ADT 4x4 Crystal Clear Ice Maker

Vigtige sikkerhedsoplysninger

Læs venligst alle instruktioner omhyggeligt, inden du bruger dette apparat. Gem denne manual til senere brug.

• Sørg for, at apparatet er placeret på en stabil, plan overflade væk fra direkte sollys og varmekilder.
• Apparatet, netledningen eller stikket må ikke nedsænkes i vand eller andre væsker.
• Unplug the ice maker from the power outlet before cleaning or performing any maintenance.
• Dette apparat er ikke beregnet til brug af personer (inklusive børn) med nedsatte fysiske, sensoriske eller mentale evner, eller mangel på erfaring og viden, medmindre de er blevet under opsyn eller instruktion i brugen af ​​apparatet af en person, der er ansvarlig for deres sikkerhed. .
• Brug kun drikkevand i ismaskinen.
• Brug ikke apparatet med en beskadiget ledning eller stik.
• Hold ventilationsåbningerne fri af forhindringer.

Produkt overview

The ADT 4x4 Crystal Clear Ice Maker (Model hzb-30n002) is designed to produce clear ice cubes for various uses. This compact unit is suitable for countertop placement or can be integrated into outdoor courtyard setups as a built-in appliance.

Figure 1: ADT 4x4 Crystal Clear Ice Maker. The image shows the ice maker unit next to a glass containing a large, clear ice cube and whiskey.

Figure 2: Interior Double Drawer Design. This image displays the ice maker with its door open, revealing two pull-out drawers for ice storage and the internal ice-making components.

Pakkens indhold

Bekræft at alle varer er til stede i pakken:

• ADT 4x4 Crystal Clear Ice Maker Unit
• Is Scoop
• Brugervejledning (dette dokument)

Specifikationer

Note: The product title specifies "4x4 Crystal Clear Ice Cubes" while several images refer to "Nugget Ice". Please refer to product packaging or manufacturer for clarification on the exact ice type produced.

Installation og opsætning

1. Placering

Place the ice maker on a firm, level surface. Ensure adequate ventilation around the unit. Maintain a minimum of 5 inches (12.7 cm) of space on the back and sides for proper air circulation. Avoid placing near heat sources or in direct sunlight.

For built-in installations, refer to the detailed installation drawing below for precise measurements and requirements.

Figure 3: Built-in Installation Example. This image shows the ice maker seamlessly integrated into an outdoor kitchen countertop, demonstrating a potential built-in setup.

Figure 4: Installation Drawing. This diagram provides detailed dimensions and clearances for installing the ice maker as a built-in unit, including minimum cabinet depth, width, and height, as well as floor drain access hole requirements.

Figure 5: Product Dimensions. The image shows the ice maker with its height (31.9 inches), width (15.0 inches), and depth (16.3 inches) labeled, providing a visual reference for its size.

2. Indledende rengøring

Before first use, clean the interior of the ice maker. Use a soft cloth with a mild detergent and warm water. Rinse thoroughly and dry completely. Do not use abrasive cleaners or solvents.

3. Water Connection (if applicable)

If your model requires a direct water line connection, ensure it is installed by a qualified plumber according to local codes. For models with a manual water reservoir, fill the reservoir with potable water up to the maximum fill line.

4. Strømtilslutning

Plug the ice maker into a grounded electrical outlet. Ensure the voltage opfylder apparatets krav.

Betjeningsvejledning

Kontrolpanel overview

Figure 6: Easy to Use Control Panel. This image highlights the digital display and buttons on the ice maker, including 'TIMER', 'CLEAN', 'ON/OFF', and '+' / '-' buttons for settings adjustment.

• ON/OFF knap: Tænder eller slukker for enheden.
• TIMER knap: Activates the timer function for delayed start or stop.
• CLEAN knap: Starter selvrensningscyklussen.
• '+' / '-' knapper: Adjust settings such as timer duration or ice cube size (if applicable).
• Vise: Shows current status, timer settings, and error codes.

At lave is

1. Ensure the water reservoir is filled with potable water.
2. Tryk på ON/OFF button to start the ice-making process.
3. The unit will automatically begin producing ice. The first batch of ice may take longer to produce.
4. Ice production time is approximately 25 minutes per batch.
5. The ice maker can produce up to 66 pounds of ice per day.

Figure 7: Crystal Clear 4x4cm Ice Cubes. This image shows various glasses containing large, clear ice cubes, illustrating the type of ice produced by the machine.

Figure 8: Nugget Ice Applications. This image displays nugget ice being used in drinks, for chilling food like sashimi, and as an ice compress, highlighting its versatility and the unit's daily production capacity of 66 lbs.

Timer funktion

To set a delayed start or stop time:

1. Tryk på TIMER knap.
2. Brug '+' og '-' buttons to set the desired delay time in hours.
3. The timer will activate after a few seconds of inactivity, and the unit will start or stop according to the set time.

Opretholdelse

Regelmæssig rengøring

Regelmæssig rengøring er afgørende for optimal ydeevne og hygiejne.

• Ydre: Tør ydersiden af ​​med en blød, damp klæde.
• Indre:
  1. Tag stikket ud af stikkontakten.
  2. Remove any remaining ice and drain the water reservoir.
  3. Use a solution of water and white vinegar or a mild ice maker cleaner to clean the water tank and ice storage area.
  4. Skyl grundigt med rent vand.
  5. Dry all surfaces before reassembling and plugging in the unit.
• Selvrensende funktion:

  The unit features a self-cleaning cycle. To activate:

  1. Sørg for, at vandbeholderen er fyldt.
  2. Tryk på REN knappen på kontrolpanelet.
  3. The unit will run a cleaning cycle. Follow any on-screen prompts.
  4. After the cycle, drain the water and rinse the interior.

Fejlfinding

Hvis problemet fortsætter efter at have forsøgt disse løsninger, bedes du kontakte kundesupport.

Garantioplysninger

This ADT ice maker typically comes with a manufacturer's warranty. Please refer to the warranty card included with your product or contact ADT customer support for specific details regarding warranty coverage, terms, and conditions. Keep your proof of purchase for warranty claims.

Kundesupport

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact ADT customer support. Contact information can usually be found on the product packaging, the manufacturer's webwebstedet eller din købsdokumentation.

When contacting support, please have your model number (hzb-30n002) and proof of purchase readily available.