TOTAL TIWLI20401 Cordless Impact Wrench User Manual

1. Introduktion

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your TOTAL TIWLI20401 Cordless Impact Wrench. Please read this manual thoroughly before using the tool and retain it for future reference.

The TOTAL TIWLI20401 is a powerful and efficient cordless impact wrench designed for fastening and loosening applications. It features a brushless motor for enhanced durability and performance, a 1/2 inch square drive, and an integrated LED work light.

2. Sikkerhedsinstruktioner

Overhold altid grundlæggende sikkerhedsforanstaltninger for at reducere risikoen for brand, elektrisk stød og personskade, når du bruger elværktøj.

• Sikkerhed på arbejdsområdet: Hold arbejdsområdet rent og godt oplyst. Rodede eller mørke områder indbyder til ulykker. Brug ikke elværktøj i eksplosive atmosfærer, f.eks. i nærheden af ​​brandfarlige væsker, gasser eller støv.
• Elektrisk sikkerhed: Undgå kropskontakt med jordforbundne overflader. Udsæt ikke elværktøj for regn eller våde forhold.
• Personlig sikkerhed: Brug altid øjenbeskyttelse. Brug høreværn, når du bruger værktøjet i længere tid. Klæd dig korrekt på; undgå løstsiddende tøj eller smykker. Fastgør langt hår.
• Brug og pleje af værktøj: Tving ikke elværktøjet. Brug det korrekte elværktøj til din opgave. Frakobl batteriet fra elværktøjet, før du foretager justeringer, skifter tilbehør eller opbevarer elværktøjet.
• Batteripakkesikkerhed: Use only the specified battery pack for this tool. Do not incinerate the battery pack even if it is severely damaged.

3. Komponenter og funktioner

Familiarize yourself with the key components and features of your TOTAL TIWLI20401 Cordless Impact Wrench.

Figur 1: Hoved view of the TOTAL TIWLI20401 Cordless Impact Wrench, highlighting its ergonomic design and brushless motor branding.

• Børsteløs motor: Provides higher efficiency, longer durability, and reduced maintenance compared to brushed motors.
• 1/2 Inch Square Drive: Ensures a secure and stable connection for various socket sizes.
• Trigger med variabel hastighed: Allows for precise control over the rotation speed, adapting to different application requirements.
• Frem/Baglæns kontakt: Easily change the direction of rotation for fastening and loosening tasks.
• Integreret LED-arbejdslys: Oplyser arbejdsområdet for forbedret udsyn under svagt oplyste forhold.
• Højt drejningsmoment output: Offers a fastening torque of 400Nm and a nut-busting torque of 550Nm for demanding applications.

Figure 2: The impact wrench shown with common socket sizes (17mm, 19mm, 21mm) and its packaging. Note that the battery and charger are sold separately.

4. Opsætning

4.1. Batteriinstallation (batteri og oplader sælges separat)

1. Sørg for, at batteripakken er fuldt opladet før brug.
2. Align the battery pack with the battery port at the base of the impact wrench.
3. Skub batteripakken ind i porten, indtil den klikker sikkert på plads.
4. To remove, press the battery release button (if present) and slide the battery pack out.

4.2. Fastgørelse af stikkontakt

1. Ensure the tool is switched off and the battery is removed before attaching or removing sockets.
2. Vælg den passende 1/2-tommer slagtop med firkantet til din anvendelse.
3. Push the socket firmly onto the square drive anvil until it locks into place.
4. To remove, pull the socket off the anvil. Some sockets may require pulling back a retaining ring or pin.

5. Betjeningsvejledning

5.1. Tænd/sluk

The tool is powered on by pressing the variable speed trigger and powered off by releasing det.

5.2. Selecting Rotation Direction (Forward/Reverse)

The forward/reverse switch is located above the trigger. Push the switch to the left for forward rotation (fastening) and to the right for reverse rotation (loosening). Ensure the switch is in the center position to lock the trigger and prevent accidental starting.

5.3. Variabel hastighedskontrol

The tool's speed is controlled by the pressure applied to the trigger. Pressing the trigger lightly results in lower speed, while pressing it fully increases the speed up to the maximum. This allows for precise control depending on the task.

5.4. Fastening and Loosening

1. Select the correct socket and attach it securely.
2. Indstil frem/tilbage-kontakten til den ønskede retning.
3. Placer stikkontakten på fastgørelseselementet.
4. Gradually press the trigger to start the tool. Apply steady pressure to the tool to prevent kickback.
5. For fastening, tighten until the desired torque is achieved. For loosening, continue until the fastener is free.

Caution: Always ensure the fastener and socket are correctly aligned to prevent damage to both the tool and the fastener.

6. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer din slagnøgles levetid og optimale ydeevne.

• Rensning: Hold værktøjets ventilationsåbninger rene for at forhindre overophedning. Brug en blød, tøramp klud til at rengøre huset. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
• Opbevaring: Store the tool and battery pack in a cool, dry place, away from direct sunlight and moisture. Keep out of reach of children.
• Batteripleje: If the battery pack is not used for extended periods, charge it periodically to maintain its capacity. Do not store discharged battery packs.
• Inspektion: Periodically inspect the power tool for any damaged parts, loose screws, or worn components. Have any necessary repairs performed by qualified service personnel.

7. Fejlfinding

Se dette afsnit for almindelige problemer og deres løsninger.

If the problem persists after attempting these solutions, contact TOTAL customer support or a qualified service center.

8. Specifikationer

9. Garanti og support

For warranty information, service, or technical support, please refer to the warranty card included with your product or visit the official TOTAL webwebsted. Gem din købskvittering som købsbevis i tilfælde af garantikrav.

For further assistance, you may contact TOTAL customer service through their official channels.