Westgate SL-20W-MCT-BZ-P LED Security Light User Manual

Indledning

This manual provides detailed instructions for the installation, operation, and maintenance of your Westgate SL-20W-MCT-BZ-P LED Security Light. This high-performance outdoor lighting fixture features a PIR motion sensor and selectable color temperatures, designed to enhance security and illumination for various outdoor applications.

Sikkerhedsoplysninger

ADVARSEL: To avoid electric shock, fire, or serious injury, read and follow all instructions carefully before installing or operating this fixture.

• Afbryd altid strømmen ved afbryderen før installation eller service.
• Installationen skal udføres af en kvalificeret elektriker i overensstemmelse med alle lokale og nationale el-forskrifter.
• Sørg for, at armaturet er korrekt jordet.
• Må ikke installeres på overflader, der ikke er strukturelt solide.
• Do not connect to a dimmer switch unless specified as dimmable. This product is dimmable.
• Se ikke direkte ind i LED-lyskilden, når den er tændt.

Hvad er der i æsken

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

• Westgate SL-20W-MCT-BZ-P LED Security Light fixture
• LED-linse (forinstalleret)
• Mounting hardware (screws, wire nuts, gasket) - (Antaget, som typisk for sådanne produkter)
• Instruktionsmanual (dette dokument)

Produkt overview og funktioner

The Westgate SL-20W-MCT-BZ-P is a robust LED security light designed for outdoor use. Key features include:

• Alsidig farvetemperatur: Selectable 3000K (Warm White), 4000K (Cool White), or 5000K (Daylight) to suit your preference.
• PIR Motion Sensor: 180-degree detection angle for enhanced security.
• Smart Dimming Feature: Allows 80% dimming or off when no motion is detected.
• Holdbar konstruktion: IP65 wet location rated, high-impact polycarbonate lens, and dark bronze aluminum finish for harsh weather resistance.
• Høj belysning: 1900 lumens output with 20W power consumption, offering 95 lm/W efficacy.
• Lang levetid: Nominel til 70,000 timer.
• Wide Voltage Kompatibilitet: Operates on 100-277V.

Billede: Forside view of the Westgate SL-20W-MCT-BZ-P LED Security Light, showcasing its dual heads and integrated motion sensor.

Billede: Bund view of the Westgate SL-20W-MCT-BZ-P LED Security Light, highlighting the adjustable control dials for motion sensor settings and color temperature selection.

Opsætning og installation

Follow these steps for proper installation of your security light:

1. Forbered til installation:
   • Turn off power at the circuit breaker or fuse box to the junction box where the light will be installed.
   • Sørg for, at monteringsfladen er ren, tør og strukturelt sund.
2. Montering af armaturet:
   • Attach the mounting plate (if separate) to the junction box using the provided screws.
   • Feed the electrical wires from the junction box through the center hole of the mounting plate.
   

   Billede: Top view of the Westgate SL-20W-MCT-BZ-P LED Security Light, indicating the "UP" mounting orientation for correct sensor function.

3. Ledningsforbindelser:
   • Tilslut sort ledningen fra armaturet til sort (varm) ledning fra samledåsen ved hjælp af en trådmøtrik.
   • Tilslut hvid ledningen fra armaturet til hvid (neutral) ledningen fra samledåsen ved hjælp af en trådmøtrik.
   • Tilslut grøn (or bare copper) ground wire from the fixture to the ground wire from the junction box using a wire nut.
   • Stik forsigtigt alle ledninger ind i samledåsen.
   

   Billede: Bagside view of the Westgate SL-20W-MCT-BZ-P LED Security Light, illustrating the wiring connections (black, white, green/ground) and the "UP" arrow for correct mounting.
4. Sikre armaturet:
   • Align the fixture with the mounting plate and secure it with the provided screws. Ensure a tight seal against the mounting surface to prevent water intrusion.
5. Juster lyshoveder:
   • Loosen the adjustment screws on the light heads and pivot them to the desired angle for optimal illumination coverage. Tighten screws firmly once adjusted.
6. Gendan strøm:
   • Tænd for strømmen igen ved afbryderen.

Betjeningsvejledning

Your Westgate LED Security Light features adjustable settings for color temperature, motion sensor sensitivity, and time duration.

1. Color Temperature Selection (MCT)

The fixture allows you to select between three color temperatures: 3000K, 4000K, and 5000K. The switch for this selection is located on the bottom of the base, typically near the motion sensor.

• 3000K: Warm White, ideal for a cozy, inviting ambiance.
• 4000K: Cool White, a neutral white light suitable for general outdoor illumination.
• 5000K: Daylight, a bright, crisp white light for maximum visibility and security.

To change the color temperature, locate the small switch on the underside of the fixture's base and slide it to your desired setting (3K, 4K, or 5K).

2. Motion Sensor Adjustments

The PIR motion sensor has adjustable dials, usually located on the bottom of the sensor unit. These typically control LUX (light sensitivity), TIME (duration), and SENS (motion sensitivity).

• LUX (lysfølsomhed):
  • Adjusts the ambient light level at which the sensor will activate the light.
  • Turn towards the "sun" icon for activation during both day and night.
  • Turn towards the "moon" icon for activation only during low light conditions (dusk to dawn).
• TIME (Duration):
  • Angiver, hvor længe lyset forbliver tændt, efter der er registreret bevægelse, og der ikke registreres yderligere bevægelse.
  • Typically adjustable from a few seconds to several minutes.
• SENS (Motion Sensitivity):
  • Controls the detection range of the motion sensor.
  • Turn clockwise to increase sensitivity and detection range (up to 68 feet).
  • Turn counter-clockwise to decrease sensitivity and detection range (down to 19 feet).
  • Note: Maximum sensitivity may cause false triggering from small animals or distant objects.

Image: Diagram showing the adjustable motion detection zone from 19 to 68 feet and various detection angles (150°, 180°, 240°, 270°).

Opretholdelse

The Westgate LED Security Light is designed for minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:

• Rensning: Rengør armaturet regelmæssigt med en blød, tør klud.amp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or lens. Ensure power is off before cleaning.
• Inspektion: Undersøg regelmæssigt armaturet for tegn på skader, løse ledninger eller slid. Ret eventuelle problemer omgående.
• Linse: Keep the polycarbonate lens clear of dirt, dust, and debris to maintain optimal light output and motion sensor performance.

Fejlfinding

If you experience issues with your security light, refer to the following common problems and solutions:

Specifikationer

Detailed technical specifications for the Westgate SL-20W-MCT-BZ-P LED Security Light:

Image: Diagram detailing electrical, mechanical, lighting, and application specifications for the SL-20W-MCT-BZ-P model.

Image: Photometric data and additional views (side, front, back) of the Westgate SL-20W-MCT-BZ-P LED Security Light.

Garanti og support

This Westgate LED Security Light is backed by a 7 års garanti fra købsdatoen, dækker defekter i materialer og udførelse ved normal brug.

For technical support, warranty claims, or general inquiries, please contact Westgate customer service:

• Telefon: (877) 805-2252
• Webwebsted: www.westgatemfg.com

Please have your model number (SL-20W-MCT-BZ-P) and date of purchase available when contacting support.