sunlight may reduce its charge. If possible, ensure the light receives adequate sunlight, especially after extended cloudy periods.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tænder ikke om natten. |
|
|
| Bevægelsessensoren registrerer ikke bevægelse. |
|
|
| Lyset lyser konstant eller blinker. |
|
|
Specifikationer
| Mærke | WdtPro |
| Modelnavn | Solar Flood Lights Outdoor Motion Sensor |
| Modelnummer | TWL002 |
| Lyskildetype | LED (150 COB LED chips) |
| Lysstyrke | 3500 lumen |
| Farvetemperatur | 7000 Kelvin (Cool Light) |
| Strømkilde | Solcelledrevet |
| Batterikapacitet | 2500mAh (genopladeligt) |
| Opladningstid | Approx. 3 hours (direct sunlight) |
| Runtime | Op til 15 timer (efter fuld opladning) |
| Bevægelsessensorens detektionsområde | Op til 60 fod (18.3 meter) |
| Bevægelsessensordetekteringsvinkel | 180 grader |
| Vandmodstandsniveau | IP65 vandtæt |
| Materiale | ABS+PC Shell, Glass Solar Panel |
| Produktdimensioner | 12 cm L x 5 cm B x 8.6 cm H (omtrentlig) |
| Varens vægt | 1 pund (omtrentlig) |
| Installationstype | Vægmontering |
Garanti og support
WdtPro provides a limited warranty for this product. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact WdtPro customer support.
If you encounter any issues or have questions regarding your WdtPro Solar Lights Outdoor Motion Sensor, please contact our customer support team for assistance. You can typically find contact information on the product packaging or the official WdtPro webwebsted.
Fabrikant: WdtPro
Mærkebutik: Visit the WdtPro Store on Amazon